2025 GMC Acadia Mud Flaps

Hey Matt, welcome back! The Rock Tamers Adjustable Mud Flap #RT67VR is designed for a 2" receiver. The factory hitch on your 2024 GMC Sierra 3500 is 2-1/2" so you need the #ERT00110 instead. If you want the option with the screen that would…

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

Welcome back Bill! For your 2020 Ford F-350 Dually, the Rock Tamers Adjustable Mud Flap System with Rock Screen item #RT77VR is going to be the correct one if you went with the upgraded 3" hitch receiver Ford offered and use 3" ball mounts.…

Thanks for your question Jason! We don't currently have an etrailer installation video showing the Access Rockstar Mud Flap #A34FR62ZQ installed on a 2025 GMC Yukon Denali. However, Access (Agri-Cover) does provide installation resources for the…

Hey Mark, thanks for reaching out. Yes, we can provide all the parts you need to install a 7-way plug and brake controller on your 2011 Chevy Express Van. I know you mentioned a 6-way plug but the 7-way is actually the standard for trailers with…

Hello Mike, Thank you so much for the detailed information, most helpful! For the leaf springs, you will want to go with (6) of the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR. Since you have 7K axles, these are the…

Hey Dan, yes the Access Rockstar Custom Mud Flap part #A62ZX does fit your 2023 GMC Sierra 3500HD AT4. This is a confirmed fit for the dually and non-dually models of the truck.

Hey Marcus, congrats on the new truck! Since your Silverado 3500 has the B&W Turnoverball item #BWGNRK1016, I recommend the B&W Companion item #BWRVK3500. This hitch has a 20,000 lbs capacity and will connect directly to the square gooseneck…

The heat shield part #RT76FR that you referenced was designed to prevent the type of damage you have on your Rock Tamers mud flap so this would be best solution. Other option is to have a turn down welded to your exhaust tip so that it is directed…

I called my contact at Weather Tech and they told me that is you have any step bars within 2 inches of the wheel well opening there is not fit for mud flaps. If you do have more than 2 inches from any step bars then the mud flaps that are designed to…

Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…

Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.