Folding Hard Tonneau Covers
Extang's hard, folding tonneau covers deliver ultimate truck bed style and security. Some feature self-contained clamps for rapid installation and removal. Others will lock with your vehicle's ignition key.
Folding Soft Tonneau Covers
Extang also offers soft, folding tonneau covers that feature built-in bows and self-contained clamps for rapid installation and removal. Available in both standard vinyl and premium canvas.
Roll Up Soft Tonneau Covers
Extang's soft, roll-up tonneau covers attach in a variety of different ways, from Velcro to snaps to uniquely designed tail rails. Most have spring-loaded, adjustable bows that let you create a perfect fit for any climate, and some roll up from either the cab or the tailgate.
Hatch Style Tonneau Covers
Extang's hatch style tonneau cover gives your vehicle a streamlined look and provides quick, easy bed access. Integrated gas struts make this hinged tonneau easy to raise. Cover can also be lifted off or rolled up and is climate adjustable for maximum performance year-round.
extang
Extang Reviews and Installation Videos
Expert Answers about Extang
- Recommended Locking Tonneau Cover For 2016 Toyota Tacoma With 5-Ft Truck Bed
- We do have an Extang Tonneau Cover that is lockable but the # EX83830 does not have a locking feature.
The tonneau cover I recommend is part # EX62830. This cover has a lock for the panel closest to the cab of your truck. It can remain locked to the truck even when the rear panels are folded toward the front. They are secured with buckles. When your tail gate is closed the # EX62830 cover cannot be opened
view full answer... - Does Extang Trifecta 2.0 Tonneau Cover Fit 2019 Honda Ridgeline
- Yes, the Extang Trifecta 2.0 # EX92590 that you referenced is a confirmed fit for your 2019 Honda Ridgeline.
The Extang Trifecta Soft Tonneau Cover # EX94450 installs using built-in clamps that grip the underside of your bed's side rails. Please refer to the linked photo. If you have a drop-in bed liner that comes all the way up and over the tops of your bed rails it will block access to the underside of the rails, but if not this cover will fit. Spray-in liners are not a problem.
view full answer... - Instructions for Replacing Extang Replacement Tail Clamp Assembly for Solid Fold/Solid Fold 2.0
- I can help you with the process of replacing the Tail Clamp Assembly # EX1035 for your Extang Solid Fold or Solid Fold 2.0 tonneau cover. The replacement process will be different depending on if your existing cover is the Solid Fold or the Solid Fold 2.0. I spoke with my contact at Extang to learn more about the different replacement processes. She also confirmed that they do not have a specific set of instructions on how to replace the tail clamps.
For the Solid Fold cover, you will...
view full answer... - Replacement Tarp and Latch Parts for Extang Tonneau Covers
- For your Extang Express Soft Tonneau Cover # EX50790 the replacement vinyl tarp portion to use is part # EX49790. I confirmed this with my contact at Extang. For the Extang Express cover # EX50795 the rear latch kit is part # EX1072 and the front latch kit is part # EX1071.
view full answer... - Comparing Vinyl To Canvas Tonneau Covers On Extang Trifecta 2.0 For 2015 Ram 2500 6 Foot Bed
- The Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas # EX94430 looks similar to the Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl # EX92430, but the canvas doesn't have the same sheen you mentioned. It has more of a matte finish in comparison to the shine of the vinyl. The canvas is a little more durable and the vinyl is slightly easier to clean.
Both covers are really nice custom-fit tonneau covers that rest on top of the bed rails and sits 1 to 1-1/2...
view full answer... - Replacement Tail Panel For Extang Solid Fold 2.0 Hard Tonneau Cover
- We do have the replacement panel you need for your Extang Solid Fold 2.0 Hard Tonneau Cover, part # EX83475.
The rear panel(closest to the tailgate) is part # EX83475-62. This is a replacement panel and comes with instructions on how to remove the old panel and install the new panel. This is a custom order so there is no returns allowed for this product.
view full answer... - How Does Rear Panel of Extang Solid Fold 2.0 Install/Remove
- I spoke with my contact at Extang and they send me a set of install instructions that cover the installation and removal of the rear section of the Extang Solid Fold 2.0 which I attached to this page.
view full answer... - Replacement Tail Hinge for Extang Solid Fold Tonneau Cover EX83475
- The hinge part of Tonneau cover # EX83475 does not come with panel # EX83475-62. It is a separate part, # EX83475-64. Replacing the panel and hinge is not difficult though it may be easier with the cover off of the truck.
view full answer... - Installation Of Replacement Rear Clamp Assembly For Extang Solid Fold Tonneau Cover
- I was not able to find the installation instructions for the Replacement Tail Clamp Assembly, part # EX1035, but I did find the instructions for the Extang Solid Fold Tonneau Cover part # EX83700.
I have attached those instructions and you can see where they address the installation of the rear clamps in step 7.
view full answer... - Would Extang Revolution Fit Truck with Spray in Bed Liner
- The clamps of the Extang Revolution part # EX54430 would fit just fine on a truck with a bed liner. I attached a picture that shows them attached to a truck with a spray in bed liner.
view full answer... - Solution for Changing Lock on Extang Encore Tonneau Cover to FIt New Truck
- In order to change the lock on your Extang EnCore Hard Tonneau Cover # EX62450 to match your new truck, you will just need to use the Replacement OEM BOLT Lock # EX28620172-28. This replacement lock is designed specifically for this model tonneau cover and will allow you to key it alike to your truck's ignition key. I have attached an image of the instructions for coding the lock.
Because the locks can only be coded one time, you cannot actually rekey the existing lock on your tonneau...
view full answer... - How Much Weight Can Be Supported by Extang Solid Fold 2.0 Tonneau Cover
- Neither of these Extang covers has an actual weight carrying capacity since that is not the cover's intended purpose. However, these are both strong enough that a person could briefly stand or sit on the closed cover. I confirmed this with my contact at Extang.
Extang offers two versions of a solid folding tonneau cover for your 2015 Chevrolet Silverado 2500 with 6-1/2-foot bed and without the cargo management system, their Solid Fold 2.0 Hard Tonneau Cover # EX83450 and their EnCore...
view full answer... - Replacement Tarp for Extang Trifecta on 2007 Ford F-350 Super Duty With Short Bed
- We have exactly what you need; based on the number you gave you have the Extang Trifecta 2.0 Soft Tonneau Cover # EX92720.
The correct replacement tarp is Replacement Tarp for Extang Trifecta Soft Tonneau Cover # EX43720B
view full answer... - Programming Lock On Extang EnCore Hard Tonneau Cover On 2015 Ford F-150
- When you are installing your Extang EnCore Hard Tonneau Cover, part # EX62475 on your 2015 F-150, you cannot use the retractable key to program the lock on the tonneau cover.
My contact at Extang told me that there will be a key referred to as the glove box key in your cab that can be used to program the lock. This is due to the way you program the lock on the tonneau cover. You have to be able to crank the key when programming the lock and the retractable key is not strong enough to...
view full answer... - Extang Trifecta 2.0 Tonneau Cover Recommendation for 2017 Toyota Tacoma 5 Foot Bed
- We have a Trifecta 2.0 cover that does fit your 2017 Toyota Tacoma with a 5 foot bed, but it's actually the part # EX92830 and not the part # EX92425.
view full answer... - How to Install a Tonneau Cover Over a Factory Plastic Bed Liner on a 2000 Toyota Tundra
- I spoke with my contact at Extang and they were able to offer some insight as to what would be required to use a tonneau cover with your bed liner. The only way to install a tonneau cover while you have a bed liner in place would involve a bit of cutting or trimming.
I recommend using the Extang Trifecta 2.0 Soft Tonneau Cover part # EX92840 as this is a tri-fold bed cover that is a confirmed fit for your 2000 Toyota Tundra. In order to fit this cover to your vehicle, you will need...
view full answer... - Replacement Tonneau Cover Tarp Availability
- The Extang FullTilt SL Soft Tonneau Cover # EX38940 that you referenced is designed as a replacement tarp for the part # EX38940 which fits 6-1/2 foot truck beds so it would not fit yours.
Without knowing what part number tonneau cover you are looking to replace the tarp of it's hard for me to say what the correct part number you would need is.
However, I did attach a link to the right that shows all of the replacement tarps we carry. If you select the part number cover you have from...
view full answer... - Will Extang EnCore Folding Hard Tonneau Cover # EX62475 Fit on F-150 with a Bed Liner
- The Extang EnCore Folding Hard Tonneau Cover # EX62475 for your 2015 Ford F-150 installs using frame rails that clamp on the inside of your truck bed side rails. If you have a drop-in plastic liner or a spray-in liner, both of which are compatible according to my contact at Extang, you'll just need to adjust the position of the side rail as noted in Step 1 of the linked instructions.
view full answer... - Troubleshooting Extang Trifecta Clamp that is Stuck After Unscrewing
- If the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it or it is some how binding up to the shaft of the threads.
You would want to gently pry on it to try and get it to release.
If it's damaged you would need the part # EX1034 to replace it.
view full answer... - Replacement Tarp Recommendation for Extang Trifecta Vinyl on 2008 Ford F-350 Long Bed
- For your 2008 Ford F-350 long bed with Extang Trifecta part # EX92725 the correct replacement tarp would be # EX92725-20.
view full answer... - How to Remove Cab Clamp Assembly for Replacement on Extang Trifecta Tonneau
- I spoke with my contact at Extang and he said that you need to disconnect the screws from the crossbow of the cover so that it will drop down and the cab clamp assembly will then be able to slide out of the rail.
view full answer... - Does Extang Solid Fold 2.0 Hard Tonneau Cover Leak
- The issue Brian had with the Extang Solid Fold 2.0 is not the norm for how this cover handles rain, water, etc. I searched on forums for experiences with this cover and found a few people that had leaks but those issues seem to be a couple years old like the age of Brian's review.
In Brian's situation we were able to help him out since the cover has a 3 year warranty so you'd be protected in the unlikely event yours were to leak. But again, I really don't think it will.
view full answer... - Replacement Tarp for Extang Tonneau on 2010 GMC Sierra with 6-1/2 Foot Bed
- I reached out to my contact at Extang and the # EX92635-20 you asked about is a cover for a Ford Ranger. We do have a Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl # EX92650 that is a fit for your 2010 GMC Sierra 6.5 foot bed, but this is a new cover that is only a couple of months old, so it would be odd for you to already have a replacement need. A cover for a 6-1/2 foot bed is just a few inches longer than that to fit the front rail and tail gate.
My guess is that you have...
view full answer... - Replacement Lock for Extang EnCore Hard Tonneau Cover EX62486 for 2017 Ford F-250
- The Extang EnCore hard tonneau cover that fits your 2017 Ford F-250 with 6-3/4-foot bed is part # EX62486. For a replacement code-able lock kit you can use # EX28620192-28. This will allow you to use your truck's ignition key to code and operate the lock.
view full answer... - Replacement Hinge for Extang Trifecta Tonneau Covers
- You would want the whole hinge assembly, # EX1033, especially if you have frequent breakage like you have described. There could be fatigue to the other components so to ensure maximum longevity I do recommend the whole hinge assembly.
It is possible that this is happening due to the 2 sides of the cover's rails being out of alignment. It would be a good idea to check to make sure the rails are aligned properly so as to minimize stress on the hinges and other components.
view full answer... - Will Extang MaxSeal Tailgate Seal Work with Spray-On Bed Liner
- The Extang MaxSeal Tailgate Seal # EX1140 referenced in your question is indeed compatible with spray-on bed liners and will work great. This seal will do a great job of keeping your truck bed dry, as it will create a tight seal between the tailgate and bed/side walls. It features a high-strength EPDM rubber construction that is resistant to damage from oil, gas, and UV rays. Simply measure the length you need, cut it, peel off the adhesive backing and stick it into place!
I have attached...
view full answer... - Replacement Rear Latch Assembly for Extang Revolution Tonneau Cover
- The # EX1072 fits the Extang Express but not the Revolution # EX54790 that you have. I contacted Extang and the correct part for your cover is # EX1091.
view full answer... - Will Extang EnCore Hard Tonneau Cover Fit with 5th Wheel Hitch Installed for 2016 Ford F-250
- The Extang EnCore Hard Tonneau Cover # EX62720 will work well to secure your truck bed while you are not towing. A quick measurement in your truck bed will let you know if the # EX62720 cover will work with your 5th wheel hitch.
As long as the 5th wheel hitch sits no higher than 20 inches above the truck bed, the # EX62720 hard tonneau cover will work well for you. The hitch height can vary from 5th wheel hitch to 5th wheel hitch and will depend on the settings of the hitch.
I have...
view full answer... - Troubleshooting Extang Trifecta Soft Tonneau Cover That Flops In the Wind
- I reached out to my contact at Extang and was told that air may be getting underneath the Extang Trifecta 2.0 Soft Tonneau Cover # EX92830. To fix this issue, drop the tailgate and look inside the bed to see if you can see light coming through in the front. If you see exposed light, Extang recommends using weather seal to seal off areas where light is exposed. With everything sealed up properly you should not have further issues.
Using a product like the Replacement Cab Seal for Extang...
view full answer... - Can Tears on Extang Trifecta 2.0 Part 44450 be Repaired
- Although there are no kits available to repair the cover on your Extang Trifecta 2.0 # EX92450, I spoke with my contact at Extang who said that a local vinyl shop (they make boat covers) should be able to patch up some tears.
If you don't have a vinyl shop near you or you would rather just replace the tarp then the correct replacement tarp is part # EX92450-20 on our site.
view full answer...
What our customers are saying:
I'm very impressed both with the product and the prompt delivery. Thank you
Penn
Turners Falls, MA