Discover SnapPad - Parts & Accessories for Your Journey

Hey Ken, yes the Replacement Pad for SnapPad Jack Stand Pad System #SP74FR that you referenced is made by Snappad. This is for sure not a knock off! What camper do you have?

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

Hi Uwe! Yes, the SnapPad StakPad Universal Leveling Block and Jack Pad #SN24VR can hold that weight. These have a capacity of 40,000 lbs, so as absurd as it may seem a single jack pad can handle the entire weight of your Class A. Using these under…

Hello again Stephen! What kind of jacks do you have on your Imagine? If it is the Lippert leveling system with 5-1/2" square feet you need the #SN68FR. If it is a 2-point instead of a 4-point system you can pick up two of the #SN73FR instead. If…

Hello Luc, thanks for reaching out. The SnapPad #SN44VR kit will not fit the HappiJac jacks used on a Lance 1172 truck camper. The #SN44VR is designed for Lippert PSX style trailer stabilizer jacks with 5-1/2 inch square feet, not the round corner…

Welcome back Linda and thanks for the pic! Unfortunately, the SnapPad SnapJack item #SN44VR are not going to work with your BAL Type C stabilizing jacks because the mounting tabs are too narrow. The SnapPad item #SN39FR are the only options to add…

Hello Jason, Thanks for writing in. For your 2026 Forest River R-Pod 192, you'll need the SnapPad SnapJack SJ RV Scissor Jack Pads #SN32FR for the four scissor stabilizer jacks and the SnapPad TJ Trailer Tongue Jack Pad #SN77VR for the rounded…

Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…

Hi Mark; more than likely the 5-1/2" will work but it won't be the #SN27FR. With your 5-3/4" measurement you probably need the #SN39FR for square feet. These also fit 5-3/4" round Reico Titan jack feet which are common on a lot of…

Thanks for the information Shane! To replace your VD0433 roof vents' interior trim, screen, and frame, you'll need the following parts: Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents item #BVC0573-31R…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…