Weight Capacity of SnapPad StakPad Universal Leveling Block and Jack Pad

Question

Question:

We are travelling in a class a weighing 32000 pounds. It has 3 jacks. 1 in the front and 2 in rear. Will these pads hold that weight?weight in front is ca 12000 pounds. The rest on back.

asked by: Uwe S

0

Expert Reply:

Hi Uwe! Yes, the SnapPad StakPad Universal Leveling Block and Jack Pad # SN24VR can hold that weight. These have a capacity of 40,000 lbs, so as absurd as it may seem a single jack pad can handle the entire weight of your Class A. Using these under your three jacks won't be an issue at all.

What kind of motorhome do you have?

expert reply by: Robin H

0

SnapPad StakPad
(click to enlarge)

Uwe S.

6/23/2026

Hi It is a 2002 Monaco Diplomat, no gas, electric only. 12kwh of batteries and heated by a diesel heater. We are living full-time in it.

Robin H.

6/23/2026

@UweS sounds like you've put together a setup that works well for full-time living. Safe travels!

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Thanks for reaching out TY, happy to help! I can see how the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR instructions would be confusing. The first illustration is intended to show the assembly steps, so it can make it look like the end…

view full answer...

Answer 6

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 7

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 8

Hi Uwe! Yes, the SnapPad StakPad Universal Leveling Block and Jack Pad #SN24VR can hold that weight. These have a capacity of 40,000 lbs, so as absurd as it may seem a single jack pad can handle the entire weight of your Class A. Using these under…

view full answer...

Answer 9

Hey Matt, so the biggest difference between the Hellwig and Roadmaster sway bars that fit your 2022 Ford F-350 is the diameter of them which is what directly influences how stiff they are. The Hellwigs are a smaller diameter than the Roadmaster so…

view full answer...

Answer 10

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 11

Hey Roland, sorry to hear about your SnapPads almost getting stolen. I wish there was a better way to lock them on so that people wouldn't be tempted to steal them. I will say we haven't heard a lot about these getting stolen so I don't…

view full answer...

Answer 12

Hey Monte! Yes you found the correct parts for your 2026 RV on the Ford F600 chassis. The part numbers you found are Roadmaster's part numbers, while we have different part numbers that correlate to them. Front 1139-220 = #RM77GT Rear 1139-221 =…

view full answer...

Weight Capacity of SnapPad StakPad Universal Leveling Block and Jack Pad

Product Page this Question was Asked From

Continue Researching