Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…
Hey Max. To attach the T-One Vehicle Wiring Harness item #118648 to your new Curt Hitch item #C13343, you'll need the No-Drill Mount Bracket item #18136 and the Mounting Bracket 4-Pole Flat item #18144. The No-Drill Mount Bracket item #18136 uses…
Hey Myron! With that 2-1/2" lift you will need the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift #AL52420. The spacers will install underneath the cradle on the #AL88FF. I also recommend adding an air…
According to BedSlide the Factory Mount Installation Kit for BedSlide S and Classic #BE69WR will not work with any in bed towing packages such as 5th wheel & gooseneck towing packages. This installation kit you mentioned is actually designed to…
Hey Sam! Yes, the BTBRV Magnetic Hitch Receiver Reducer Set #BTBRV39FR can be used for weight distribution. The reducer sleeves do not cause any kind of reduction in capacity so it is perfectly fine to use with your WDH shank. What kind of trailer…
Hey Steve, great question! The magnets on the BTBRV Magnetic Hitch Receiver Reducer Sleeve #BTBRV64FR are strong enough to keep this from happening. They will keep it secure in your 2-1/2" receiver so you don't have to worry about it sliding…
Hey Mark, there isn't a way to use a Bedslide with a gooseneck but I was able to find that there is a way to use a CargoGlide with one if you use the part #CGGN-1 which is something that has to be special ordered from them. At this time we…
Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…
I have a solution for you. The Extra-Long Loading Ramp for Thule EasyFold XT #TH933402 is only constructed to attach to the Thule EasyFold XT Bike Rack #TH903202. The Thule Easyfold XT has slots below the platforms that allow the connecting piece of…
For an e-bike with fenders we do have great bike rack options but the RockyMounts MonoRail Solo you mentioned would not be what you need as it is not compatible with bikes that have fenders. The best option is the Thule EasyFold part #TH903202 as it…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
The BedSlide Classic Sliding Truck Bed Tray - 1,000 lbs - 5" Rails - 65" Long x 48" Wide #BE63WR comes with the BedSlide Installation Kit for Aluminum Truck Beds #BE67WR which does require drilling into the bed of your 2020 Ford F-150.…
etrailer Experts Recommend BedSlideOur etrailer team can help you find the best BedSlide solution for your truck bed storage needs.With advice on compatibility and features, shopping for BedSlide is hassle-free.Rely on etrailer for support with BedSlide products.
BedSlide: Convenient Truck Bed Sliding Storage Solutions
BedSlide offers innovative sliding storage systems for easy access to truck bed cargo.
