blind spot detection - LED Indicators, Rear View Safety

Hey William, so the 3 inch hitches do use the larger hitch pin diameter but the 2-1/2 inch hitches still use the smaller one. So with a reducer like the part #38735 technically you would use both sizes. If you check out the picture I attached you can…

Hey Jason, thanks for reaching out. At this time Furrion does not offer an upgraded or extended-range antenna for the Vision S+ camera system #FR74AD. The only antenna available is the standard one that comes with the system, and there is not…

That's a ground strap that you have circled in your picture. You can basically run that to any metal bolt that touches the metal frame and you'd be fine, but if you were to use it on the same bolt it would have to go over the hitch flange and…

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

Yes, the Reese Electric 5th Wheel Landing Gear Set part #RP500708 is exactly what would be needed to upgrade from a single landing gear motor to a dual landing gear motor setup on a 2006 Keystone Raptor Toy Hauler. It would not require any…

That's a really great question, Dan. The kit that you were originally looking at, part #BM78YR, will not work if you have metal bumpers. Brandmotion does have an option for you though! You will want to get part #BM88YR instead. I double checked…

The Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers #CC-255 requires room for the tray and the upright supports. There are many different fit options as the upright supports can rotate for the precise fit. I've attached all the…

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

I went out to our warehouse and found that the Excalibur Trailer Wheel Center Cap #490EZ-SS that you referenced has an overall height of 4-3/8 inches. I measured an overall diameter, including the flange/lip, of right at 5-1/4 inches. I have attached…

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

The Replacement Center Cap for 16" Aluminum Viking Series Wheels #CXF105B will fit a 16" diameter, 8-lug wheel with a 4.9" pilot hole. It was just designed around the 16" Aluminum Viking Series Wheels like what comes with the…