Hey Dan, welcome back! I do indeed have a Black Armour mat designed for trailers. It's the Heavy-Duty Trailer Mat item #BA96AR. It measures 5' wide x 7' long and is made of 1/2" thick rubber. This is the only size and option I have…
Hey Rodney! Congrats on your new trailer! If you door weighs 250 lbs or less the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer item #CB250D96SHD will perfectly. You'll just need to trim the shaft down to fit your trailer's…
The Enclosed Trailer Ramp Heavy Duty Spring - Dual, 96" Wide #CB250D96SHD is rated for doors up to 250 lbs. I'm confident your ramp won't weigh more than that unless you've added weight to it beyond the decking.
I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…
Thank you for the pictures! We do not have an exact replacement but we have something extremely close. It is the LED Trailer Fender Light item #PE89BR. This light measures 3-7/8" long x 1-1/4" tall x 7/8" deep. It is a dual-face LED…
Hey Dan, thanks for reaching out! For your application you'll need the Triple Rocker Switch #37212245 and you'll need to swap out two of the SPST switches with the SPDT RV Switch #37213095 as we don't have any panels that come with the…
The RV Switch #37213095 doesn't have an option to add a faceplate, but we have an alternative with part #37212625 which comes with a small faceplate with it and carries the same on/on function that you're looking for.
It sounds like you have tested your truck with other trailers and your trailer with other trucks and have found the wiring circuits to connect and function correctly. This tends to suggest that there is just an issue between the two specific…
The reason that 10 Gauge #10-1-1 or 12 Gauge #12-1-1 wire is recommended for 10" brake assemblies, like part #AKEBRK-35-SA, is because they pull more power than the lights on your trailer. I believe the green wire you are referring to carries…
Your photo shows the 7-way trailer wiring setup that we call the RV format. The photo I linked shows an actual trailer plug #A10-7W6 like yours and the circuit arrangement is the same as your photo diagram. For reference, the included article covers…
Hardware is not included for the Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens Item #LPL55CB, but you can make a trip to the local hardware store and pick up some bolts and nuts to secure the license plate, light…
If you are wanting to go to higher capacity leaf springs I would advise against it. The problem is that since the trailer axle is rated for 3,500 pounds you won't gain any additional capacity by switching to higher capacity springs. What it will…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
Black Utility Mat for trailer floors
Protect your trailer floor with a black utility mat that stands up to snowmobile studs and ice ripper tracks while keeping plywood from getting chewed up. Install goes smoother if you lay it out warm to pull it tight, and it secures down well with screws for a clean, great-looking finish.
Install is straightforward when planned out. Unroll and let it relax in a warm space around 70 degrees to make it easier to pull tight. Dry-fit, then make initial cuts slightly oversized and trim to fit. If fastening to wood, screws have held nicely. The roll can be big and heavy, so have a clear workspace and a plan to handle it safely.
Yes, it can be cut to fit unique spaces. Make your first cuts a little oversized, then trim for a clean edge. If a single length won't cover a V-nose, plan for extra material and a seam. For horse trailers without an exact size, choose a larger piece and trim to the 3 ft x 8 ft area you need.
Yes, it makes getting down to work more comfortable than gravel, grass, or pavement and helps when the ground feels harder and colder. Use a size that gives you enough room to move. If long-term durability is a concern, check wear over time as some mats are newer in service.
Yes, black utility mats are used to protect plywood floors from snowmobile studs and can work with ice ripper tracks to help prevent further deck damage. Lay the mat out in a warm area around 70 degrees so it pulls tight. Secure it as needed—screws have held well in wood. Dry-fit first to confirm coverage before final attachment.
Filters
