Replacement Triple Switch Panel with SPST and SPDT Switches

Question

Question:

I am looking for a American Technology Components switch. part number si-asy-3-5-018 its a three rocker switch panel with one SPST, and two SPDT with one having ON-OFF-ON I can send a picture you have or can get something like that?

asked by: Dan P

0

Expert Reply:

Hey Dan, thanks for reaching out!

For your application you'll need the Triple Rocker Switch # 37212245 and you'll need to swap out two of the SPST switches with the SPDT RV Switch # 37213095 as we don't have any panels that come with the specific combination you're looking for.

expert reply by: Jon G

0

Dan

5/16/2024

The part number: 37213095 is a on-on and I need a on-off-on. I was able to locate the switch after talking to ATC. Thanks for your help and etrailer always being here to help

Reply

Jon G.

5/16/2024

@Dan Glad to hear you were able to find what you were looking for!

Reply

Answer 1

Yes! The RV Switch - On/On - SPDT #37213095 can be used to replace the switches from the Double Rocker Switch - On/Off #37212235 that you mention.

view full answer...

Answer 2

A 2-way switch is the same as an SPDT switch. SPDT switches use three terminals and it stands for single pole, double throw. To answer your question, the #37213095 RV Switch - On/On is an SPDT switch, so it may be used for a 2-way switch. I have…

view full answer...

Answer 3

Hey Richard. Like the name says, the Soft Start Kit for Coleman-Mach RV Air Conditioners item #CM56RR only helps on start up. The rest of the time your AC is running it will be pulling the standard amount of amps depending on what model you have. So…

view full answer...

Answer 4

Hey David, welcome back. To add a 4-way connector to your 2025 Kia Sportage PHEV, you'll want the Curt item #C99DR. It connects directly behind the rear tail lights and there isn't a way to connect it to a tow package. It will not control a…

view full answer...

Answer 5

Trailers use what is called a 2-wire system which means the turn signals and brake lights are on the same circuit. When you try to add separate amber turn signals you will need to separate out the brake light signal using a converter, #118158. On…

view full answer...

Answer 6

Hey, Brian. After some searching, I was able to find light part #328-003-6017A. Its amber and can be wired to do both turn and taillights. The white wire is ground, brown wire for taillights, yellow for your turn signal. This light is longer than the…

view full answer...

Answer 7

The RV Switch #37213095 doesn't have an option to add a faceplate, but we have an alternative with part #37212625 which comes with a small faceplate with it and carries the same on/on function that you're looking for.

view full answer...

Answer 8

We can get you a replacement for your TDE LP75 disc brake actuator; that's a 7,500 lb actuator that accepts a 2" hitch ball, and the correct option will depend on if your trailer tongue is 3" wide x 4" tall or 3" wide x…

view full answer...

Answer 9

Hi Tom; are you able to mount the #DM86VR G-Force controller further back or higher up where it won't interfere with the parking brake? If that won't work, you can mount it on the B-pillar (structural post between front and rear door) beside…

view full answer...

Answer 10

To do a diode style of tow bar lighting for your vehicle using the Roadmaster Invisibrake #RM-8700 you need is 4 diodes to follow the install diagram that you referenced which I also attached to this page. So you'd need a quantity of 2 of the…

view full answer...

Replacement Triple Switch Panel with SPST and SPDT Switches

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching