Headed to the water with kayaks or a small boat, Malone trailers make transport and launch straightforward. Assembly goes smoothly with clear instructions, and a low bed style helps with loading heavier craft and launching at ramps. Sturdy on long drives, they're a practical pick when you'd rather tow than lift gear onto a roof.
Yes. A second-tier load bar system can carry a rooftop-style cargo box; specific boxes have been confirmed compatible. Mounting a storage trunk inside the frame may limit room for two kayaks, so plan on using either the trunk or additional racks. Check bar spacing, box size, and tie-down clearance under the boats.
Yes, a dedicated LowBed conversion kit is typically all you need. Confirm your trailer's current setup and order the matching support tubes. If you also use a second-tier load bar system, verify it remains compatible after the conversion.
Match capacity to what you'll haul and your tow vehicle. Malone offers lighter options with a 400 lb capacity and heavier options with an 800 lb capacity. Heavier builds with 12" wheels can tow better than lighter options at highway speeds. If a light setup feels bouncy at freeway speeds, adding some load can help stabilize it.
Use a ball mount with the correct rise; a 2" rise was recommended for a low deck paired with a 16" hitch height. For higher speed ratings, 4.80R12 radial tires rated for 81 mph can replace the current tires and mount on the same wheels. If the trailer feels light and bouncy at freeway speeds, add some weight to help calm it down.
Yes, longer 78" crossbars are available and can fit if they share the same 1 1/4" bar dimensions. Kayak carriers designed for 1 1/4" bars will clamp on. For heavy kayaks, confirm the carrier's capacity and that your bar length gives enough spread and clearance.
Filters
