What Size Bunk Boards Come With The Malone MicroSport Off-Road Trailer MAL64ER?

Question

Question:

This trailer mentions set bunks,inch but it doesnt mention specifically how many bunks or what the length is. Is it two sets of bunks like what is shown in the picture, and are they the larger 7foot bunks?

asked by: Aaron

0

Expert Reply:

Hey Aaron, thanks for reaching out. The Malone MicroSport Off-Road 2 Kayak Trailer Package # MAL64ER comes with 84" (7 foot) bunk boards. You get a total of four bunks.

What boats are you hauling?

expert reply by: Jesse M

0

Malone MicroSport Off-Road 2 Kayak Trailer Package - 78" Load Bars - Set Bunks
(click to enlarge)

Aaron

8/3/2026

I'm looking into the Native Titan X Prop 12.5 and the Bonafide XTR 130.

Jesse M.

8/3/2026

@Aaron Oh nice! Those are real deal fishing kayaks. That Malone trailer will work great for carrying either of those. They are well within the length and weight limitations for the trailer. Whereabouts do you fish most often?

Aaron

8/4/2026

@JesseM I'm in the Indianapolis area, so I'll start with fishing the local reservoirs then expand out. There aren't any good bank fishing locations, and our HOA won't allow a boat trailer. I can at least hide a Malone trailer in my garage with the kayak(s).

Jesse M.

8/4/2026

@Aaron Awesome! Sounds like fun. I am in Missouri so we have lots of ponds, streams and lakes. Lake of the Ozarks is probably my favorite fishing spot though. I'll be heading down there in a few weeks actually. Anyway, good luck and stay safe out there! And don't worry I won't rat you out to your HOA lol

See All (4) Replies to Aaron ∨

Answer 1

The issue you described in your question is actually not too uncommon, especially on vehicles that have seen a few winters. I did verify that the M12 x 1.25 bolts are the correct size for installing the Curt Trailer Hitch #C11265 on your 2015 Toyota…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What Size Bunk Boards Come With The Malone MicroSport Off-Road Trailer MAL64ER?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching