Trailer Ramps - Stallion

Hi Dawin! With the etrailer Tandem Axle Teardrop Fenders w/ Backing Plates - 15" to 16" Wheels - Qty 2 #HP92VR measuring 72" long, the mid point would be 36", which therein means 18" of space from the absolute center of the…

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

Hey Joe! Don't worry, this is a pretty common question. When it comes to towing you are always limited by the lowest rated component. Trailer hithes are often capable of handling more than the vehicle they're designed for. Even though a hitch…

Hi Alex; the gauge on the Big Truck Big RV Tongue Weight Scale for Trailers #BTBRV004 has a +/- 5% full scale accuracy and displays weight in 20-lb increments up to 1,000 lbs. We also have it available with a SnapPad #BTBRV99FR. If you want something…

...The Stallion # 288-07503 loading ramps are manufactured in China. For a US made alternative, check out the Gen-Y Hitch Heavy Duty Aluminum ramp set which measure 72 x 14 inches which we offer as part...

We don't offer an 8500 lb rated surge coupler, but we might have options that would work for you. If the GVWR (weight of trailer plug boat) is 8000 lbs or less, I'd recommend the Demco item #DM8669113 if your trailer has disc brakes or item…

I do have an option for you but in order to switch an actuator from disc to drum brakes you'd need a new master cylinder. Unfortunately, we don't have any replacement parts for the Tie Down Engineering LP8500 as it's discontinued.…

Yes, you can use replacement LED module #47-84-420. It is designed to fit Bargman 84-86 series single, double, and triple tail lights like yours.

The entire hinge is 8-3/16 inches long by 1 inch in diameter. If you take a look at the photo I've edited for you, you can see all the dimensions of the Polar Steel Ramp Hinge, part #PLR1902.

We do have one RV roof vent that can be used with 120 volt power with the Ventline Roof Vent part #V2128SP-01. This would work great with the AC power you have currently there. We don't have any MaxxFans that can be used with this type of power…

We recommend having about 4" of clearance height-wise to account for suspension movement and at least 2" width-wise between your tire and trailer fender or trailer frame like part #HP66VR that was referenced. Since you are building a…

To replace the OEM ramp for your 2002 Triton Elite, I recommend the Loading Ramp Set - Steel - 48" Long x 11" Wide x 1-1/2" Thick - 1,600 lbs - Qty 2 #288-07474-2 or the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" - 6,000…