See what our Experts say about this Stallion ATV Ramps

• Which Aluminum Loading Ramps for Loading Harley Davidson TriGlide onto Trailer
  For getting your trike up onto a trailer, using the # 288-07452-2 along with the # 288-07452 ramps as you've proposed would be the best bet, and would be what I'd recommend. The combined capacity of the ramps would handle the weight of your TriGlide perfectly, as long as you can devise some way to tie the ramps together so they stay properly spaced.
  view full answer...
• Transporting Motorcycle and Camper with Short Bed Truck
  As both a camping and motorcycle enthusiast, I understand. I have a short bed F150 and 18' camper, non toy hauler. If loading your motorcycle in the back of truck is an option for you, I suggest the arched style loading ramps. This style is my personal preference, we have the arched loading ramp # 288-07452 and the set in Item # 288-07452-2. These are center fold design aluminum ramps 90" Long x 18" Wide. Since you do not have a long bed truck perhaps this would work with leaving...
  view full answer...
• Ramp that Can Help Get E-Bike into Truck Bed
  A motorcycle ramp like the part # 288-07452 would be a great option to help get the E-bike up into the truck bed so that you wouldn't have to lift the bike as high to get it onto the bike rack you have mounted to the crossbars.
  view full answer...
  
• How Can I Transport My 320 Sport Bike on My 2013 Hyundai Santa Fe?
  I have a way for you to safely transport your dual sport bike on your vehicle. I went ahead and looked up the specs for your 2013 Hyundai Santa Fe, and it has a maximum gross towing weight capacity of 2,800 pounds. If this is the case, the maximum tongue weight capacity of your vehicle is 280 pounds. With this tongue weight capacity, you cannot safely mount via a hitch carrier that requires tongue weight. This is because no matter what hitch you use, your sport bike exceeds that 280 tongue...
  view full answer...
• Single Motorcycle Ramp Recommendation for Motorcycle
  We have a ramp similar to the # 288-07501 sold individually that's actually intended for a bike. Check out the Arched Loading Ramp # 288-07452. The arches of the ramp make loading the bike a bit easier than a ramp that is totally straight. This ramp is 90 inches long. For a shorter 48 inch ramp we have the part # 288-07474 instead that is 11 inches wide.
  view full answer...
• Option For Ramp For Motorcycle Trailer
  There are a couple of options for single ramps you can use for your motorcycle trailer: - Arched Loading Ramp # 288-07452 - Erickson Arched Loading Ramp # EM07464 The # 288-07452 measures 88-9/16" long x 13" wide and has a 750 lb capacity while the # EM07464 is 80" long x 11" wide and has an 800 lb capacity. Both are center-folding, though the # 288-07452 is aluminum compared to the steel construction of the # EM07464 so it is lighter (17.3 lbs vs. 30 lbs) and a bit easier to handle,...
  view full answer...
• Availability of Loading Ram for Jeep Gladiator for Loading E-Bikes
  The Arched Loading Ramp part # 288-07452 would work great for loading your 60 lb e-bikes in your Jeep Gladiator. It does have a max height of 35 inches so your 25 inch height would be no problem for it. Also for something as light as your e-bikes compared to what this was designed to be able to support (750 lbs) there's a lot more height flexibility. This does fold down like you are wanting for easier transport as well. I like the S style ramps as well since they make loading a bit smoother...
  view full answer...
• Can Arched Loading Ramp # 288-07452 be Used for Loading into Truck Bed
  The Arched Loading Ramp # 288-07452 that you referenced can definitely be used for loading into a truck bed. Our review video only shows it used on a trailer but it was designed for a trailer or a truck so it would work well for your 2012 Toyota Tacoma. It is really lightweight too at 17 lbs for the set.
  view full answer...