How Tall Is Side Lip On etrailer RapidRamps

Question

Question:

How tall is the side lip on either side of the ramp?

asked by: Kevin H

0

Expert Reply:

Hey Kevin! The lip on either side of the etrailer RapidRamps # e47XV is approximately 1.875" tall. These 6' long ramps are designed for trailers over 6-1/2' wide and can hold up to 6,000 lbs per pair (3,000 lbs per ramp).

What will you be using the ramps for?

expert reply by: Robin H

0

etrailer RapidRamps
(click to enlarge)

Kevin H.

5/6/2026

Cub Cadet z series 60" zero turn. I have a problem with deck clearance.

Answer 1

Hey Richard, yes the Blue Ox Apollo part number BX7470P is the same as our part #BLU43QV. We change the part number just to organize it better in our system. This tow bar will also work with both base plate kits you mentioned part #BX1633 and…

view full answer...

Answer 2

Hey there Daniel - it really depends on your trailer height and what you’re loading. The 6' RapidRamps kits (part numbers #e47XV for 5–6-1/2' wide trailers and #e67XV for trailers over 6-1/2' wide) give you a gentler approach angle, which…

view full answer...

Answer 3

Hey Richard, yes the the BAK tonneau cover part #BAK85VR is for sure a fit for your 2000 Chevy Silverado 2500 long bed. Does your truck have the round or square front end? The Silverado generally has the rounder look whereas the C/K was more square.…

view full answer...

Answer 4

Hello Andrew, We have the Furrion Chill HE Replacement RV Air Conditioner Unit for Furrion Setup - 15,000 Btu - Black #FR86PR will work with your current set-up since it has the old R410a refrigerant. This year they came out with the new R32…

view full answer...

Answer 5

Hey Michael, so I have a solution for you but the Roadmaster Stowmaster tow bar part #RM-581 is not compatible with any adapters that will allow it to work with Blue Ox tow bars. So what you would need is the Trion tow bar part #BX7520P which has the…

view full answer...

Answer 6

Hello Fred. Yes, the Blue Ox Alladin Tow bar BX4325 will indeed work with the Blue Ox #BX2232 Base Plate. The Alladin tow bar is an older model that is no longer available, but Blue Ox still uses the same design for the clevis, so it will work with…

view full answer...

Answer 7

Yep, that flexibility is built right in, Chris. The ramps slide side-to-side along the index bars on all RapidRamps kits, whether you’re looking at the 5' options (#e37XV for 5 - 6-1/2' wide trailers or #e97XV for over 6-1/2' wide) or the…

view full answer...

Answer 8

Mark, that’s exactly the problem RapidRamps were designed to fix. And I understand the frustration as I currently use 3 foot long heavy angle-iron steel ramps on my Big Tex car hauler. I plan to upgrade to one of these kits. Once you install a…

view full answer...

Answer 9

Howdy Jason, for trailers over 6-1/2 feet wide, you’ll want either #e97XV 5 foot ramps or #e67XV 6 foot ramps. Both bolt directly to a wood trailer deck and include everything needed for installation. Between the two, ramp length is the deciding…

view full answer...

Answer 10

Hi Yogesh, thanks for sending over those measurements and photos, that really helps and I completely understand wanting to get rid of those heavy steel ramps and make loading quicker and smoother Based on your trailer being 6 feet inside to inside,…

view full answer...

Answer 11

Yes, they can, Chris. With both 6 foot RapidRamp kits #e47XV and #e67XV, the ramps slide side-to-side along the index bars so you can line them up with different tire widths. Once lifted back in the upright position, they latch in place, and you can…

view full answer...

Answer 12

That’s a great question, Angela - and you’re definitely not alone there. The easiest way is to measure the clear deck width at the very back of the trailer, where the ramps will mount, making sure there aren’t side rails or stake pockets in the way.…

view full answer...

How Tall Is Side Lip On etrailer RapidRamps

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching