Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…
Hey Todd, welcome back. If you don't want to install an e Track system then the SpeedStraps HD Through the Wheel Lasso Tie-Down Kit w/ Snap Hook item #SS29FJ would be a great option. These 2" straps have a 3,333 lb safe working load limit, a…
The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…
It would be a good idea to go with different holes for the reinstallation of the deck boards on your trailer, or at least enlarge the ones you have and then go with the next thicker screws so that you know you are getting a good grip on the metal…
The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to…
I reached out to Lets Go Aero for confirmation that you can even use the Demco 50-Degree A-Frame Coupler #DM15349-52 and they said that you will not have any structural issues with having the bolt holes drilled in the sides of your Frame as the Demco…
The service plan for the Galeo Pro part #GA94FR is offered in three time frames currently: Monthly/yearly/3-year service available from Galeo at $1.99/$19.99/$49.99.
The etrailer A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include…
You'd just have to physically go out to your trailer and measure the angle. So to do this, you'd need to get a protractor or something similar and place it on the edge of the inside on one side of the trailer frame, and check to see if the…
I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
I went and pulled a Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 from our warehouse to determine the weight capacities and found that on the sidewall it was stamped Load Range D with a 2,150 lb capacity at 65…
Filters
