Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…
Hey Gino, I totally get what you’re trying to do there. Having that 12 volt outlet way across the cab can make things feel messy fast, especially when you’re trying to keep a clean setup and good visibility. The Voyager WiSight 2.0 monitor part…
Hey Alex. From the information I can find online it does look like your 2011 Keystone Cougar 318SAB does come prepped for a second AC unit. The bedroom roof vent should be reinforced and pre-wired for a 13.5k or 15k BTU unit. To check if your trailer…
Hey Mike! The Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR is designed to work with 45000, 47000, and 48000 air conditioners. Based on those numbers I'm assuming you those are 38000 series, but the model number doesn't always…
Hey Art, I was able to confirm with Hollywood Racks, the Sport Rider #HLY87RR can be used on a class B van! Generally, racks that can fold like the Sport Rider won't be rated for towable RVs or travel trailers. The reason is that they have…
Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…
Hey Clay welcome back! The correct grease seal for your Dexter 5,100 lbs axle is item #DX72UR. This is a pair of seals that are sized specifically for your 5,100 lbs axles spindles. These are manufactured by Dexter and matches their OEM parts. If…
Hey Dave, congrats on the new truck and trailer. You're definitely going to want the extra clearance an offset gooseneck ball provides with a 6-3/4' bed. The Gen-Y gooseneck pin boxes do not help with turning clearance. For your 2026 Chevy…
They Thomas, I'd be glad to help you pick out which tire pressure monitor system would be better for you. So generally what we have found is that the TST system part #TST-507-RV-4-C is a bit more rugged and will withstand a little more abuse…
Hey Michael, thanks for the information. Capacity wise the Curt Helux item #C34HB is exactly what you need for your 2022 Keystone Montana High Country 331RL. As far as fit goes, I'll need some additional information to confirm. The Curt Helux 5th…
Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…
These arrived yesterday and are EXACTLY what I was looking for. Thanks for the excellent service!
Bill
Boxborough, MA
Charcoal RV Mattress for easy replacements
Swap in a charcoal RV mattress when you want something that just works and feels dependable. It's a great fit for refreshing a bunk or a toy hauler drop down bed, with quality that shows once it's in place. Angled-corner versions aren't available.
Yes, there is a Charcoal option in a 50" size for RV bunk use. Measure your bunk to confirm the 50" length and matching width. If your platform has corners that aren't square, note that angled corners aren't offered. Verify thickness and clearance for slide-ins or tight spaces before ordering.
No, angled corners aren't available. If your bunk or platform has an angled corner, measure the space and check for obstructions at that corner. Consider whether nearby walls, cabinets, or ladders need extra clearance with a square-corner mattress.
Expect it to work as intended with solid, reliable build quality. It has been used successfully as a replacement in RV setups, including bunk and drop-down applications. Still measure carefully and verify fit to minimize install issues.
Yes, it can replace a drop-down bed mattress when the size matches. Confirm the exact width and length of your platform. Check thickness and clearance so the bed folds and latches properly. Make sure any lift hardware or rails won't rub the mattress edges.
Filters
