Drop Shank Recommendation for Husky Weight Distribution for Ram Truck Towing Camper

Question

Question:

how to tow level?

asked by: Robert

0

Expert Reply:

Looks like you are in need of a drop shank for your weight distribution system to allow your trailer to be towed level.

The Equalizer Shank part # EQ90-02-4400 can do a drop of up to 9 inches so it would work well for you as it looks like you need right around 6.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hey Jordan thanks for the information! The 2" and 2-1/2" shanks for the Weigh Safe weight distribution systems are interchangeable amongst Weigh Safe systems. What I recommend doing is getting the Weigh Safe True Tow Weight Distribution…

view full answer...

Answer 2

Welcome back Larry! What you are looking for is the Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW #17120. This has the needed drop you are looking for, has plenty of tongue and towing weight capacity,…

view full answer...

Answer 3

You always want to check your weight ratings and how much your equipment weighs before going on a trip to make sure that you are within your weight capacities. Another thing to keep in mind is that your Tongue Weight (TW) should be between 10-15…

view full answer...

Answer 4

For your extra drop needed with your Fastway E2 weight distribution system, I recommend the Fastway e2 Weight Distribution Shank - 12" Long - 10-3/4" Rise, 5-1/2" Drop - 1,200 lbs TW #FA92-02-4214 this will give you a little under 4…

view full answer...

Answer 5

The Reese 54917 is a 6" drop shank with a 10 1/4" rise, the Equal-i-zer Weight Distribution Shank #EQ90-02-4400 has a 13" rise and a 9" drop and has an overall length of 12".

view full answer...

Answer 6

The heat shield part #RT76FR that you referenced was designed to prevent the type of damage you have on your Rock Tamers mud flap so this would be best solution. Other option is to have a turn down welded to your exhaust tip so that it is directed…

view full answer...

Answer 7

The correct Rock Tamer Mud Flaps for a 2020 Chevrolet Silverado 2500 is part #ERT00108 for 2" hitch receivers or part #ERT00110 for 2-1/2" hitch receivers. If you don't know what size trailer hitch receiver you have, just measure the…

view full answer...

Answer 8

Rock Tamers has a heat shield specifically for their mud flaps as the part #RT76FR which is the kit you'd want since this is the mud flap system you have. There's no reason the Access one you mentioned couldn't be used but the gap the…

view full answer...

Answer 9

For your 2007 GMC Sierra 2500 with in-bed hitch and 2" lift I recommend the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers #AL88275 along with the Air Lift Universal Air Spring Spacers #AL52420 to fill in the 2" gap.…

view full answer...

Answer 10

All you need is a lower shank so that your setup can be towed level. The part #EQ90-02-4400 will fit your Equalizer system and will allow you up to 9 inches of drop. That would be perfect since that's exactly what you said you need.

view full answer...

Answer 11

Comparing the height difference between your trailer and hitch receiver you're going to need a shank with about 9 inches of drop. The Equal-I-zer Shank #EQ90-02-4400 is going to be the only shank we have that will work for you. The Equal-I-zer…

view full answer...

Answer 12

When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into consideration: 1.…

view full answer...

Drop Shank Recommendation for Husky Weight Distribution for Ram Truck Towing Camper

Product Page this Question was Asked From

Continue Researching