Upgrade your setup with locks that fit and function right. Measure your door cutout and thickness first—some European style entries use a 7-7/16" x 3-3/4" opening with a minimum 1-1/2" door, while certain baggage slam latches fit 1-1/4" doors. Options include models with a deadbolt, keys alike convenience, or keyless units with up to 256 entry codes; when sizes match, installs are quick, though larger swaps may need small mods.
Most swaps go quickly, often around 5-10 minutes. Start the two screws where the latch and deadbolt pass through first to keep the handle square and level. If the new lock is larger than the old, fitting can be a bit tricky—check screen door clearance and be ready for small mods. Verify the striker style lines up before tightening everything down.
Yes—some RV entry locks are keyless and Bluetooth-enabled, and can be programmed with up to 256 entry codes. If you have a European style entry lock with a 7-7/16" x 3-3/4" cutout, keyless options for that specific style may be limited. Verify your cutout and style before shopping keyless so you don't end up with a mismatch.
Yes—some RV door locks and slam latches can be keyed alike for simplicity. Several replacements arrive with 2 keys. If you want all compartments and the entry to match, confirm keyed-alike options at purchase and match the key series where offered.
Match the door cutout and striker style first. European style entry locks use a 7-7/16" tall x 3-3/4" wide cutout and typically latch to a plunger inside the frame, with a minimum door thickness of 1-1/2". Standard RV handles use a strike plate and are a quicker swap if your door is already set up that way. If your door isn't cut for a plunger, choose a standard strike-plate style.
Remove the 4 screws and measure the opening to confirm fit. Check door thickness—some baggage door slam latches fit 1-1/4" doors, while certain European style entry locks call for a minimum 1-1/2" thickness. Note whether your door uses a standard strike plate or a plunger hidden in the frame, since the striker setup must match.
Filters
