Hi Guy, That's a great question, and thank you for providing so much detail. It really helps narrow things down. Based on your description, it sounds like you may have cruiser style or step through bikes with front baskets, and that combination…
Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Bring your bikes on RV adventures with racks approved for motorhomes and travel trailers. Pick frame-mount designs that work with step-through frames and keep fenders out of the way, or go with tire-strap setups to secure bikes with fenders. Verify your hitch receiver size—1.25 inch or 2 inch—and the per-bike weight rating so you're set for e-bikes and long miles.
Follow the assembly steps carefully and expect some adjustment time to position each bike. Use the rack's anti-rattle or threaded hitch bolt to help reduce play; if the included through bolt or lock seems light, consider upgrading. Tighten wheel straps or frame hooks firmly and recheck after a short test drive. Add reflectors if the folded rack is hard to see at night.
Yes—there are racks used on front hitches and on 1.25 inch receivers. Check folded clearance to your bumper or grille when the rack is up. Confirm the rack shank size matches your receiver and verify your vehicle's hitch rating. If clearance is tight when folded, plan to travel with the rack down when bikes aren't loaded if your setup allows, and recheck visibility and airflow.
Use a rack approved for RVs or travel trailers and check the per-bike weight rating. A reinforced shank and RV approval help with the extra forces at the back of a camper. Verify your tire size and wheelbase fit. Load heavier bikes closer to the vehicle when possible, but reconfigure if hook lengths or frame shapes require swapping positions. Test fit and retighten after a short drive.
Yes—choose a rack that secures bikes by the tires or by the frame, not by the top tube. Wheel-strap designs let you secure step-through bikes with fenders. Frame-mount hooks that clamp the frame also avoid fender interference. If your step-through sits very low, adjust the bracket height so it reaches securely. Do a test load to confirm strap or hook placement before your trip.
Flat-Towed Vehicle
Filters
