Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
Hi Sue, I don't recommend using the etrailer High-Low Adjustable Adapter part #e52ZV to lower your bike rack. Using an adapter decreases the tongue weight of your trailer hitch by up to 50%. The typical e bike can weight anywhere from 50-80lbs…
Thule RV and Camper Bike Racks for Confident Hauling
Thule RV and camper bike racks come in 2- and 4-bike setups for trips with the whole crew. Built sturdy for mounting behind a travel trailer or 5th wheel, they keep bikes secure, though the heavier builds can be a handful to move. Wheel-mount tray options accept tires up to 5 inch, but front fenders need over 1 inch clearance to secure the bike properly.
They can be when the rack is approved for trailer use and set up right. Choose a rack rated for the bounce and sway at the back of a trailer or 5th wheel. Keep straps straight and snug to avoid twisting that makes release difficult, and inspect them for wear. Confirm the tilt/lift latch is fully engaged before driving.
Yes, some Thule platform racks fit 2" receivers and carry 4 bikes. Check the per-position limits—positions 3 and 4 can be lower than the first two. Verify your hitch can handle the load; using all four spots can put a lot of stress on a hitch. Pick a rack rated for use behind a trailer or 5th wheel.
Expect them to be heavy and bulky, sometimes nearing triple digits in weight, so moving and installing can be a two-person job. Small built-in wheels roll better on pavement than rough ground. Assembly is straightforward, but printed instructions can be light—using a setup video makes it easier.
They can, but confirm a few details. Many trays accept up to 5" wide tires, yet front fenders need over 1" clearance at the tire for the front hold-down to work. Fat tires may need longer rear wheel straps than standard. Some models won't work with 14" tires, so verify the minimum wheel size.
Filters
