Hey Michael, yes a 7k Roadmaster Comfort Ride kit part #RM-2460-2570 would work on a 6k axle setup as they both have the same diameter axle of 3 inches. We do also have a 6k version with the part #RRM49NQ or are you wanting to increase the suspension…
Hey Wyatt, That ARC13AACWL2 unit you have looks like it uses the old R410a refrigerant. Unfortunately this past year all the RV Ac manufacturers switched to an R32 refrigerant which is no longer compatible with the old R410a. With that said we do not…
I have the perfect solution for you with the RockyMounts AfterParty Swing Away Bike Rack for 2 Bikes #RKY37ZR. This platform rack matches perfectly with what you're looking for, includes locks, and also uses a newer style upright arms that secure…
The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB. If…
Good morning Jay, I got that part added for you here Cummins Onan EC-AGS+ Auto Generator Start System - Bluetooth - Gas RVs #CM96MR. This will allow some select models (including your LP 5500) of Onan generators to be remote-started from an app based…
Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…
The part number you listed is a Coleman Mach AC unit so that means that the replacement shroud part #MA00-325001 would be the correct shroud replacement.
To replace your Lippert Turning Point with a Gen-Y gooseneck pin box you'll need to match the bolt pattern and pin weight of your 5th wheel trailer. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert Turning Point - 21K -…
Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…
As the Curt C17342 weight distribution system was discontinued at the end of 2016, there will be no more direct replacement parts available for it, unfortunately. However, The bars that fit the Curt replacement head #C17507 will be a 1-5/16"…
The Optronics LED Clearance or Side Marker Trailer Light is available in Red #MCL0030RBB and Amber #MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your…
Hey Tom, at this time Furrion does not have any alternate mounting methods or options for the monitors of their systems like the part #FR39DF that you referenced. If you have an idea for one that you can come up with like you mentioned that would…
Quick processing, and delivery. reasonably priced very satisfied
Bernie
Krakow, WI
RV Sewer Hose Fittings for Cleanout Adapters
Tackle odd hookups with cleanout adapters that bridge a 3 inch female screwed fitting to a 3 inch bayonet sewer fitting. Ideal when a portable tote tank has a threaded fitting but your sewer hose uses a bayonet connection, and you want to pair pieces together and secure them with ABS cement. A straightforward way to make mismatched connections work.
Yes, you can adapt a 3 inch female screwed tote fitting to a 3 inch bayonet sewer hose. Some setups won't have a single-piece adapter, so plan to join two fittings. Dry-fit first to confirm the non-threaded end nests into the socket opposite the bayonet lugs. Use ABS cement to make the joint permanent once aligned.
Sometimes you'll need to build the connection from two fittings. Look for a direct adapter first; if none matches your 3 inch female thread to bayonet need, use a compatible coupler and join with ABS cement. Ensure the spigot end fits the socket on the piece with bayonet lugs before gluing.
Pick a Cleanout Adapter configuration that places the bayonet where you need it. If you don't need the 3 lugs on one component, choose an option without them; if you do need a bayonet on the adapter side, choose a version that includes it. Verify it mates to a 3 inch female screwed fitting and test-fit before cementing.
Confirm your tote has a 3 inch female screwed fitting and your sewer hose uses a bayonet connection. Count the bayonet lugs (3) so the adapter interface matches. Test-fit the non-threaded spigot into the mating end; if it doesn't seat fully, recheck sizes. When everything lines up, bond with ABS cement.
Filters
