bing tracking image

RV Levels - Graduated Levels, Manual Levels

Filters
2






What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN


RV Levels with graduated, manual readings

Reading from the driver's seat gets easier with graduated levels that show how much correction you need front-to-back or side-to-side. Manual levels keep setup simple with no wiring, and you can mount with screws or adhesive depending on your surface. Choose a size you can see at a glance; some read in inches while others read in degrees.
Plan on drilling and use a sturdy bracket made for the pin box. Level the camper first so your reference is true. Pin box steel can be tough, so confirm the drill bit size and take your time. Mount it where you can see it in your mirror to reduce hopping in and out of the cab.
Not if the level is sealed. Some units are totally sealed with no way to add or remove fluid. If you suspect a problem, check the design notes; a sealed vial won't take fluid. If the indication seems off, verify the mounting is level or use an adjustable mount to fine-tune.
Yes, adhesive mounting is possible. Double-sided foam tape or Velcro have been used; a solid backing helps adhesives grip. If avoiding holes, expect most stick-on graduated options to be smaller. If you do screw-mount, seal the holes to keep water out. Check that your siding is flat; lapped aluminum or angled panels can make mounting tricky.
Both exist. Some graduated levels mark inches from level, while others mark degrees. Pick the scale you prefer for how you level. If you want to know how much height to add under a wheel, look for inch markings. If you prefer angle reference, choose degrees.