Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Hey Craig! Is this a Lippert Ground Control system? Is the part actually 304136? I asked Lippert and they said they don't have anything under 304135. If it is the 304136 the correct replacement is the Replacement Control Module for Lippert Ground…
Hey Jerry, does the LED still light up on the front of the Mighty Cord SurgeMinder Surge Protector and Circuit Tester #SU39SR? If it was actually overloaded it would have damaged the internals of it and it wouldn't work as a surge protector any…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Steve, yes the Dexter Nev-R-Adjust Brake Assembly set part #23-458-459 is the correct set for your Airstream based on the part numbers you mentioned. Also the hub/drum part #8-388-80UC3 that you referenced as well would be correct for your…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA
RV Interior Lights — dome light with touch sensor
Fingertip control at the fixture makes the touch sensor a handy upgrade for everyday use. The dome light design suits general cabin lighting and blends in well overhead. For replacements, match your mounting pattern and power source; Trailers and Motorhomes almost always use 12V. If you use a wall switch, a touch sensor can let you control a single light right at the fixture.
Yes, they put out a lot of bright light for such a small unit. Placement under cabinets or over counters works well for task lighting. If two lights feel too bright together, turn one off by just touching it. For the look you want, check lens color and trim style before you mount them flush to the ceiling or cabinet.
Yes, a touch sensor dome light can be wired to a wall switch and still let you control each light by touch. Wire it to your existing 12V interior light circuit. If running multiple lights, you can use the switch for overall on/off and touch a single light to turn it off when the combined light is too much. Test both the switch and touch function before final mounting.
They can work perfectly, but some may randomly turn themselves off or need multiple touches to operate. After wiring, test touch response before final mounting. If touches seem inconsistent, try a different touch point on the trim and confirm solid power and ground connections. Keep in mind touch controls can be sensitive to how you tap them.
Installation is generally quick and easy using original wiring, and a flush ceiling mount is common. Reuse existing mounting screws if they match, but measure hole centers first to confirm spacing. If your old fixture was 120 volt, switch to a 12V interior light setup or verify your power source before you start.
Filters
