bing tracking image

Review of Optronics RV Lighting - Interior Light - RVILL50

content loading

Customers compare RVILL50 to these similar products




Products Featured in this Video



Optronics RV Lighting - Interior Light - RVILL50 Review


Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this surface-mount LED RV dome light with the clear lens in the switch, and a 720 lumen light output. Now, this dome light will function as an interior ceiling light for your RV, and it'll also work great under cabinets. Does offer a three-way switch here to control brightness and power function. Has a high setting, a low setting, and then an off setting. Now at the end of this video, I am going to hook this up to some power to show you how bright the light is, and then show you the different settings.

Does use an SMD construction of the LED circuit board, that will better withstand shock and vibration, and allows improved heat distribution and thinner construction. Now this does use 30 LEDs, which makes great replacements for incandescent lights. The LEDs will last 50 times longer, they're more efficient because they'll provide brighter light with less power output. And, of course, no bulbs to replace or brittle filaments to break, and they do give you a lifetime warranty on the LEDs. It is a clear translucent lens that will diffuse the light and hide the diodes.

It is a durable plastic housing and lens. It is compatible with 12 volt DC systems. And this is designed to mount on the surface of the ceiling. It does have the mounting holes right here. Basically, this light will lay flat against the surface and only require a small hole for the wiring to fit through.

Now, the mounting hardware is used to secure the light to the trailer. Now, the mounting hardware is not included, you would have to supply that. It is a two wire design, includes a power wire and a ground wire. Few specs on this, the light output. The effective lumen rating is 720 lumens, the raw lumen rating is 870 lumens.

Going to give you the measurements of it, and then we're going to hook it up to some power. So, if we do the overall length, one end to the other is 15 and 3/4". The width on it is going to be right at 3 and 5/16" wide. And the overall height of it is only going to be about 1 and 3/16" tall. So what we're going to do now, is go ahead and hook up our power and our ground. And once those are all hooked up, I'll go ahead and turn on our 12 volt pilot. And then you can see, with the switch in the middle position like it is now, it is off. And if I push the top one, there's a one line and then two lines. So the one line will be the lower setting. So you can see when I push that. There you go. I'll go ahead and turn off the overhead lights. And then you can see, I'll go ahead and push the bottom one. First we'll go to off again, and then you'll see the bottom one is a lot brighter. Again, I'll go back to the. The less brighter one. So you can see it gives you a very large area. What I'm actually even going to do, is zoom out and give you a better idea. The lighted area will give off, and then I'll go ahead and turn back on our overhead lights, and go ahead and turn back off our power. But that should do it for the review on this surface-mount LED RV dome light with the clear lens and switch..


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Bradley B
Installed by:
Bradley B
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.