From quick swaps to fresh installs, these make upgrades simple. Built for 12V circuits, each led light delivers bright, clean illumination and works well as replacements in puck, strip, or reading spots. Options often install easily, match existing cutouts or tracks, and some are dimmable so you can dial in the glow.
Some 12V LED lights are dimmable and some are not. Check that dimming is listed and use a compatible RV dimmer. Test one light first to confirm smooth dimming. If it isn't listed as dimmable, run it on an on/off circuit to help prevent flicker.
Match the light to your opening and screw pattern. Measure overall diameter, cutout size/depth, and mounting hole spacing. If there's a trim ring, remove it carefully since some can be tight and prone to cracking. Choose warm white or a brighter clean light output to suit the space, like reading areas or kitchens.
Confirm you have 12V power and correct polarity. For adhesive-backed strips, clean the surface so the tape sticks; for awning uses, verify it fits the existing track. Cut to length where allowed and weather-proof the cut end if exposed. When retrofitting fluorescent fixtures, plan the layout since some instructions can be small and hard to read.
Yes, if the sizes and wiring match. Remove the old light and measure overall diameter, cutout, and mounting hole spacing. Match 12V wiring (black to power, white to ground). For awning or track strips, confirm the new LED strip fits the old track. If holes don't line up or a frame isn't symmetrical, adjust the mounting to square it up.
Ceiling Light Fixture
Courtesy Light
Dome Light
Pendant Light
Puck Light
Reading Light
Step Light
Strip Light
Utility Light
Wall Light
RV Interior Lights Parts or Accessories
Filters
