Hey Bob. There's two possible locations for the brake controller port on your 2026 Ford F-150. The most likely one is on your dash behind the coin holder above the 4WD knob. It'll be connected to the back of the coin tray which is only…
Hey Jason! For your 2026 Ford F-450 I recommend the Redarc Tow-Pro Liberty Brake Controller #RED67CR. This comes with a custom wiring harness that will plug into the factory brake controller port under the dash. The Liberty is simple, reliable, and…
Hello Kenneth, Thanks for writing in. I don’t have a database that shows exactly what was installed in every camper, but based on my research, your 2020 Transcend Xplor 243BH most commonly came with a 6-gallon Dometic (Atwood-style) water heater.…
Welcome back Rod. To add a hitch to your 2023 Ram Promaster 3500 EXT, I recommend the Curt item #C13295. This custom fit class III hitch has a 2" receiver with a 5,000 lbs towing capacity and a maximum tongue weight of 500 lbs. It comes with all…
Hello Henry, thanks for reaching out. The Replacement Auto-Programmable Controller Panel #LC26TF is the correct replacement for your current Lippert part 366701. We have confirmed this directly with the folks at Lippert.
One of the 3/8 inch ports is open on the Valterra RV Water Tank #R8030 and is plugged by the red cap like you see in the accompanying photo; this is where the tank would be filled. You would not want to modify the opening to fill up the tank, instead…
There are only a handful of brake assemblies that have the provisions to add a parking brake and #AKEBRK-35 or #AKEBRK-35-SA do not have that feature. Dexter electric brake assembly kit #K23-086-087-00 does have the ability to add a parking brake…
Because the Valterra RV Water Tank #R8048 is a lightweight tank that is baffled for surge control, it is not designed for use with electric water pumps. It would void the warranty if used this way and is why they specifically note on their site:…
I would agree that is a lot of money for a battery box to carry two Group 27 batteries. For something more affordable we have the NOCO part #329-HM408, and the part #329-HM484 which are a little bigger than needed but would still work great.
Hello Dale, thanks for reaching out. We do carry Solera awnings which can be used to replace Dometic awnings. I was not able to find any reference for the part number you provided, but it appears to be a 16' awning, correct? If so, we can provide…
Hi Elliott; the Valterra RV Water Tank #R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture, one has a red plug. The tank is only designed to be gravity fed or used with a hand pump, not an…
These 31-40 inch long RV fresh water tanks are perfect for maximizing space in smaller trailers. Their compact design allows for flexible layout options, making them ideal for enthusiasts who need to balance storage and living space.
The 31-40 inch length is ideal for smaller RVs or converted trailers where space is at a premium. This size allows for efficient use of space, providing ample water storage without compromising on living or cargo areas. It's perfect for those who need flexibility in their layout.
When installing these tanks, it's crucial to measure accurately and plan the layout to ensure the tank fits well within the available space. Modifications like adding sensors or cleaning ports should be done carefully to maintain the tank's integrity and orientation options.
These tanks are built with a solid interior spine for stability, ensuring durability over years of use. They are designed to withstand the rigors of travel and provide reliable water storage, making them a dependable choice for long-term RV enthusiasts.
While the tanks can be modified, such as adding a water gauge sensor or cleaning port, it's important to do so with precision to avoid limiting orientation options. Customizations should be carefully planned and executed to maintain the tank's functionality and versatility.
Regular cleaning and inspection are key to maintaining these tanks. Adding a screw-out deck plate can facilitate cleaning, but ensure any modifications are done carefully. Routine checks for leaks or damage will help ensure the tank remains in good condition for years.