bing tracking image

RV Covers - Storage Covers, Class A RV Cover

Filters
3









What our customers are saying:
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC


RV Covers for Class A — storage cover

Put your coach to bed with storage covers built for a class a rv cover. Pick sizing by overall length, and include mirrors and ladders to avoid a loose fit or short sides. Secure strap systems help keep fabric from flapping in windy lots, and adding padding at sharp edges can reduce wear during winter storage.
Pick a Storage Cover by overall coach length, including ladder and sideview mirrors. Some found length a bit loose, but straps tightened it up. Measure height from the roof (include A/C units) to the bottom of the cab; covers are not meant to reach the ground. If you've seen a cover come up short on the sides, compare your measurement to the listed cover height before ordering.
Include sideview mirrors in your length; that helped ensure a better fit, and wide mirrors still allowed the windshield to be covered. Check height carefully—covers are designed from roof to bottom of the cab, not to the ground—and some have found the sides short if the coach is taller. Measure your roof gear and compare to the listed cover height.
Installation is generally straightforward with two people. Ladders and brooms help guide the fabric, and tie-downs are easy to place. Watching an installation video can make unfolding and orientation simpler. Go easy on new straps—yanking hard has torn fabric—so cinch gradually and work your way around the coach.
It can, when secured properly. Covers have withstood very high winds and lots of snow, and tie/clip systems held well in the wind. Pad sharp areas like awnings, slide covers, and roof edges to reduce tears. Tighten straps to minimize flapping, and check for rubbing points after storms so you can add protection where needed.