Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…
I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…
Hey Wayne! Our etrailer Sidewind Aluminum Trailer Jack w/ Wheel #e95YV would be a great option for your Karavan Classic trailer. I found online that the 17 ft 1997 Boston Whaler Montauk comes in at around 950 lbs, so the #e95YV's 1,500 lbs…
I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
We currently will not have a kit that contains everything that you are looking for but we do have all the parts you will need. First I recommend upgrading your equalizers to the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR. These…
Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…
The correct Draw-Tite Trailer Hitch for your 2013 Porsche Cayenne is the Draw-Tite #75950 and is a great cost effective option that fits nearly the same as the Curt Trailer Hitch #C13116 you mentioned. Between these two hitches I would go with…
Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…
Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…
Hey Jerry! The TorkLift Tie-Downs like the #TL83DR you were looking at are a custom fit so you won't have to drill into your frame. These are the Talon, which is the upgraded aluminum version, and will fit your Ram assuming you have no running…
I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…
Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…
Running a channel-style setup? These hitch steps with ball mount attachment slide into the channel to give you steady footing at the tailgate. Match your hardware first: they fit a 3" channel with holes 1" apart, and won't work if your hole spacing differs or on slim adjustable designs. If your mount wraps around the outside of the ball platform, this inside-channel style isn't the right fit.
Usually no. Ball Mount Attachment steps are designed to fit inside a channel, not around the outside of a ball mount. If your hitch clamps the ball platform on the outside, look for a step made for that style or switch to a compatible channel-style ball mount.
Stability depends on fit and setup. Some report wobble or sag if there's play in the channel or pins. Check for tight pin fit and correct hole alignment. If the platform isn't level, adjust the position. Inspect pin length and clips; short pins or damaged clips can allow movement. Step carefully if the surface feels slick.
Plan for some adjustment time. Verify your channel's width and hole spacing first. Make sure the step's pins are long enough and that clips are intact. If a clamshell 2-5/16" converter is part of your setup, confirm it feels secure before use. After mounting, test for movement and re-seat pins to reduce play.
Yes, if the channel width and hole spacing match the step. Some steps are built for a 3"-wide channel with holes 1" apart, so measure yours to confirm. These steps fit inside the channel; outside-mount hitches use a different style. Shock-absorbing or slim adjustable designs can have different patterns, so verify before ordering.
Filters
Hitch Step Parts or Accessories
