1. RV & Camper
2. Gas Struts
3. Universalx
4. 10 Inch Longx

I may have a solution for you, but from what I was able to find in my research, the Springlift SL-33-70 was made by Attwood and has been discontinued. It looks like this spring has a 15" extended length and 9.25" compressed…

Hey Eric, thanks for reaching out! Yes, a license plate with mounting holes 5-3/4" apart will work with the Optronics LED Trailer License Plate Light with Bracket #LPL56CB just fine.

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

The Air Lift LoadLifter 5000 #AL88200 will work with the Air Lift Air Helper Spring Cradle #AL59DQ on your 2013 Ford F-150. The cradle actually replaces the lower roll plate so the air bag will sit directly in the cradle. I'm not sure…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

You will need to select the correct strut based on the weight rating for your current struts. These struts are 36" long from center of socket to center of socket and have the 13mm sockets which are the same as your 1/2".…

Yes we have just the thing. For your 2013 Toyota Sienna XLE I recommend the Firestone Coil Rite Air Helper Springs #F4155. This is an air spring that inserts inside the rear coil spring. You can inflate the air spring up to 35 PSI to help beef up…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round…

Hey Tom, I checked the ML34-60 strut you have now and the dimensions are exact same as the part #372-2300-100 so it will fit and it has an additional 40 lbs of force so it will work great.

We do sell replacement hardware for all of the trailer hitches we offer including the Curt #C13201 with the part #RHK.

The Gas Shock #372-7901 you were looking at would attach to a 10mm ball stud, but I have no way of knowing if the shock in your photo would connect to 10mm ball without physically testing it.

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…