2012 Chevrolet Silverado Vehicle Brakes

Hey Jake! With the amount of towing you're doing, the Timbren BES brakes are a great upgrade for your Ram 3500. If you don't have the high-output transmission, you can either upgrade the front and rear pads while keeping your factory rotors,…

Hey Steve, thanks for the pictures! I was able to use the S/N to identify the pin box, which is in fact the Rhino Box. I would choose the B&W Gooseneck Pin Box #BW23RV over the Shocker Hitch #SHK99YR for your 2026 Alliance Avenue 25RL. B&W…

Hey Kevin, yes we have the SumoSprings kit part #SS46KJ that is a fit for your 2025 Chevrolet Silverado 2500 HD. This is the medium density foam spring provides 2,800-lb support capacity at 50% compression and also requires no drilling for install!…

Hi Eric! I recommend installing the Timbren Rear SES #TFR1504E before the dealer sets up your weight distribution hitch. With the trailer hooked up, the Timbren SES will help limit rear squat, so you want them installed first to make sure the WDH is…

That’s a great truck for a fifth wheel Albert. For your 2024 Silverado 2500 HD LT, I’d recommend the SumoSprings Rebel rear kit part #SSR-203-40-2. They are rated around 3,000 lbs at 50% compression and designed to handle the kind of pin weight…

Hey Kim since we know your 2021 Keystone Montana 3763BP has a Lippert 1116 pin box the correct Shocker Hitch fifth wheel to gooseneck adapter would be the part #SHK55MR. Thanks for finding that info for us (see below) so we could figure out the…

Hey Justin! Based on the pin weight and GVWR of your 2020 Vanleigh Beacon 34RLB you will want to get the 4.5k TW model. There are two different models depending on your bolt pattern. If you have a Lippert 1621, 1621HD, 0719, or Fabex PB 600 Series…

Hey Ryan! Since you're regularly towing a heavy equipment trailer, upgrading the brakes will be a nice addition along with the air bags you already installed. You have two good options for your 2026 Silverado 2500 depending on how far you want to…

Hey Jerry, we do not have any pintle options for the Trailer Valet Adjustable Ball Mounts like the part #TV26FR. I'd go with the adjustable pintle hook mount part #63072 and then mount the mount the hook/ball part #C48200 to the adjustable…

Hey Art, the adjustment pins of the Trailer Valet Adjustable Ball Mount part #TV26FR are 5/8 inch diameter like standard hitch pins so you could use the part #C23519 as a locking hitch pin for it.

Hey Charles. I didn't receive any pictures but they make those Rhino Boxes pretty easy to identify when they slap that giant label on the side pin box. If you would like to email me the pics directly you can send them to the email address you…

Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…