2012 Ford Escape BOLT brand vehicle and hitch locks

Hello Tyler, thanks for reaching out. We may have what you need, but I will need more information in order to know what locks will work. Does your ARE cap use the Bolt brand locks that key to your ignition key? If so, the Replacement Lock Cylinder…

Thanks for reaching out, Hal! That's a really good question. Based off what I could find, if the old cylinder worked with your ignition key you would want to get part #BL692918. I included the ignition key compatibility diagram below for you. You…

Hey Jeff, thanks for reaching out. I just went out to our warehouse and measured the P&F Products J-Channel Rail for Enclosed Trailers #PF26FR. The interior dimension of the J-channel I measured at 0.17". What thickness plexiglass were you…

Hey Jonathan, We do have a kit from Infinite Rule for locking pins specifically for that B&W Tow And Stow With Pintle #IR52FR. This comes with the specific locks needed for that pintle hook you have and will have all points lockable. What are you…

Hey there Daniel - it really depends on your trailer height and what you’re loading. The 6' RapidRamps kits (part numbers #e47XV for 5–6-1/2' wide trailers and #e67XV for trailers over 6-1/2' wide) give you a gentler approach angle, which…

Hi Mark; B&W does not have a 3" version of the Tow & Stow Pintle Hook at this time. What you can do is use the #BW77BR for a 2-1/2" hitch along with the BTBRV Magnetic Hitch Receiver Reducer Sleeve #BTBRV74FR. The reducer sleeve…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

They sure do Mike! Our etrailer Invisible Base Plate Kit item #e56GV is going to attach directly to the frame of your 2023 Ford Bronco so long as you have the Ford Performance Heavy Duty Modular Bumper or standard plastic bumper. The baseplate will…

Hey Mark, yes the etrailer base plate kit part #e56GV does fit your 2025 Ford Bronco Raptor. Do you have the rest of your flat towing setup picked out already?

Hey Luke! It may be possible to replace your Dometic 300 series with the Seaflo Ceramic RV Toilet w/ Sprayer Attachment #SE42MR but you will need to measure to be sure. This toilet requires a rough-in measurement of 10" for installation. This is…

Hey Joe, I attached a picture below that shows the full instructions I got for the Blue Ox wiring kit part #BX88285 that you referenced. Let me know if you think you could pull off the install.

Yep, that flexibility is built right in, Chris. The ramps slide side-to-side along the index bars on all RapidRamps kits, whether you’re looking at the 5' options (#e37XV for 5 - 6-1/2' wide trailers or #e97XV for over 6-1/2' wide) or the…