# 1
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 2
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 3
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
I wish I would have bought one of these years ago. It would have saved me from buying 4 different height hitch receivers. I have a boat trailer that requires me to mount this hitch upside down to get about 2.5in of rise. On the flip side is my utility trailer that requires a 2 inch drop. The kicker is that when I load the truck down with gear and people or load the utility trailer up really heavy, this hitch allows me to kick the ball up or down a notch to keep the trailer level. Also if you ever rent heavy equipment most of the trailers they use will have 2 5/16 ball, so I just flip the ball and I'm in business. Build quality and finish is excellent. I don't keep the mount on all year long but with some judicious use of grease this thing hasn't shown any rust over the past year of use. I am currently using this on a stock GMC Sierra 1500 and I really could have gone with one size down on the hitch drop/rise, but I figured if I ever bought a 3/4 ton truck or a friend with one ever needed to borrow the hitch it would have enough drop to work with that application as well. As it stands the 5in drop isn't too long to cause clearance issues with a half ton GM truck. For those of you who are wondering about thieves making off with the ball mount - the design of the tow and stow is such that with all the pins removed and the hitch installed on the vehicle, it is not possible to rotate the ball mount off the receiver. Especially if you mount the receiver using the inner most mounting hole. All that is needed is a locking hitch pin and the whole setup is secure. I've attached a picture of the hitch installed on a 2015 GMC Sierra 1500 4x4 for reference.
# 4
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.
# 5
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.
# 6
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Better than the big box stores with a welded support underneath, and best price anywhere.
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 8
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
All of the items arrived on time and not damaged in any way. Excellent quality products.
Parts came fast and they worked great took the band out of the trailer. Thanks for fast service.
# 9
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 10
Flash Silent 2-Ball Mount w/ Stainless Balls - 2" Hitch - 6" Drop, 7" Rise
Less than half the weight of similar steel products and just as strong. The anti-rattle feature is awesome, works great. The optional locking pin needed a 1/16" rubber washer to keep it from rattling. Overal VERY pleased! Highly recommended!
First of all, it’s beautiful; fit and finish is as it should be for the price. No rust stainless hitch ball ends are great. I use this on a Chevy Silverado 1500 with the max tow package pulling a 24’ 5800 lb. boat on an aluminum trailer. It pretty much is one position so I can’t say how quick and easy it is to routinely change from one ball size to the other or hitch height, but I can tell you that it all works flawlessly. The only downside is that it’s heavy so storing it in a foldaway tool box in my truck bed is fine but it’s a load. In use it never rattles or shakes and it’s because of the clamping lock. But that can only be used in dropped position, which is how I use it. If you need a great multi ball unit that looks and works really well, this one is for you.
# 11
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 10" Drop, 10" Rise - 18K
Looks fantastic! Easy to adjust. Works like it should. I would recommend this product. Only negative would be that I cannot lower my tailgate with this ball mount as it is tighter to the truck than most. I drive a 2018 Ram 3500
This hitch was much lighter than my last hitch. Height is easily adjusted.
# 12
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 13
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 10" Drop, 11" Rise
This is a great product, well built and matches my chrome bumper. My truck is lowered so I needed a sturdy product with a good rise to compensate. This hitch, along with the Roadmaster Quiet Hitch from etrailer and the Fastway Trailer Hitch locks work together nicely.
Looks good and functions even better. I have the hitch fully adjusted and never had an issue. Gotten a ton of compliments! Would highly recommend!
# 14
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 15
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 4" Drop or Rise
Just took delivery of the Anderson 4" drop adjustable. Seems very nice and decent quality. Service by e-trailer was prompt once again. Will need to put the hitch to use before giving a complete review but impressed out of the box for now. Same with the locking pins.
Just received my order yesterday. As stated in prior reviews, the ordering was simple, I received a confirmation of my order within minutes (on a Sunday!), a follow up email was sent the next day confirming shipment with an expected delivery date and a link to track the progress of my shipment, it arrived on Thursday (as stated). I then received another email asking if everything arrived ok and if there were any questions. In short, an excellent experience throughout. Love my new hitch and it looks great on my truck. I will definitely be sharing my experience with friends and family.
# 16
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise
It’s a great product and performed as I needed it. I need the two inch ball and the 2 1/4 in ball scraped the street as I was backing out. There should be a way to take the ball you don’t use off!
Nice looking and very well made. I will be hauling a 24’ enclosed trailer with combine weight of 6000 pounds. I am replacing a one piece steel unit that was showing signs of bending. This should be safer.
# 17
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
Better than the big box stores with a welded support underneath, and best price anywhere.
# 18
Convert-A-Ball Ball Mount for 2" Hitches - 4-3/4" Rise, 6" Drop - 14,000 lbs
They’re beat up! I mean I know they’ll get that way eventually but I shouldn’t receive them in sad shape. And the packaging….? How hard is your job? ??
Nice looking product. I have every confidence it will work as advertised. Paid a little more $ but it’s made in the USA.
# 19
Curt Forged Ball Mount for 2-1/2" Hitches - 1/2" Rise - 2" Drop - 20,000 lbs
Better than the big box stores with a welded support underneath, and best price anywhere.
Very good heavy duty rating which is what I wanted. etrailer was great to work with
# 20
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.
What our customers are saying:
"Very nice people that I talked to. Got what I paid for, very good product, will shop again. thanks."