bing tracking image
  1. Trailer Hitch Ball Mount
  2. Fastway
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 6 Inch
  6. Rise - 7 Inch
Solid-Tow Adjustable 2-Ball Mount w Stainless Balls - 2" Hitch - 6" Drop, 7" Rise

Solid-Tow Adjustable 2-Ball Mount w Stainless Balls - 2" Hitch - 6" Drop, 7" Rise

Item # DTSTBM6600-2S
lowest price pledge
Our Price: $265.00
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 18 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Switch easily between trailers with this adjustable, aluminum ball mount. Go from a 6" drop to a 7" rise. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball. Solid-Tow system prevents rattling. Lowest Prices for the best trailer hitch ball mount from Fastway. Solid-Tow Adjustable 2-Ball Mount w Stainless Balls - 2" Hitch - 6" Drop, 7" Rise part number DTSTBM6600-2S can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (192)
  • Q & A (0)
  • Photos
  • Why etrailer?

Fastway Trailer Hitch Ball Mount - DTSTBM6600-2S

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 6 Inch
  • Rise - 7 Inch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • Class IV
  • 10000 lbs GTW
  • Anti-Rattle Shank
  • Fastway
  • Aluminum Shank - Silver
  • Stainless Steel Ball

Switch easily between trailers with this adjustable, aluminum ball mount. Go from a 6" drop to a 7" rise. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball. Solid-Tow system prevents rattling.


Features:

  • Adjustable ball mount makes it easy for you to haul different trailers
    • Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
    • Reversible ball platform lets you swap between 2 different-size balls
  • Self-tensioning, anti-rattle Solid-Tow system tightens ball mount inside receiver tube and secures ball platform to ball mount
    • Stops rattle and clunk
    • Uses internal, stainless steel bolts for long life
  • Adjusts with Allen wrench (included)
  • Ball mount is machined from a solid piece of aircraft-grade billet aluminum
    • Solid aluminum produces a lightweight yet strong ball mount
      • Avoids welds, which can cause weak points that might break
    • Polished finish creates a high-quality appearance
  • (2) 303 Stainless steel hitch balls included
    • 303 Stainless steel is great for marine applications and highly resistant to corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • Made in the USA


Specs:

  • Fits: 2" x 2" trailer hitch receivers
  • Ball diameters: 2" and 2-5/16"
  • Towing capacity:
    • 2" Ball: 8,000 lbs
    • 2-5/16" Ball: 10,000 lbs
  • Tongue weight capacity: up to 1,000 lbs
  • Maximum rise: 7" from the top of the hitch receiver opening
  • Maximum drop: 6" from the top of the hitch receiver opening
  • Distance from center of hitch pin hole to back of upright bar: 4-1/4"
  • Distance from center of hitch pin hole to center of ball: 8-1/2"
  • 1-Year limited warranty


Ball mount shank showing pin in lowered positionBall mount shank showing pin in raised position

This Fastway Solid Tow adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in your receiver.


Ball mount shank showing platform-to-leg bolt

To further eliminate any movement, a bolt in the side of the ball platform tightens the connection between the platform and the adjustment shank. As a result, you'll enjoy a quiet, rattle-free towing experience.


Ball mount shank showing ball-to-platform bolt

The ball platform is connected to the adjustment shank by the hex bolt located in the front of the platform. To change the ball height, simply loosen both the bolt in the front and the bolt in the side of the platform with the included tool. This will release the ball platform and allow you to slide it up and down. Or, you can slide the platform off and reverse it to change the ball size.


How to Measure Drop on Adjustable Ball Mount


DT-STBM6600-2S Fastway (Diversi-Tech) Flash STBM Series Solid Tow Ball Mount - 6" Drop, 7" Rise Adjustable Hitch - Solid Billet Aluminum






Customer Reviews

Solid-Tow Adjustable 2-Ball Mount w Stainless Balls - 2" Hitch - 6" Drop, 7" Rise - DTSTBM6600-2S

Average Customer Rating:  4.8 out of 5 stars   (192 Customer Reviews)

Switch easily between trailers with this adjustable, aluminum ball mount. Go from a 6" drop to a 7" rise. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball. Solid-Tow system prevents rattling.

- DTSTBM6600-2S
by:

First of all, it’s beautiful; fit and finish is as it should be for the price. No rust stainless hitch ball ends are great. I use this on a Chevy Silverado 1500 with the max tow package pulling a 24’ 5800 lb. boat on an aluminum trailer. It pretty much is one position so I can’t say how quick and easy it is to routinely change from one ball size to the other or hitch height, but I can tell you that it all works flawlessly. The only downside is that it’s heavy so storing it in a foldaway tool box in my truck bed is fine but it’s a load. In use it never rattles or shakes and it’s because of the clamping lock. But that can only be used in dropped position, which is how I use it. If you need a great multi ball unit that looks and works really well, this one is for you.


Comments
After a year I don’t find that I need to take advantage of the adjustability as I did when I first bought it. The anti-rattle device still works great and barring a good size scar from someone backing into it at some point the one time I left it place during the week it still looks great and works great. I pulled out tools from my storage bin so while it’s still heavy keeping it in the bin is no longer a problem.
Chris M - 03/29/2021


- DTSTBM6600-2S
by:

Hitch was really loose, has lots of slip in the receiver. Pretty disappointed in it.


Comments
I am sorry to hear that you are not satisfied with this ball mount. This ball mount has a stainless-steel pin operated by a hex tool that tightens the ball mount in your receiver in the position. I will attach a video guide on how to use it. For further anti-rattle protection, you can use a U-bolt device like item # RM-061
Roadmaster Quiet Hitch for 2" Trailer Hitches
$27.95
.
-- Etrailer Expert Sierra K - 12/07/2021


- DTSTBM6600-2S
by:

The materials and machining are very nice, making it beautiful and precise. I like the craftmenship and detailed notches on the vertical bar. Already use both 2 and 2-5/16 balls so it was easy to chose this item for my needs. The only thing that I would change is having access to individual and separate ball installation to that the upsidedown ball doesn't scrape the ground if you choose to run it at the lowest setting.



- DTSTBM6600-2S
by:

I need several inches of adjustability for two trailers. This can handle the 5" rise needed for my kayak trailer and the level tongue of my 20 foot sailboat trailer. The security and anti rattle features are a great design. The polished aluminum mount and stainless hitch balls look like an appearance accessory.


Comments
This hitch works really well after a year. I still need the adjust ability and the fit and finish are like new.
John M - 06/09/2018



- DTSTBM6600-2S
by:

I tow boats, mostly antique and classic wood boats, but just plain lots of boats. My Ram diesel stands tall. Every trailer stands differently. Finally I have a ball mount that is adjustable so virtually every trailer I hook onto rolls flat. Adjusting up and down is trivially easy. The tensioning mechanism is bullet proof. Itowed a 7,000 pound boat and trailer back from western Kentucky and up 83 through PA. The ball mount stayed where I put it and did not loosen up one iota. And the solid two receiver tensioner is to die for. For the first time I can listen to my music instead of a "sympnony" of rattles as the ball mount bounces in the receiver each time the smallest bump in the road is encountered. Finally, it is way cool looking. Never before have I had people stop, walk over and say, "Whoa! I've never seen a hitch as cool as that one."



- DTSTBM6600-2S
by:

Out of the box showed the quality of work to be incredible. Once I installed the hitch I was disappointed to see that the installed anti-rattle device does not make 100% contact (more like 50%) in the receiver as intended with the locking pin installed. No matter how much the locking screw was tightened any weight or jolt on the hitch would cause it to rattle. The vehicle this was installed on was a 2011 Tundra CrewMax 4x4. I understand this is a universal hitch for many vehicles but it appears the locking pin hole could be moved forward approx. 1/2 to 3/4" to correct this problem. If you are buying this product due to it's corrosion resistance it has my vote, but if the installed anti-rattle pin feature is critical look for a different brand on 2011 Tundra's.



- DTSTBM6600-2S
by:

This thing is amazing. Adjustability is perfect. Has held up well to very heavy loads. No trailer rattle. Happy to have purchased a lifetime worthy hitch. 10/10 would recommend!



- DTSTBM6600-2S
by:

This is my second one I've ordered from eTrailer (10"drop & this 6"). Absolutely great product! This time around, I went with stainless steel balls... They should look beret, longer. Only reason for a second is because of a new truck. The old truck had a 9" lift and 37" tires.



- DTSTBM6600-2S
by:

Product quality is excellent. It is very convenient allowing me the versatility of five or six receivers in one. Provides me with all of my towing needs. Thank you



- DTSTBM6600-2S
by:

Product looks great. The built-in anti rattle device on mine appears to work good. I am happy with the ball hitch and the way Etrailer handle my sale and quick delivery.



- DTSTBM6600-2S
by:



- DTSTBM6600-2S
by:



- DTSTBM6600-2S
by:



- DTSTBM6600-2S
by:



- DTSTBM6400
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


It is difficult to find an adjustable, quality receiver hitch that also provides a way to secure BOTH the shank and the ball assembly to the vehicle against theft. The FastWay unit’s use of a secure Allen screw is certainly not ‘Fort Knox’ safe, but is more than its competitors have. I took advantage of a “used” unit etrailer listed and was very pleased upon receiving it that it was like new with only some minor scratches- just as described.


Comments
UPDATE: After about a year and a half I have hadthe following experiences. The manufacturer replaced the hitch after it became difficult to loosen the pin to adjust the hitch height. It had been lubricated as specified but became very tight and felt as if it was cross-threaded. I have become disenchanted with the tamper-proof design of the adjustment and locking pins. I am in the cold northeast and they tend to get iced in and difficult to remove. The height adjustment pin has become damaged from my not consistently being able to the wrench fully into the cavity. I would like to see a different type of boltpin used.
Ken K - 03/18/2021


- DTSTBM6400
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


I initially loved the hitch because it was tight in receiver and unlikely to be stolen. Over time it has become harder to keep the anti rattle screw and pin tight, I tighten it just about everyday now. There are also rough spots that have developed in all the screws, I suppose from the set screw tightening against the threads. The hitch is a good value for the money, as it does its job of being an adjustable hitch.



- DTSTBM7000
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


Needing at least an 8" drop I ordered the 10" drop to be sure I had enough leeway for adjustment in case my vehicle was heavily loaded with gear. The anti-rattle feature is what really made me choose this hitch. I'll be towing a boat 7,000 miles this summer and did not want to hear any squeaks and eliminate anything that could contribute to trailer swaying. In order to be sure the anti-rattle pin would make contact with my receiver I inquired with both the manufacturer and etrailer. Fastway customer rep said the distance was 3-1/2" and Etrailer said it was 2". Needless to say when it arrived it measured 2" which is perfect for my 2016 Suburban. You may want to double check with etrailer on the 2" measurement before ordering in case the manufacturer has modified the design. While the anti-rattle pin does eliminate up and down motion a little left to right movement remains. I may fabricate a narrow shim to eliminate all movement but at this time I do not think it will be necessary. Since I am using this on what is almost the lowest height setting with the 2" ball the 2-5/8" ball is just 10 1/4" above the ground. The hitch balls are not removable from the sliding mount therefore you either have to be careful not to bottom out or for more clearance Fastway said I could cut the 2-5/8" ball off the mount. This would make the ground clearance 12-1/4" off the ground. As others have stated it is a beautiful piece of hardware and looks really sharp. I will likely leave on on permanently with a BOLT trailer hitch receiver lock. (Be sure to order the correct one!). Leaving it permanently mounted has one benefit- I think drivers from behind will be more wary of stopping too close and rear ending you and if they do rear end you at a slow speed it will absorb a bit of the impact thereby minimizing damage to your vehicle. Thank you etrailer.com for such excellent service and I highly recommend them for your hitch needs.



- DTSTBM6400-2S
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


Excellent product. I installed on my 2014 Ram 1500 and the anti rattle pin was completely inside the receiver unlike what some of the other reviews show. There is absolutely no rattling. I believe the part number is diversitech, but this is in fact a fastway flash ballmount. As always, quick shipping from etrailer and the best price I've seen anywhere.



- DTSTBM6825
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


This is a solid well built aluminum ball mount but, on a 2015 dodge 2500 class 5 receiver the anti-rattle pin on the ball mount only catches 1/4 of the round pin in the receiver tube. The hole for the locking pin is close to the end of the tube of the receiver on the truck, so the ball mount sticks out in the receiver tube (in my opinion) too much for this to work as it was intended. Etrailer said it should work in there opinion but when you spend over 200 dollars for a ball mount it should work as intended and not "it SHOULD be fine?" Will be contacting Diversi-tech as well. etrailer is great a place to order from and quick shipment as well!



- DTSTBM7000
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


This drop hitch is a true champion! I have a '09 Ford F-250 with 4.5" of suspension lift on 37" tires, and this hitch is more than adequate for all types of towing applications. I just got back from towing a 7500 pound load for 10+ hours. I was on bumpy roads, interstates, and in some sketchy situations, but not once did I have to worry about the hitch. And on top of that, it was QUIET!! I locked down the tension bolt for reducing the movement, and it never moved or made a sound after that. And it looks SICK! I would highly recommend this to anyone



- DTSTBM6800
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


Great looking adjustable hitch. I purchased the non-locking version because locks and similar mechanisms seem to have issues due to salt and ice here in MN. Not sure if the locking version would have issues, but I didn't want to take the chance. Hitch is easy to adjust, seems very strong, and looks great.



- DTSTBM6400-2S
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


Solid workmanship of the hardware. Works great on my Wrangler. Perhaps even more impressive the excellent service from etrailer.com. Shipped the same day (and not just issuing a tracking number, no, actual packing and surrendering to the shipping company). Outstanding!



- DTSTBM6600
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


I ordered this trailer hitch for my Nissan Titan and a our new 26’ boat. I searched Another online retailer and several other sites to find the right hitch solution; I also checked out an online video on it before buying. I was blown away by how well-made it is, not to mention how great it looks on my truck. I received this product in less than a week, in perfect condition. Great product, great service; can’t ask for much more. I’ll definitely be back to etrailer.com if I need anything else!



- DTSTBM6625
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


Yes the hitch arrived yesterday with my UPS guy complaining that such a small box could be so heavy! I did a test install on my new 2500 Ram Diesel with 2-1/2" receiver. It fits perfectly and cranking down on the set screw makes it absolutely unmovable in the receiver. I do wish the tongue was a bit longer, as the ball mount ends up pretty close to the bumper, but that is a small concern. The entire unit is extremely well made, and the up/down adjustment of the ball mount component is smooth and effertless.


Comments
Is the shaft on this model a true 2.5 inch shaft without an adapter sleeve. The photographs above have no shaft but I am not sure if it was simply removed for the photographs or if this is a true 2.5 inch shaft. If it is a true 2.5 inch shaft then the anti-rattle pin will work much better than on a model where it also has to compensate for the sleeve.
-- comment by: Jonathan H - 02/23/2014

The 2-1/2 inch versions of the DTSTBM line do use an adapter sleeve. They use an extended length anti-rattle pin that passes through the adapter to make contact with the receiver just like the 2 inch counterparts. Check the link to the photo, its the shorter 4 inch drop version of this hitch.

-- Etrailer Expert Patrick B - 2/28/2014

Comments
I love that ball mount, so much so that I found a second one listed on VT Craigslist with a 2 & 1-7/8 combo ball mount. The Diversi-Tech units really do absolutely stop the trailer from bouncing in any way. They are so simple to adjust for my various trailers that I carry nothing else in the truck.
Michael C - 01/30/2015



- DTSTBM7000
by:

Review from a similar Solid Tow in Trailer Hitch Ball Mount


Great pricing...I called and spoke to Caleb and the hitch I was inquiring about was on backorder.... Caleb went above and beyond and got me the next size up and shipped it the very next day (I called too late for it to go out that night). I explained that it was imperative to have the hitch before the weekend.... he assured me it would be there by Thursday. It got to me on Wednesday. Great service, great price. The hitch worked flawlessly and made me feel better about spending so much!!


Comments
So far so good. Its been really good and Im glad I got this particular one.
Ernest T - 04/21/2016


28
198
Show More Reviews

Ask the Experts about this Fastway Trailer Hitch Ball Mount

  • Can Diversi-Tech Adjustable Ball Mount # DTALBM6625 be Used Without Outer Sleeve in 2-Inch Hitch
    The steel sleeve around the shank of the USA-made Diversi-Tech Adjustable Ball Mount # DTALBM6625 is not a removable component, like an adapter. It is part of the integrated locking mechanism that secures the shank in your receiver tube. This ball mount is designed for use only in 2-1/2-inch hitch receivers. It cannot be used in a 2-inch hitch. The linked video will help illustrate the operation of the lock mechanism. We do offer a comparable product from Diversi-Tech designed for 2-inch...
    view full answer...
  • Adjustable Ball Mount with Stainless Steel Balls Recommendation
    For a similar ball mount as the Rapid Hitch Adjustable, Aluminum Ball Mount Kit # AM3410 that you referenced that has stainless steel balls check out the Solid-Tow Adjustable, Aluminum Ball Mount # DTSTBM6600-2S. This ball mount has a similar rise/drop and has stainless steel 2 inch and 2-5/16 inch balls so it should work well for you.
    view full answer...
  • How to Replace the Ball Set in a Diversi-Tech Ball Mount
    To replace the ball set of your Diversi-Tech ball mount like the part # DTSTBM6600-2S with the # DTBM28 that you referenced is pretty easy actually. Here's how you would do it. 1.Loosen the hex bolt that holds the ball platform to the ball mount and slide the platform off the mount 2.Run the hex bolt that holds the balls in the ball platform all the way in (be sure to run the bolt in, don't back it out) 3.Slide out the old ball set 4.Reverse the order to install the new ball set
    view full answer...
  • Can the Dual-Sided Hitch Ball Be Replaced on the Fastway Flash E Series HD 2-Ball Mount
    The Fastway Flash E Series HD Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 6" Rise - 18K # FA42-00-2625 is not designed to have the ball mounts removed. They are held in place with a bolt but according to Fastway it is likely you would damage the threads on the bolt if you attempted to remove it. Therefore it is not recommended and not compatible with the # TB02 Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for 180 Hitch 2-Ball Mount - 18,500 lbs. If you want to be able to remove...
    view full answer...
  • Troubleshooting Tandem Axle Boat Trailer Equalizer Contacting Frame on Rear Spring
    There are a few things I would recommend checking before you start swapping parts. First will be to check the weight distribution with the boat on the trailer. Typically when the rear is hitting the frame like you have the weight may be to much on the rear of the trailer and the boat should be moved forward or gear on the boat moved to better evenly distribute the weight across the entire trailer. Second I would ensure that the boat trailer is pulling level when connected to the tow...
    view full answer...
  • Storable Bag for the Solid-Tow Adjustable 2-Ball Mount
    Fastway does not make a storage bag specifically for the Solid-Tow Adjustable 2-Ball Mount part # DTSTBM6600-2S. However, we do have the Bulldog Winch Heavy-Duty Rigging Bag part # BDW20058 which should have no problem toting around the Solid-Tow ball mount. It is designed for heavy duty winch equipment so you won't have to worry about the handles breaking off or the material ripping as it has a 100 lb weight capacity.
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Raymond P
Written by:
Raymond P
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Randy B
Installed by:
Randy B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624