bing tracking image
  1. Trailer Hitch Ball Mount
  2. B and W
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 3 Inch
  6. Rise - 3 Inch
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black

B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black

Our Price: $249.00
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 29 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball. Lowest Prices for the best trailer hitch ball mount from B and W. B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black part number BWTS10047B can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (2911)
  • Q & A (0)
  • Photos
  • Why etrailer?

B and W Trailer Hitch Ball Mount

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 3 Inch
  • Rise - 3 Inch
  • 1-7/8 Inch Ball
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Three Balls
  • Class IV
  • 10000 lbs GTW
  • B and W
  • Steel Shank - Matte Black
  • Steel Ball

Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.


  • Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Stowable design lets you store ball and mounting platform underneath your vehicle
    • Remove pins holding ball mount platform in place on shank
    • Flip platform underneath the hitch
    • Reinsert pins and clips to secure ball mount platform for travel
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount up or down along shank and secure in place with included pins and clips
  • Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch
    • No additional locks required to prevent platform and balls from being removed
  • 3 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove pin, rotate balls, and reinsert pin
  • Dual-process chrome plating on balls provides excellent rust resistance
  • Black powder coated shank is corrosion resistant
  • Stainless steel pins create sturdy, rust-resistant connections
  • Durable steel construction with high yield tubing offers superior strength
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight:
    • When used with 1-7/8" ball: 3,500 lbs
    • When used with 2" ball: 7,500 lbs
    • When used with 2-5/16" ball: 10,000 lbs
  • Distance from center of hitch pin hole to center of hitch ball:
    • Hitch pin hole closest to ball: 9-1/4"
    • Hitch pin hole farthest from ball: 10-3/8"
  • Distance from center of hitch pin hole to pin hole in mounting block:
    • Pin hole closest to mounting block: 3-3/4"
    • Pin hole farthest from mounting block: 4-7/8"
  • Maximum drop: 3"
  • Maximum rise: 3-1/2"
  • Incremental height adjustment: 1"
  • Minimum clearance: 11" from ground to lowest point on Tow & Stow hitch
  • Limited lifetime warranty


  • Requires a minimum of eleven inches of clearancebetween the ground and the lowest part of the hitch
  • Without adequate ground clearance, the hitch may hit theground or other objects such as steep driveways or curbs
  • Striking any obstacle may cause damage to the hitch that could affect its integrity

The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.

Easily Adjusts and Stows

B&W Tow & Stow Ball Mount Operation

To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.

Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.

When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.

Built-In Anti-Theft System

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.

Single Dimensions

A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.

When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.

How to Measure Drop on Adjustable Ball Mount

TS10047B B and W Stow and Tow Triple Ball Mount - Model 6 - 1-7/8" Ball, 2" Ball, and 2-5/16" Ball - Black

Item # BWTS10047B

California residents: click here

Customer Satisfaction Score:

Customer Reviews

B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black - BWTS10047B

Average Customer Rating:  4.9 out of 5 stars   (2909 Customer Reviews)

Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.


I like that it stows under the truck and i'm not banging my leg and getting grease on myself. The only draw back was i wanted to use my anti slap bracket and it would not fit due to the insert butts up to the hitch receiver. I'm not experiencing any slapping when taking off or stopping at this time.I use this for my boat and a utility trailer and i don't have to change hitch insert which is really nice, one less thing to do.


New buy but they seem to be well built. I like that the lock screws into the pin as opposed to the assembly that latches on (I’ve seen video where those can be forced off).

Highly recommended. I bought locking pins so that i can keep it mounted 247. Would buy this product again. Very sturdy, well worth it.
Las - 02/20/2022


Item was described very well. Shipping was fast as well. The ease of changing the ball for the application i need, and stowing away when not needed make this hitch the only one I'll ever own.

Its working fantastically. So easy to have a one size fits all hitch. I do keep it lubricated just a bit on the pins. But thats because I keep it on the truck year round.
Mark - 05/06/2021


Love my 3 way B & W hitch. So convenient because I tow different trailors and just flip
To the size I need. Also like the
Way if stores under bumper.


This BW hitch is very well made!
hitch is really rugged and multi functional.
Made in America! Great craftsmanship!
Reasonable price and fast shipping from E-trailer as usual.


I was able to order my new BW Hitch and it fit perfect for my 2022 Chevrolet Colorado ZR2 Bison. Very pleased with the ordering and delivery process and the price was cheaper than most places I checked. Thank you for your service and will order again in the future.


This is a great quality product and is changed easily to fit out of the way.


I bought this because I got tired of having to change hitches for my 3 trailers with 2 different size couplers. This hitch system appears to be very well made. It's got some weight to it and is very solid. Adjusting the height and ball size are both simple processes. Would highly recommend this.


I will recommend your products to everyone I know that needs this or something else


Product arrived in a timely manner and was packaged as I expected. I’ve had B&W hitches in the past and this one is right in line with the ones I’ve had. It’s definitely worth it to spend the money on a B&W. It would be nice if they came up with a package to buy a locking hitch pin and dampener with it though.


Love it. Very functional and productive for my needs.

I love it. Thanks for the follow up
Dwayne D - 01/06/2018


This is the second one of these I have ordered for the guys in our construction co. They said they are better than any other hitches, that they have had in the past. Had to return one for a bigger size and customer service was excellent.


I definitely recommend this hitch
dont have to be switching hitches anymore for different high and ball size
All I jave to do its rotete the ball and adjust the high easy to do
And make my jod easier
And Etrailer awsome customer service
And fast shipping


Great hitch. Has high quality craftsmanship. Stow feature is awesome to keep from hitting your shins


I have owned this hitch for a little over 1 year now. It has never left my receiver on my F150. It has survived the IL winter without any rust forming or issues with the pins jamming. I do keep the pins well greased as well as a light coat on the tri-ball at all times. The adjustability is good for my applications and fits my 3 trailers great. I have little to no rattle from the hitch itself going down the road. Buy once, cry once when it comes to this hitch. You will not be disappointed.

*One disclaimer, on this 3" drop, if you have an 2020 F150 like I do, you cannot rotate the ball when stowing to where the 1 7/8" ball isn't pointing towards the ground. There isn't enough space, even at the lowest setting, to get it to tuck up and not touch the frame. If ground clearance is an issue, I suggest going to a 5" drop to tuck the ball up.*


Excellent product. Solves so many problems for me with easy locking, folding storage to save the shins, and versatility with tongue height and trailer hitch ball size. After 40 years of hauling all types of trailers, this could be the last hitch I ever have to buy!!

After one year with this BW hitch, I am even more impressed. It meets all my towing needs. You do have to keep the pins lubricated, but other than that no issues. Go ahead and invest in the locking pin so you can just keep it on your truck year round.
Terry C - 09/16/2020


Perfect over all! I have had no problems so far. If you are looking at improving the product, the sleeve needs to be a bit thicker to fit tighter in the truck hitch.


I purchased the B&W from George at and after much research online I found the best deal. The shipping was super fast, and the product is absolutely top of the line. I have used this receiver a couple dozen times over the past year and I am impressed more and more every time I use it. From pulling a small 10' utility trailer to a 31' Center Console, this receiver makes it happen! Only downsize is I should have just gotten the 2 ball and not the Tri. I do not own anything that is 1 7/8" however if I ever need it I have it along with the 2" and 2 5/16".

Great customer service and pleasure to do business with. I will buy more products form this company.


Great product, but with the three-ball mount, when stowed, the center ball faces down. No issue, but it just looks a bit odd. A two-ball would eliminate that unless you really need all three.


Great product. Really saves time when switching hitch sizes.


Perfect. I love this hitch.


Its like a very heavy duty swiss army knife for towing. I had a straight tri-ball hitch that didn't allow height adjustment. I needed that ability, this hitch solved my problem. Great product, I wish I'd have caved in and bought this hitch years ago.


Well built and easy to use.


Great set up! Stow away action is awesome, cleans up the back area of truck. Well built with minimal play in receiver hitch. Pins have almost not play which is great!


Very sturdy, love the options to change balls without changing a entire hitch. It will be used to tow a trailer that is used for business purposes. It allows for different height adjustments and ball sizes all contained to 1 hitch. What a problem solver this is!!!

Excellent product, so versatile!
Justin H - 07/23/2017

Show More Reviews

See what our Experts say about this B and W Trailer Hitch Ball Mount

  • Ball Platform On 3" Drop B&W Tow & Stow Hits Bumper When Stowing
    In regards to the B&W Tow & Stow 3-Ball Mount part # BWTS10047B, so long as you have the hitch balls pointed down there should be no issues stowing the ball platform under the receiver tube. I suppose there could be some odd setups that don't allow for this on the 3" drop version and for those instances I recommend the 5" drop version part # BWTS10048B. I can't recommend only using one pin to secure the ball platform in the stowed position due to the risk of the ball platform failing due...
    view full answer...
  • Distance From Top of Receiver to Bottom of 2-5/16" Hitch Ball on B&W Tow & Stow 3" and 5" Drop
    I went to the warehouse to take some measurements and found that from the top of the receiver to the bottom of the 2-5/16" hitch ball was approximately 10-1/2" for the B&W Tow & Stow 3-Ball Mount with 5" of drop # BWTS10048B while the B&W Tow & Stow 3-Ball Mount with 3" of drop # BWTS10047B measured approximately 8-1/2" from the top of the receiver to the bottom of the 2-5/16" ball.
    view full answer...
    Image 1 for
  • How Much Ground Clearance Do You Lose With the B&W Tow & Stow BWTS10048B
    The distance from the top of the shank to the bottom of the platform on the B&W Tow & Stow 3-Ball Mount part # BWTS10048B while in the stowed position is 8-1/2". I am not sure where you were measuring from but if you measure from the top of the receiver tube opening to the ground and then subtract 8-1/2" that will then give you your ground clearance measurement. Unfortunately, there are too many variables at play to give you a definite answer as to whether or not it will scrape but you...
    view full answer...
    Image 1 for
  • Lighter Weight Adjustable 3 Ball Mount for 2 inch Hitch
    The Curt Multi-Ball Adjustable Ball Mount # D900 does weigh 45 lbs. If you wanted a lighter tri-ball setup you'd want to look into something like the B&W Tow & Stow 3-Ball Mount # BWTS10047B which only weighs 28 lbs and has the same specs aside from that. I attached a review video for this for you to check out as well.
    view full answer...
  • What is Weight Capacity of B&W Tow & Stow 3-Ball Mount # BWTS10047B
    The B&W Tow & Stow 3-Ball Mount # BWTS10047B referenced in your question includes 3 different sized hitch balls and its weight capacity will depend on which size hitch ball you are using. When used with the 1-7/8 inch ball, it has a 3,500 pound weight capacity and when using the 2 inch ball it has a 7,500 pound capacity. When using the 2-5/16 inch hitch ball, the towing weight capacity increases to 10,000 pounds. This adjustable ball mount has a maximum drop of 3 inches and a maximum...
    view full answer...
  • Recommended Locks for B&W Stow and Go Ball Mount in Hitch
    The hitch lock I recommend for the B&W Stow and Go Ball Mount # BWTS10047B, you were looking at, is the # BX8858. Currently, there is no lock available that will replace the adjustable pins on the B&W ball mount. If your coupler is locked to the hitch ball it would take someone with this exact ball mount assembly to be able to steal your trailer so it would be highly unlikely. I have linked the above mentioned products to this page for your viewing and purchasing convenience.
    view full answer...
  • Locking Hitch Pin Recommendation for B&W Tow & Stow 3-Ball Mount BWTS10047B
    B and W recommends their hitch lock part # BX8858 for use with the Stow and Tow Ball Mount part # BWTS10047B that you referenced.
    view full answer...
  • Is Roadmaster Anti-Rattle Device OK to use With B&W Ball Mount?
    So long as you have a ring or collar like in the accompanying photo, you will be fine using an anti-rattle device such as the Roadmaster Quiet Hitch # RM-061.
    view full answer...
    Image 1 for
  • Recommended 3 Hitch Ball Combination Ball Mount Comparable to the 2 Ball # BWTS10033B
    There is a 3 ball option similar to the B&W # BWTS10033B you referenced. It is the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black # BWTS10047B. This hitch will have all of the same functions with the stowable feature for a clean look that protects your shins, and also the adjustable rise and drop in 1 inch increments to allow you to tow all 3 standard trailer coupler sizes. I also recommend the locking hitch pin # BX8858 to secure your investment and deter theft.
    view full answer...
  • Height Difference of the 3" and 5" B&W Tow and Stow 3-Ball Adjustable Ball Mounts
    Out of those two options, I recommend the 3" Drop B&W Tow & Stow 3-Ball Mount item # BWTS10047B for your 2019 Ford F-150. Both the 3" B&W Tow and Stow item # BWTS10047B and the 5" B&W Tow and Stow item # BWTS10048B are recommended to have 11" of clearance from the lowest portion of the ball mount to the ground so you don't have to worry about hitting the ground. So the 3" drop one would be better than the 5". I have linked a diagram below that will show you the overall lengths. While...
    view full answer...
    Image 1 for Image 2 for
  • Vertical Dimensions of B&W TS10033B and TS10047B
    The height of the # BWTS10047B B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise is 8-1/2." The # BWTS10033B B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise height is 6-1/2." They do have a stowable design which lets you store the balls and mounting platform under your vehicle. The platform flips underneath the hitch for both models I have attached a video review for both which includes a demonstration of the stowing feature.
    view full answer...
    Image 1 for Image 2 for
  • How to Determine Correct Hitch Ball Size for a Fulton Coupler
    The Fulton Fas-Lok Coupler # F222000301 does have the same 22 200 SAE Class 2 numbers that you referenced but that has to do with the testing as opposed to the hitch ball size. If you check out the picture that I attached you can see that the handle itself has 2" Ball engrave on it. Your coupler should have this on the handle or on top of the coupler part that sits directly on top of the hitch ball. If you still can't find it then you should be able to go to your local home improvement...
    view full answer...
  • Trailer Hitch with Most Capacity for 2019 Ford F-150 Truck
    The trailer hitch with the most capacity that fits your 2019 Ford F-150 is the Curt # C26HR, which has a 1,000 lb tongue weight capacity and 10,000 lb towing capacity. This is a Class IV hitch with a 2 inch receiver that is a complete bolt-on installation which does not require any type of drilling into your truck's frame. This hitch has a mostly hidden crosstube, as you can see in the accompanying photo, so your 2019 F-150 can maintain its factory appearance. The Curt # C14017 is made...
    view full answer...
    Image 1 for
  • Coupler Height of Yakima EasyRider Double Decker Trailer
    From the ground to the bottom of the coupler for the Yakima EasyRider Double Decker Trailer # Y08129 it measures 16". To ensure that you tow the trailer level you just need to measure from the ground to the top of the inside of the receiver on your 2020 Jeep Gladiator and then choose a ball mount that has the correct rise/drop that matches up to the EasyRider. I have attached a link to a helpful article about choosing a ball mount that you can reference. I tried to find what the height...
    view full answer...
    Image 1 for
  • How To Determine Correct B&W Tow & Stow 3-Ball Mount For 2 Inch Hitch
    You made a great choice with the B&W Tow & Stow, as it is considered by many to be the best ball mount in the industry due to its strength and anti-theft design of the platform. In order to determine which one is correct for your F-250, you will just need to take two different measurements to ensure you get the right one. Just measure from the ground to the top of the inside of your Ford's hitch receiver; next, measure from the ground to the bottom of your trailer's coupler and find the...
    view full answer...
  • Recommended Trailer Hitch for a 2020 Chevy Colordao
    I recommend the etrailer Trailer Hitch Receiver # e98909 for your 2020 Chevy Colorado for a few reasons; it features a hidden crosstube so that only the receiver is visible and then it has a matte black finish which not only makes it look more durable than a glossy finish, but it also plays the part as it does a better job of covering up any dings from road debris. Since you will be using this for towing you also need the Wiring Kit # HM11141144 as well as a ball mount. For the ball mount...
    view full answer...
    Image 1 for
  • What Is Needed To Tow With a 2011 Mercedes-Benz GL450
    The highest rated trailer hitch we have for your 2011 Mercedes-Benz GL450 is the Curt Trailer Hitch Receiver part # C13102 which does have a class III rating but is limited to only 3,500 lbs. The reason that this trailer hitch is rated so low is because it is designed to fit other GL models like the GL350 which has a much lower towing capacity when compared to the GL450. Therefore, in order to receive a trailer hitch that is capable of your vehicle's maximum trailer towing capacity of 7,500...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2017 BMW X1 Turbo Diesel
    For your 2017 BMW X1, I recommend the Draw-Tite Class III Max Frame # 76018 which is a confirmed fit for your vehicle. This is a 2 inch receiver with a durable powder coat finish. If you will be towing with this hitch, you will also need wiring and a ball mount with hitch ball. For your wiring needs, I recommend the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with Install Kit # 119190KIT. If you don't want to cut or splice your wires in your vehicle we also...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2018 Nissan Rogue
    For your 2018 Nissan Rogue, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Class III # 75902. This is a Class III hitch with a 2 inch receiver opening so it will give you the most options for ball mounts, bike racks, cargo carriers, etc. It will be stronger than a Class I or Class II trailer hitch, so you will be able to pull both trailers. For your wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56033. This wiring...
    view full answer...
  • What is the Highest Rated Hitch for a 2018 Subaru Impreza for Towing and Accessories?
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is a two inch trailer hitch receiver rated for 675 lb tongue weight and up to 4500 lbs towing capacity. There is no drilling required for this hitch installation. This receiver will work especially well with accessories like a bike rack or cargo carriers. The hitch pin hole is 3 inches recessed from the outermost part of the bumper which will be compatible with almost all 2 inch accessories. For your trailer hitch if you want trailer...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 1994 Ford F-150 with Roll Pan Bumper
    We have the custom fit for a standard or step bumper # 13028 or the deep drop bumper # 41504 confirmed to fit your 1994 Ford F-150 Flareside. The Roll Pan bumper does not have a custom fit, so if you don't want the long receiver tube, I recommend using an universal fit that you can customize for your truck fit. My recommendation is the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III # C13701. This hitch will require drilling into your frame and the crossbar...
    view full answer...
  • Recommended Hitch Extension for Ball Mount Use in Rise Position with Step Bumper on 2001 Ford E250
    For your B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black # BWTS10047B a hitch extension like the Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension # RM-071-75 will give you the extension needed to tow in the rise position but it will also take your hitch's tongue weight rating down by 50% (as you stated). Since you need 4-1/2 inches from the hitch pin hole to the closest part of the mount, you could also use a different ball mount for the...
    view full answer...
  • Trailer Hitch for Towing with a 2012 Chevy Tahoe
    The only trailer hitch that was designed for your 2012 Chevy Tahoe is the Curt Trailer Hitch Receiver # C13161. The Ultra Frame Trailer Hitch Receiver # 41947 is a pretty big hitch that is designed for a 2012 Chevy Silverado 3500 cab and chassis model which is pretty different to what you have. With that being said, it looks like your Tahoe has a towing capacity range of 5,200 lbs - 6,000 lbs so since the Curt is rated for a max of 6,000 lbs you will be able to tow with your Tahoe to it's...
    view full answer...
  • Recommended Trailer Hitch And Running Boards For 2017 Dodge Durango GT.
    For your 2017 Dodge Durango GT, the DeeZee NXc Running Boards with Custom Installation Kit - 5" Wide - Aluminum - Black Powder Coat # DZ16201-16241 are a confirmed fit. There is no drilling required as brackets bolt into existing holes in the vehicle rocker panels. The Curt Trailer Hitch Receiver Class III - 2" # C13182 you mentioned is also a confirmed fit for your vehicle. This hitch is not compatible with tow hooks, so if present, they will be permanently removed. If you will be towing...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch Ball Mount?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Adele M
Updated by:
Adele M
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.