Best 2017 Volkswagen Jetta Hitch Adapters

Product was delivered on-time as expected. This adapter is being used on a Volvo XC60 with a retractable receiver. Although it fit in the receiver the locking hitch pin did go all the way thru without a little brute force. Not sure if it is a receiver, adapter, or a hitch pin problem. Would have been nice to have a little more guidance.

So far, so good. Had to cut into the bumper if my 2011 Jetta in oder to make it work. Here is a picture.

The item was very well built and arrived quickly. The only complaint I have, is a problem I was expecting to have after reading another review, so I don't feel cheated, just a little disappointed: it doesn't really fit a 2013 Jetta Sportswagen with a U-haul branded hitch. It doesn't clear the bumper. The male part the goes into the receiver needs to be just about 1.75" longer (2.00" might be better) to clear the bumper. A suggestion would be to make the male appendage 2" longer and provide two holes so people can use either the shorter or longer extension, depending on how far out they need to go to clear the bumper. (I was able to make it work by chopping off a triangular part off the top part of the unit)

Worked out great for my family bike adventure. Traveled with that setup over 1000 miles and it was easy drive. I had cargo carrier on the bottom and bike rack on top, and with that setup and 4 people on board still plenty of ground clearance 11". Dual hitch is a solid piece of steel that can carry a lot of lbs. Just don't overload max. tong weight, need some room for safety!

Quality hitch. Quick shipping. Looks a little close to the motorhome bumper

The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.

Sits fairly loose in the 1 1/4" hitch receiver. Also didn't come with a hitch pin, so you have to buy that separately too.

Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.

Did the job

Super fast delivery. Fits 2” receiver. Very nicely painted to prevent rust. I’ve ordered many things from Etrailer and the delivery is always fast and products are just what Etrailer say they are.

I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.

Rattle’s excessively when there is not a load. the dual hitch is great. I am able to tow my trailer and carry my bike rack

Great double hitch adapter! Very well made and strong!

Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.

Works great. We're towing a jeep and have a bike rack behind our motor home.

I purchase this to use with a Thule bike rack. The Thule rack requires a 2-in receiver so this should have worked. However it's so shaky and loose that I didn't feel comfortable driving it down the street. I should have returned it but I went back to using another vehicle I have with a 2-in receiver.

Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.

The product is 5 star, packaging and shipping is a 0. I am not sure how this hitch extender ever made it to my residence due to the lack of proper packaging (see photo.) When the package arrived, I did not need to open the box, I only had to reach throught the hole and pull it out. This is not the first time I've had issues with etrailer packaging. When I ordered the extender, the screen showed I would receive it Saturday. Received it 3 days later.

I use this on my Yamaha Kodiak 700 and it works great with my cargo carrier. I needed an extender in order for the carrier to not rub against the back tires. No complaints.

Works well to tow utility trailer while utilizing bike rack. Does rust quickly. See picture after 7 months of spring to fall use.

Heavy duty. Probably overkill for our e-bike rack but we needed it lower. Thanks for the fast delivery.

It works well with our toyota corolla i use it to spin and park our 20 foot pontoon in tight quarters

I recently had a hitch installed on my car. Since the cargo carrier that I have was used previously without an adapter, I assumed that I didn't need one. Now trying to locate one was more of an effort than locating a hitch. The local auto parts stores of national brands don't keep them in stock. One store made an inquiry but didn't give me much hope. Now I can make a rode trip in confidence that the carrier will be secure as I head down the interstate.

Every thing worked as planned for a 2" bike rack. One thing I have looked for and not found at you site- an alternate for a 4 pin trailer electric connector that make is easier to connect. Just dielectric grease does not help

Work well to adapt my heavy duty two bike rack that holds electric bikes to the lighter receiver on the Hyundai Accent. Happy with the performance.

It worked, till it didn't. It's a short smaller tube inside a larger tube, only held together by two spot welds. The spot welds split/detached allowing the inner sleeve free movement! I have a bike w stinger expanded to grip the inner tube and a little safety catch on outside. The safety catch was the only thing keeping my rack from sliding completely off! For the price this should've been a solid milled piece. Don't rely on these welds unless you have two through hitch pins one on car and one through the adapter end.

Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.

The extension is a very well made double wall tube weighting about 70#. It is used to pull a boat, horse trailer or a Jeep on a F450 with a very big camper.

Heavy duty! Excellent product but did not have the bracket for the tailight extension. Of course the box was destroyed in shipping.

Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.

I purchased the hitch extension to accomendate our bike rack to go on the back of our truckcamper. I also purchased the bike rack and steps at all work perfectly together. The extension is very heavy duty and can be used for towing a boat. The only con was not the extension it was the packageing it beat itself up. I also added turnbuckles and safety chain and electrical extension.

this is exactly what I have been needing, don't know why I waited; Could never open the rear doors of the RV van w/ the bike rack mounted - always had to remove the two eBikes (and the rack unless I want to shin into it several times); Now - simple-pimple, the Saris Swing Away swings out to the right - and boom, easy access to the doors to get inside the rear of the van, for supplies. I love it!

Already have a Sris bike rack, has been an excellent rack and well be compatible with this hitch, both very well built