bing tracking image
Q & A Icon

Wiring and Connectors to Power 2025 Ford Maverick Truck Cap 3rd Brake Light  

Updated 10/07/2025 | Published 10/02/2025

Question:

I need to power the third high brake light on my 2025 maverick truck cap It already has a 4 and 7 pin hitch Outlet Would this unit work for this I would only use the red brake light lead and cap the rest

0

Expert Reply:

Hey Geroge!

You can use the Curt T-Connector Vehicle Wiring Harness # C59DR, but you'll also need an adapter that separates out the stop signal from your turn signals. The 3rd Brake Light Logic Module # PP20-702 is a great tool to use for this, but you could also just use this logic module directly without having to use the T-Connector kit.

I also recommend checking the back side of your 4-Way/7-Way connector. If it has the USCAR connection then you can use this plug and play wiring # C55384 instead of the T-Connector mentioned above so you don't have to get in behind our tail lights or run a 12V power wire to your battery.

It would also be helpful to use the parts # DW05712-1 and # DW05729-1 so it's easier to disconnect the power wire to your 3rd brake light when you remove your truck cap.

Which cap do you have on your Maverick?

expert reply by:
0
Jon G
George profile picture

George

10/3/2025

Thank you

Jon G. profile picture

Jon G.

10/3/2025

@George You're welcome!
George profile picture

George

10/4/2025

I have a ARE v model no dome lights just the high brake like

George profile picture

George

10/4/2025

Could I use part 56196 in conjunction with the plug and play modulite unit it looks stronger and I would just use the brake lead and cap the others Thanks

Jon G. profile picture

Jon G.

10/7/2025

@George Yup! You can use the Curt Converter # C56196 as an alternative.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>