Parts Needed to Tie Light Bar Into Reverse Light Circuit on a 2018 Ford F-150

Updated 03/20/2018 | Published 03/18/2018

Products Featured in This Question

Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn - 4-Pole Flat - 60" Long

(70)

$91.16

16 Gauge Primary Wire - Black - Per Foot

(61)

$1.14

Deka Wiring Snap Plug - Male - 16-14 Gauge Wire - PVC Insulation - Blue - Qty 1

(7)

$1.46

Deka Wiring Snap Plug Receptacle - Female - 16-14 Gauge Wire - PVC Insulation - Blue - Qty 1

(5)

$1.15

Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5

(1104)

$7.34

Question:

can i get a plug to tap in my brake /reverse / and turn signal light strip i got from u guys so i dont splice into trailer hitch harness. this plug would be at the bumper at the the hitch harness.

asked by: Dave S

Expert Reply:

The Rampage SuperBrite LED Tailgate Light Bar # RA960134 that you purchased has a 4-Way Flat connector on it which receives the stop, turn, and tail signals from your 2018 Ford F-150.

If you are wanting to also tie in your reverse signal then you will want to use 16 Gauge Wire # 16-1-1 along with quick disconnects like parts # DW05729-1 and # DW05712-1.

I also recommend using Butt Connectors # DW05744-5 to splice into your reverse light circuit.

Please note that this light bar was not designed to carry the reverse light circuit so tying it in could cause some problems.