bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. 4 Flat
  4. No Tow Package
  5. Trailer Hitch Wiring
  6. Vehicle End Connector
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Tekonsha

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Part Number: 118470
In Stock
$62.38
Retail:$99.61
You Save: 37%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118470 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (85)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring - 118470

  • 4 Flat
  • No Tow Package
  • Trailer Hitch Wiring
  • Vehicle End Connector
  • Plug-In
  • Tekonsha
  • Plug and Lead
  • Powered Converter
  • Hidden

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in trunk
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5.6 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed within your trunk.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118470 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118470 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

85 reviews
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:
2011 Nissan Altima

Super fast shipping and a great product.



by:

sure made the job easy.



by:
2010 Nissan Sentra

Wow what a great harness easy and neat no splicing wires.I highly recommend this product



by:
2012 Nissan Altima

Product was an easy install with perfect directions to follow along.



by:
2011 Nissan Altima

Great product. Easy installation. Super fast shipping.



by:

Great product and easy to install, only grip would be getting the wire from the under carriage up into the engine compartment was really difficult.



by:

Product just as described. Shipping was extremely quick and the installation video was much help and spot on. Installation time took me around 2 hours but this was my first time installing one. I would recommend to anyone.



by:
Nissan Altima

Very easy to install!!! The hardest part was running the cable to the battery from inside the car through the firewall!!! Note: Left front tire and splash guard on the Altima must be removed, in order to access the grommet with the factory harness towards the battery/fuse box for a clean install.



by:
2007 Nissan Sentra

trailer wiring kit-2007 Sentragood quality kit. it fits perfectly into the factory harness without cutting any wires. instructions and installations were excellent. a breeze to install. hardest part was running the direct wire to the battery, but that was only because i could not find a hole in the firewall but eventually i got it.



by:
2007 Nissan Sentra

The hitch that i purchased for my 2007 Nissan Sentra fit up very nicely and came with all the parts required to complete the job. The instillation videos on the web site made the process a breeze. The wiring harness also came with everything needed and there was also an instillation video available on the web site. I would Highly recommend Etrailer



by:

Shipping was a day earlier than promised! Can't beat the price ... anywhere! I got a Hidden Hitch and wiring harness. The only thing I noticed were a couple of small paint chips / scratches down to bare metal on the hitch frame. I sprayed undercoating over the entire frame so that I wont every have to worry about any rust. Thanks etrailer!



by:

Great product, good price and surprised by the high quality components. Installation was a breeze with the provided intructions. The harder part of installation was routing the power wire to the battery. Delivery to Mtl from order took 10 days to my door. USPS is great for shipping to canada and the parcel go thru the border without supplemental fee like thoses charged by FEDEX or alike providers.

Thank you very much, Jack.



by:

Pros: Instructions were easy to follow and the installation video was a good supplement.

Good shielding on the wires.

No splicing required.

Cons:

The trailer wire is a little on the short side. Would like to have a little more slack to the trailer.

Running a direct wire to the battery added a lot of time to the installation and added a lot more complexity.



by:

The kit was easy to install going only off the associated video on e-trailer website.



by:

I wanted to thank you guys for a great product. I belong to the Disabled American Veterans Chapter3 here in Columbus, Oh. We purchased your hitch and installed it for a 90-year old World War II veteran. We donated and also installed a carrier, which is slides into the hitch. The veteran can now load his scooter on the carrier and go where ever.
Thanks again.



by:

Installation was easy and quick, used hitch to bring camper I purchased home and worked excellent, very good purchase and product with very good instructions.
Thanks, AAAAA+++++++



by:
2014 Nissan Altima

Easy to install, instructions were very good. Works great.



by:
2007 Nissan Altima

Thanks etrailer for your informative videos. I haven't installed the connecter due to a busy schedule and it arrived earlier than anticipated. When my order was confirmed it said my part would arrive on Monday but it actually showed up on Friday. The parts sent were exactly correct and after watching the videos I saved 50% from the first quote that I was given locally. Also the reason that I'm confident about the right parts having been ordered and shipped is due to the fact that I installed the wrong parts that I was sold from auto zone earlier in my project. Next time I won't waste my time and money at local stores who employ zombies and I will highly recommend etrailer to anyone in the future.

David M. profile picture

David M.

5/18/2021

Easy install without any glitches



by:

This light wire kit was a snap to install, it took longer to remove the inside trim than it did to connect the unit. Great product!

Ron S. profile picture

Ron S.

5/23/2018

Its been great, no problems what so ever.



by:
2010 Nissan Altima

Good product. Installed in the trunk without a problem and I was able to route the trailer connector through the grommet under the spare and strap it to my hitch. This kept me from having to pull it out and close my trunk on it each time I was pulling a trailer. Be ready to spend some time making your way to the battery. That part is very time consuming. I was able to go along side my gas tank and run the wire with the break lines all the way to the front strapping it as I went along. My wire isn't going to be caught by a stray stick in the driveway!!



by:

This was such an awesome experience!!! My husband and I stumbled across etrailer.com when we searched for online videos on how to install a hitch. We then purchased all the materials needed directly from the website. Neither of us know a whole lot about cars but were able to easily install the hitch and wiring by watching their install video and the paper instructions sent with the products. The part of this experience I am MOST impressed by is when I got a call shortly after placing my online order to let me know that what I had originally purchased was not compatible with each other. She then continued to efficiently and successfully modify my order to all the right products needed and I didn’t have to do a thing! If that’s not great customer service then I don’t know what is!!! Without that phone call, I would have received incompatible products and been in a real pickle due to time constraints. THANK YOU SO MUCH ETRAILER! You guys rock! Because of you, I now have so much more confidence in doing self-maintenance on my car.



by:

Looks great, easy to install, good directions and product



by:
1997 Ford Ranger

Instalation was easy. It helps if your somewhat of a handy person. The trunk part was really easy. (be careful removing the rear plastic). Running the wires from the engine compartment took a little work. It help to have car ramps.
Watch the online video it will guide you.
I haven't pulled my trailer as of this review but I tested everything and it checked out fine.
Thanks



by:
2013 Nissan Altima

Unfortunately I ordered the wrong one at first, and spent way too long trying to make it work. Once I realized my mistake I ordered the right part. It took less time install this then it does for me to hook the boat onto the hitch. Yeah, I could have wired my own harness to the taillights, but this took no time at all. Well worth the price!



by:

I ordered the T-One vehicle wiring harness for my 2010 Nissan Sentra. Wow! The last time I wired a vehicle for trailer lights, I nearly needed an electrical degree. The folks who produced this harness has it all thought out for you and makes for a simple and reliable installation. In addition, the design provides you with all modular connectors, so there is no need to cut into the wiring on your expensive automobile. (No potential faulty hookups here!) You've got absolute safety without affecting your vehicle's warranty. Definitely worth the price, and you've got the excellant service that etrailer provides to each and every customer. Many thanks to Drew for his help in making my selection!


25
85
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Trailer Hitch for 2013 Nissan Altima Sedan that Does Not Require Drilling to Install
    The Curt # C11352 and Draw-Tite # 24796 require drilling in order to install on a 2013 Altima sedan. If you're needing the hitch as an attachment point for a bike rack or other hitch mounted accessory, I'd recommend the Draw-Tite # 24796. If your owner's manual or Nissan says it's okay to tow with your Altima, you might also need the following: A ball mount Trailer wiring harness, part # 118470 2 inch trailer ball, part # 19258 1-7/8 inch trailer ball, part # 19256 Locking hitch pin,...
    view full answer...
  • Compatibility of Curt Euro-Style Ball Mount w/ Draw-Tite Class I 24796 on 2010 Nissan Maxima
    When we installed the Draw-Tite # 24796 on a 2009 Nissan Maxima, we found that the hitch height and the setback was the exact same as the Curt # C11352 you referenced. This being said, the Euro-style ball mount won't work with the Draw-Tite hitch. A Class I hitch has the hitch pin hole recessed further back in the receiver than a Class II hitch would be. Draw-Tite and Hidden Hitch punch or weld a stop into the receiver so a Class II rated accessory can't be slid into the receiver far...
    view full answer...
    Image 1 for
  • Can I Tow a Malone MicroSport Trailer with a Nissan Altima
    What that means is that the Malone MicroSport trailer, part # MPG460G, is level when the bottom of the coupler is 18 inches off the ground. To tow the trailer level you need a ball mount with a rise. Park your Nissan Altima on level ground and measure from the ground the inner top of the receiver hitch. When we installed the Draw-Tite hitch on an Altima we measured 10-1/4 inches. You'll likely be close to this but measure your car so you're sure. Then subtract your measurement from...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch Recommendation for a 2014 Nissan Maxima
    It looks like you are going to be drilling no matter which hitch you use. The Curt hitch, # C11352, attaches more to the frame which is why it requires removal of the heat shields. The hitch itself will act as a heat shield to dissipate heat. The Draw-Tite hitch # 24796 does mount to the sturdier part of the spare tire well which requires drilling (which will be pretty easy to drill through, unlike a solid frame) but retains the heat shields. I have linked videos showing installations...
    view full answer...
  • Do I Need To Remove Exhaust Heat Shields To Install CURT Trailer Hitch # 11352 On 2010 Nissan Altima
    I do have some hitch options available for your 2010 Nissan Altima that do not require the removal of the heat shields, but the CURT trailer hitch # 11352, does require the heat shields to be removed. The Draw-Tite hitch # 24796 will allow you to retain the heat shields on your 2010 Nissan Altima. It is a Class I 1-1/4 model, and is has the same tongue weight and towing capacity of the CURT hitch # 11352 that you selected. To complete your towing setup, you will need the following items: A...
    view full answer...
  • Can Trailer Hitch Installed on 2013 Nissan Altima Handle Mobility Scooter + Carrier Weighing 300 lbs
    A Nissan Altima is compatible with a Class I hitch, which has a maximum tongue weight capacity of 200 lbs. The 300 lb chair and lift you mention would seriously overload the hitch, which would damage the hitch and result in the loss of the carrier and the power chair during transport, which would be bad. Your best bet would be to use a different tow vehicle, one that's capable of using a Class III hitch that has a tongue weight capacity of at least 350 lbs. A small trailer like part #...
    view full answer...
  • Tongue Weight and Towing Capacity of 2013 Nissan Maxima
    According to the online owner's manual for your 2013 Nissan Maxima the vehicle's tongue weight (TW) rating is 100-lbs and it's maximum towing capacity (GTW) is 1000-lbs. You can check your own printed manual to see if there is different information for your car provided by Nissan. The hitches offered for your car are all light-duty Class I types that can be viewed on the linked page. All share a 200-lb/2000-lb rating but since your car is rated lower, you need to abide by that lower rating...
    view full answer...
  • Wiring a 2007 Nissan Sentra
    You will need the T-One Connector w/Upgraded Circuit Protected ModuLite, part # 118470, to wire your 2007 Nissan Sentra for towing. The harness has a modulite built in that draws power for the trailer tail lights and protects the sensitive circuitry on the vehicle. The wire and inline fuse are included for connection to the vehicle battery. You could also use the # C59496 for your vehicle. The only difference is that you will have to splice into the vehicle wiring for installation rather...
    view full answer...
  • Maximum Tongue Weight for 2011 Nissan Maxima
    I believe you are asking about the maximum tongue weight for your 2011 Nissan Maxima and according to the owner's manual it has a maximum tongue weight of 100 lbs and maximum towing capacity of 1,000 lbs. This would be the max even though the trailer hitches available for your '11 Maxima such as the Curt # C11352 have a capacity of 2,000 lbs for towing and 200 lbs tongue weight; you always need to go by the lowest-rated component, which in this case is your vehicle. You will be able...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring for a 2008 Nissan Altima Sedan
    All of the trailer hitches available for the 2008 Nissan Altima require drilling for installation. The hitches are all custom the issue is that there aren't any holes in the vehicle frame to mount a hitch so drilling is required. If you want to go ahead and install a hitch you can use Draw-Tite hitch # 24796. I have linked a video showing an example installation. For a ball mount use # 3594. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. For trailer wiring you can...
    view full answer...
  • Trailer Hitch Receiver Fit For 2011 Nissan Altima Sedan
    We do have a fit for your 2011 Nissan Altima sedan; I checked with the manufacturer and can confirm that the correct fit is the Curt Trailer Hitch Receiver # C11352. I have added a photo a customer sent in of this hitch installed on his Altima with a double exhaust as well so you can see how it will look on yours. If you plan on doing some light towing with your Altima you will also need the T-One Vehicle Wiring Harness # 118470, Curt Drawbar # C45521, Pin and Clip # F-4, and 1-7/8" Hitch...
    view full answer...
    Image 1 for
  • Available Hitches and Towing Capacity for 2009 Nissan Maxima
    The Hidden Hitch # 60873 (no longer available) and the Draw-Tite # 24796 are identical. They are both manufactured by the same parent company, Cequent Performance Products. Their weight bearing capabilities and installation procedure are identical. For towing, you would also need a ball mount, trailer connector, part # 118470 and a 1-7/8 inch ( # 19256) or 2 inch ( # 19258) trailer ball. According to my research, the 2009 Maxima has a rather modest 1000 lb towing/100 lb tongue weight capacity....
    view full answer...
  • Can a 2 Inch Ball be Used on a Class I Trailer Hitch for a 2008 Nissan Sentra
    You can use a 2 inch ball with a Class I trailer hitch. The ball shank has to have the proper dimensions to fit the correct ball mount for the hitch. On Draw-Tite trailer hitch # 24794, the correct ball mount is # 3594 and for a 2 inch ball you would use # 19258. Even though this ball is rated for 3,500 pounds, you are still limited by the capacity of the hitch (2,000 pounds) or the vehicle (check owners manual) whichever is lower. You will also need pin and clip # PC2. On a Class I hitch...
    view full answer...
  • Recommendation for Towing a Waverunner with a 2014 Nissan Altima
    Sounds like you are wanting to tow a waverunner with your 2014 Nissan Altima, it would greatly depend on what the weight of the trailer ends up being and any limitations of your vehicle. I recommend consulting your owner's manual or Nissan about any limitations your vehicle may have. If you have the towing capacity, then we have all the parts you will need right here. I recommend the Curt Class I hitch # C11352, because it has a towing weight of 2,000lbs and 200lbs of tongue weight....
    view full answer...
  • Removing the Mufflers on a 2011 Nissan Altima for Trailer Hitch Installation
    When installing the Draw-Tite Trailer Hitch # 24796 on a 2011 Nissan Altima, you will still need to temporarily remove that portion of the exhaust as indicated in the instructions. With the band clamp instead of a flange, you will just re-install the same parts that came with the clamp when you removed it. No sealant or gasket will be required. I have included a link to the installation details and a video showing a typical installation for you. In the video, the 2010 Altima actually...
    view full answer...
  • Trailer Hitch and Wiring for a 2012 Nissan Sentra
    Draw-Tite trailer hitch # 24794 is designed to fit the 2007 to 2012 Nissan Sentra including SE-R models so it will fit your 2012 model. I have included a link to a video showing an example installation of this hitch for you. If you plan on doing some towing the correct ball mount is # 3594. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. And for trailer wiring use # 118470. I have linked a video showing installation of the wiring as well. If you want to use the hitch for...
    view full answer...
  • 2013 Nissan Altima 4 Door Sedan Hitch Recommendation
    The Draw Tite Hitch part # 24796 would be an excellent choice as a hitch for your 2013 Nissan Altima. There will be a little bit of drilling required, but the heat shield will not need to be removed. Check out the install video I attached for this hitch. To complete your towing setup you may also be interested in the following: Ball mount # 3594 1-7/8 inch ball # 19256 2 inch ball # 19258 Trailer Wiring Harness part # 118470
    view full answer...
  • Tongue Weight and Towing Capacity of Draw-Tite Class I Receiver Part # 24794
    The folks at Draw-Tite assure me that the Class I receiver you mention, part # 24794 is rated at 200 lb tongue weight/ 2000 lbs towing. This has been confirmed through extensive testing. You will want to check your owners manual to determine the actual towing capacity of the vehicle, and abide by whichever figure is lower. If you were planning on using the hitch for towing a small utility trailer, you might also need the following: A ball mount Wiring harness with 4-pole trailer connector,...
    view full answer...
  • Derale 8000 Series Transmission Cooler Part # D13501 for 2008 Nissan Altima
    The hitch itself will provide no problems. It will pull up to 2000 lbs all day long with no issue. Since you are going to be traveling in a hilly area, I would strongly suggest installing a transmission cooler to protect your transmission. The Derale Series 8000 Plate-Fin Transmission Cooler, part # D13501 would be a great choice. The cooler is cheap insurance for your transmission. The installation is fairly straightforward, we have an installation video showing a similar cooler being...
    view full answer...
  • Trailer Wiring Recommendation for a 2010 Nissan Altima Sedan
    Both wiring harnesses for the 2010 Nissan Altima Sedan require a power wire ran to the battery and an in line fuse installed. It is absolutely necessary and the trailer wiring will not work without it. More and more cars are being made with thin wiring that is not capable of handling the added power draw of trailer lights. The powered converters virtually eliminate the power draw from the vehicle wiring protecting it and other electrical components from damage. Both wiring harnesses install...
    view full answer...
  • Does the Muffler have to be Removed to Install a Trailer Hitch on a 2013 Nissan Altima Sedan
    All of the trailer hitches for a 2013 Nissan Altima Sedan do require temporary removal of the muffler in order to complete the installation. The most popular hitch option for the vehicle is Draw-Tite trailer hitch # 24796 that you have referenced. I have included a link to a video showing a typical installation and a link to the installation instructions for you. If you plan on doing some towing first consult the vehicle owners manual for the vehicles capacities. For a ball mount use #...
    view full answer...
  • Can the Power Wire for Trailer Wiring Harness 118470 Go Through the Firewall on a 2012 Nissan Altima
    Like the review states, that grommet should be there. Otherwise you will need to continue looking for a place to drill or route the wire underneath the vehicle. We have an informational FAQ I wrote that should help a little. It does not cover any specific vehicles but it does give you options for routing the wire. It is possible that there are other factory entry points through the firewall. The issue is that the wire bundles going through them may be so tightly packed that getting an...
    view full answer...
  • Is Drilling or Modification Needed to Install a Trailer Hitch on a 2013 Nissan Altima Sedan
    Drilling is required to install the Draw-Tite trailer hitch # 24801 for the 2013 Nissan Altima Sedan. Since you are leasing the vehicle, I do not recommend making modifications to the vehicle unless the dealer leasing the vehicle determines it is ok to do so. I have linked the instructions that you can show the dealer to help make that decision. If you get the go ahead to install the trailer hitch then if you are planning on doing any towing you will also need a ball mount, and wiring...
    view full answer...
  • Trailer Hitch Recommendation for a 2013 Nissan Altima
    It is not uncommon for a hitch to fit multiple vehicles. This is the case with Curt trailer hitch # C11352. It does indeed fit the Nissan Maxima and Altima sedan. I have included a link to the installation instructions for you. If you plan on doing some towing with the hitch I recommend going with the ball mount # C45521 and pin and clip # F-4. Then you would just need a ball like # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch diameter. For trailer wiring use # 118470. I've...
    view full answer...


< Previous
12



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Brandon M
Expert Research:
Brandon M
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<