T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
This item does not fit your vehicle
2016 Ford Transit Connect
These items fit your vehicle
2016 Ford Transit Connect
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Circuit-Protected Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
This converter safeguards itself and your vehicle against possible electrical shorts and overloads with integrated short circuit protection. Just install the connector as indicated and rest assured that the wiring system of your vehicle will remain feedback-free.
California residents: click here
No brainer to install
Easy to install. Works great.
easy install works good
Great service
Worked perfectly for my Toyota Matrix 2007.
Excellent product, easy tio install works great.
Easy install and great product, would work with etrailer.com again for sure
got it delivered yesterday, as scheduled. installed this
morning. instructions were very good and it went well..
happy with the product and service.
made for my car,so it fit good.
The hitch and electric connector went in perfect. The instructions were great as well as your video. The "Tow Ready" wiring harness is far superior to the last one you sent to me.
Ordered hitch and wiring harness connector. Being old fashioned I called instead of my first order being on the internet. Talked with Rose and was treated like royalty. Very knowledgeable and accommodating! Order was delivered very quickly as placed. Installation went well. A satisfied customer.
I bought this as replacement for the U-Haul installed wiring harness that never worked quite right. This unit is much more substantial, has higher quality connectors, and was a cinch to install. I should have gotten this one the first time around.
This is a very high-quality product. The connectors on the wiring mated with the factory connectors perfectly. Everything was solidly constructed, and the plug cover is a nice touch. I chose not to drill the hole for the ground wire. Instead I used a stud through the body panel that was near the left tail light (probably holding the light cluster on). Just a few turns with a 10 mm wrench and I was done. Highly recommended.
I purchased the "T-One" wiring harness for my 2007 Toyotal Matrix. I must admit that I was not 100% sure the harness would be as simple to install as etrailer described. WOW! was I wrong.... It took me longer to clear the trunk out and open the box than it took to install the harness. It took me less than 5 minutes to install. The only thing is I wish the lead to the trailer was a little longer. However, I am 100% satisfied. Highley recomended product and will shop etriler again.
The T-One Wiring Harness for my 2005 Toyota Matrix was extremely simple to install. I think it took me all of 10 minutes. The etrailer staff was incredibly helpful from the moment I ordered. The only advice I have that was not included in the instructions for the wiring harness is to run the trailer wire through the floor, underneath the spare tire. I believe the instructions show the harness simply coming out of the hatch and then the hatch closing on the wiring. I found round, black gaskets underneath the spare that can be removed and allow access to run the trailer wire to the hitch. This lends a cleaner look. Thank you etrailer staff.
I like: actual trailer hitch is good; goood welds, nice paint. But the bolts you sent don't fit my Matrix. The car, a 2003 Matrix, was built in Canada and my have "standard" welded nuts in the frame (????). At any rate the bolts don't fit. I am not sure what to do. The next size down is too small, and we may have to re-tap the frame to install it.I give it an average instead of poor because the wiring kit was good; it had good instructions and plugged right in.
Easier to install than I though 2006 Toyota Matrix XR.
Didn't have to jack it up to install.
Also installed the T-One wiring harness only tool needed is a drill with a Philips #2.
Had to remove the lower trim in the back but it looks like it won't be missed. bolts for it are 10mm.
No tools needed to get to the car wiring
The T-One wiring harness only tool needed is a drill with a Philips #2 for the ground screw
Easy to install with clear instructions. Did not even have to drill a hole for the ground, just attached it to a screw from the headlights that went through the metal.
2006 Toyota Matrix XR
The wiring harness was an easy direct fit, install. Tucked the remaining harness in the spare tire well. Used it many times and have had no issues.
Goody
9/5/2018
Thanks for the follow up, George. Both the receiver hitch and wiring have been working great! I am very happy with my purchases. Thanks.
Worked as advertised.
Installation instructions were understandable and easily followed.
I have ordered and installed a hitch and 2 different harness systems from etrailer.com for similar vehicles. The hitch fit both, but I needed different wiring harnesses. I've had no problems with either of the wiring harnesses nor the hitch for that matter.
This was the easiest trailer wiring set up I've ever seen. It was specific to my car, so the connecting was just a matter of unplugging the existing wiring and inserting the adapters. Couldn't be simpler.
Fits perfectly and shipped fast. Now I can haul my CR250R with a Matrix!
the wiring was easy to put on took about 10 min. To put on the trailer hitch I went to the auto store and bought a tap to clean the thirds out that took the longest . after that the hitch bolted up just fine.If you are going to put a trailer hitch on a 2004 Toyota matrix clean the thirds out first it make it easer to do.
All is well couldn’t be happier w/hitch and wiring harness! Easy to install and have told others of your products.
The wiring harness shipped and was received right on time. The harness itself was to replace an earlier etrailer harness installed 8 years ago. The newer harness had clearer directions and took only a few minutes to install.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark S.
2/25/2015
Wiring harness still works. Used it many, many times and still no failures. Great product. I recommend etrailer over UHaul any day.Note: I attached it to a screw from the brake light housing, not the headlight.