To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.
Features:
The upper factory overload springs on your truck are designed to help compensate for a large payload. When you are hauling a heavy load, your truck's standard leaf springs can't always counteract the weight of it. As a result, if you hit a bump when your suspension is fully loaded, the leaf springs will give and cause your truck to bottom out. The overload springs help keep this from happening by mounting above the leaf springs to provide initial points of contact for your vehicle's frame, thus removing some of the load from the standard springs.
These StableLoads are designed to replace the factory bump stop pads that are mounted to your truck's frame. The factory pads are typically quite small and will not contact the overload springs unless your truck is dramatically sagging. By replacing these small pads with the much larger StableLoads, you can fill the gap between your upper overload springs and your frame-mounted bump stop bracket. This pre-activates the overload springs, ensuring that they are engaged from the start instead of engaging only when extreme sagging occurs.
By enhancing your upper overload springs in the way described above, you will notice less sway and body roll. This is due to the pre-loading effect of the StableLoads, which helps to better distribute the weight of your payload over the entirety of your factory suspension. This is the primary difference between StableLoads and many air bag overload systems.
With air bag suspension enhancement, the load in your truck is being taken on by the air bags. Air bags are designed to level your truck, and they operate as intended when they're under a normal load. But if you are hauling or towing a particularly heavy load, this type of suspension enhancement can create some problems. In order to get the correct amount of leveling and to ensure that your suspension won't bottom out, you will likely have to fill the air bags to a very high psi. Doing this effectively removes the load from your factory suspension. As a result, your truck's suspension is no longer able to operate as it was designed. This can lead to handling issues, such as porpoising, sway, or body roll.
If you currently have this problem with your air bag system, you can add StableLoads to your suspension and get the best out of both products. StableLoads are effective on their own, but they've also been tested with aftermarket air bag suspension systems. The two enhancements work particularly well together if you have a heavy payload. By installing StableLoads between your upper overload springs and your truck's frame, you are already adding support to your suspension to help prevent bottoming out, which air bags work to prevent as well. As a result, you won't have to fill the bags nearly as full, which means that they won't take as much of the load off of your factory suspension, thus allowing your suspension to function as designed - only better.
Tested and Proven Winner
TorkLift's StableLoads were tested against vehicles with no suspension enhancement and vehicles with air bags that were inflated to 100 lbs; and the results are clear. By adding StableLoads to your suspension your vehicle will ride smoother, causing less wear and tear on your suspension and tires. The trucks that were tested were loaded with 2,800 lbs. The degree of movement was then recorded, using an inclinometer, when the trucks encountered the 3 most common types of handling problems: side-to-side sway, porpoising, and body roll.
Side-to-side sway is triggered when your vehicle encounters uneven ground, such as a pot hole, and the suspension gives way when it cannot counteract the weight of the heavy load being carried. This creates a side-to-side bouncing motion. As you can see in the graph above, air bags provide an advantage over no suspension upgrades. But the StableLoads offer dramatic improvement over both the standard suspension and the air bag suspension.
Porpoising is the rising and falling action your vehicle makes when driving over an object like a speed bump. Having too much bounce can make you feel like you're riding in the back of a school bus. As you can see in the graph, there is virtually no difference in porpoising between trucks with standard suspension systems and those with air bags. Only the StableLoad offers improvement for this type of problem.
Body roll occurs when your heavy load transfers unevenly as you navigate a turn, causing one side of your vehicle to lean dramatically. In some cases this can lead to your truck's tires coming off of the ground and it could even cause your vehicle to roll over if it is too top heavy. Again, according to the graph above, air bags offer no help with this problem. It is only with the StableLoads that stability improves.
Only because i haven't installed yet , but they seem high quality
Excellent product, excellent company to do business with
Great product. Works as advertised. Easy to install.
Great concept but did give the truck a little bit rougher ride
WE had to get this exchanged as they sent the wrong bracket. But it didn't take long to get it resolved. Good Job. works great.
Really helps with the sway when off the vehicle
Work as advertised
Another smooth purchase.
Product is good but had to cut the tabs off the pads for installation. Most people would not have the tools to do that.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.