bing tracking image
  1. Vehicle Heaters
  2. Zerostart
  3. Engine Block Heater
  4. Threaded Immersion
  5. 120 Volts
  6. 1000 Watts and Up
Zerostart Engine Block Heater for John Deere Industrial and Ag Engines - 1-5/8" THUD - 1,000W
Zerostart

Zerostart Engine Block Heater for John Deere Industrial and Ag Engines - 1-5/8" THUD - 1,000W

Part Number: ZE94YR
In Stock
$160.77
Vehicle Heaters
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Your John Deere tractor or industrial engine still has a job to do after a freezing night. This 1,000W heater warms engine coolant before startup, reducing cold-start strain so you can get to work. Great Prices for the best vehicle heaters from Zerostart. Zerostart Engine Block Heater for John Deere Industrial and Ag Engines - 1-5/8" THUD - 1,000W part number ZE94YR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2)
  • Q & A (0)
  • Videos (2)
  • Photos

Zerostart Vehicle Heaters - ZE94YR

  • Engine Block Heater
  • Threaded Immersion
  • 120 Volts
  • Zerostart
  • 1000 Watts and Up

Your John Deere tractor or industrial engine still has a job to do after a freezing night. This 1,000W heater warms engine coolant before startup, reducing cold-start strain so you can get to work.


Highlights

  • Get Working on Cold Mornings: Preheats coolant before starting a tractor or industrial machine.
  • Fits Specified John Deere Engines: For listed Series 300 and Series 400 industrial and tractor applications.
  • 1-5/8" THUD Threaded Connection: Replaces the large plug on the left side of a compatible engine.
  • Warm Coolant Directly: 1,000W immersion element transfers heat through the coolant before startup.
  • Replace the Cord Separately: Removable 6' silicone cord can be changed without replacing the heater.

Features to know about

Get Your John Deere Engine Ready for Work

There's work waiting, even when the temperature drops below freezing. Maybe you're starting a tractor to feed livestock, getting farm equipment ready for the morning, or firing up an industrial generator before the crew arrives. An engine that has been sitting outside all night can be harder to start. This 1,000-watt Zerostart heater warms the coolant before startup, reducing cold-start strain and helping the engine reach operating temperature sooner. It's a practical way to prepare the equipment you count on when winter weather moves in.

Match the Heater to Your John Deere Engine

John Deere engines are used in more than tractors. You'll also find them in agricultural machinery and industrial equipment, so it's important to identify the engine rather than relying on the machine type alone. This heater fits specified John Deere Series 300 and Series 400 engines, including the 4039, 4045, 6068, 6076, and 6466, among others. It's also listed for qualifying John Deere tractors manufactured in 1977 or later that have the large hex plug on the side of the engine.


Not every John Deere engine uses the same heater, even when the threaded opening looks similar. Some engine configurations require a heater installed on the opposite side of the block. Before ordering, check your engine identification and confirm the correct heater and installation location using the manufacturer's application chart. The specific installation location can be found in the catalog linked below (see instruction link A).

Warm Coolant Directly Through the Threaded Opening

This is a threaded coolant-immersion heater, not a dry cartridge or press-in freeze-plug heater. It replaces the designated 1-5/8" threaded hex plug on the left side of a compatible engine. The heating element sits directly in the coolant, transferring heat into the engine's cooling system before startup. As the coolant warms, natural convection helps distribute that heat through the cooling passages.


Installation requires draining enough coolant to remove the existing plug and fit the heater. For applicable tractor installations, Phillips & Temro specifies positioning the heating element upward. Follow the instructions for your engine, including the proper element orientation, sealing method, and tightening specifications. Refill the cooling system and remove trapped air before connecting power.

Keep the Power Connection Accessible

You don't want to reach deep into an engine compartment every time your tractor or machine needs to be plugged in. The included 6' silicone power cord can be routed to an accessible location on your equipment. Secure it away from exhaust components, sharp edges, and moving parts, leaving enough slack for normal engine movement.

The cord is removable, so a damaged electrical connection doesn't mean replacing the entire heater. The compatible replacement is the Zerostart 6' replacement power cord (ZE99SR) , manufacturer part 3600008. It uses the matching Type K connection.

Know Who Makes Your Zerostart Heater

Zerostart is a Phillips & Temro brand. You may already recognize Phillips & Temro from engine-heating products supplied for original-equipment and aftermarket applications, even if the Zerostart name is less familiar. The company develops heaters for agricultural, industrial, and heavy-duty engines. That background is useful when you're maintaining working equipment and need a heater with the correct engine fit, threaded connection, and electrical rating.

Important Notes:

1. Coolant and Installation

Allow the engine and coolant to cool completely before installation. Follow the engine manufacturer's instructions for draining and refilling the cooling system. Phillips & Temro recommends a 50/50 mixture of antifreeze and water. Do not use straight antifreeze or a mixture exceeding 65 percent antifreeze, as this can cause premature heater failure. Avoid coolant containing stop-leak additives.

2. Threaded Connection and Heater Placement

This heater uses a 1-5/8" THUD threaded connection and replaces the designated large hex plug on the left side of compatible engines. Confirm your exact engine application before installation. The connection is not interchangeable with an NPT fitting simply because the nominal size looks similar. Follow the instructions for correct element orientation, sealing, and tightening. Do not over-tighten the heater. If an O-ring is specified, avoid petroleum-based lubricants and use antifreeze as directed.

3. Testing Your Heater

Do not plug in the heater before installation to see if it works. The heating element must be fully immersed in coolant before electrical power is applied. Operating it in open air can cause damage or serious burns. To test electrical resistance, disconnect the heater from power and use a multimeter according to the manufacturer's instructions. General Zerostart testing guidance specifies a resistance reading between 5 and 100 ohms.

4. Using Your Heater Safely

Refill the cooling system and remove trapped air before connecting power. Use a properly grounded 120V outlet and a power cord or extension cord rated for the electrical load and operating environment. Keep wiring away from hot surfaces and moving parts. Always unplug the heater before starting the engine. When disconnecting power, grasp the plugs rather than pulling on the cords.

Specs

Compatible Engines:

  • John Deere Series 300:
    • 3164
    • 4039
    • 4045
    • 4219
    • 4239
    • 4276
    • 6329
    • 6359
    • 6414
    • 6059
    • 6068
  • John Deere Series 400:
    • 6076
    • 6081
    • 6101
    • 6414
    • 6466
    • 6619
  • Qualifying John Deere tractors manufactured in 1977 or later with a large threaded hex plug on the side of the engine

Installation and Construction:

  • Heater type: threaded coolant immersion
  • Threaded connection: 1-5/8" THUD
  • Installation location: designated threaded plug on left side of engine
  • Heating element orientation: upward for specified tractor applications
  • Heating medium: engine coolant
  • Manufacturer part number: 3500029

Electrical and Power Cord:

  • Voltage: 120V
  • Wattage: 1,000W
  • Included cord length: 6'
  • Cord material: silicone
  • Connector type: Type K
  • Replacement cord: Zerostart 3600008 (ZE99SR), sold separately

Warranty & Certification:

  • 1-Year limited
  • CSA certified


3500029 Zero Start Engine Heater - 120V - 1000W - John Deere 300 - John Deere 400 - 1-5/8" THUD - Diesel

Installation Details ZE94YR Installation instructionsAlternate Instructions ZE94YR Installation instructions



Video of Zerostart Engine Block Heater for John Deere Industrial and Ag Engines - 1-5/8" THUD - 1,000W
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Zerostart Vehicle Heaters - Engine Block Heater John Deere Industrial Tractor - ZE94YR

Hi everybody. Andy here with etrailer.com. Let's take a quick look at the zero start engine block heater for your John Deere industrial and tractor engines. Now on your screen, I am putting a list of all the compatible engines. As you can see, this is going to work with your John Deere Series 300, Series 400, and then your John Deere tractors manufactured 1977 and later, featuring a large hex plug on the side of the engine. Now, if you're not sure which engine you have, look for the metal data plate or sticker on the side of the engine block near the valve cover.

That engine serial number or ESN is 13 or 17 characters long with the first two letters showing the factory and the next four numbers identifying the model. And you can match that number against the compatible engines listed on the screen there that you see there to confirm your fit. We do have this information available for you on this product page if you need to refer back to it. But when the temperature drops, the last thing you need to worry about is your equipment giving you trouble. This custom fit block heater is built to keep your John Deere engine ready to roll even on those coldest mornings.

By warming up your engine's coolant, this is going to help oil and diesel stay fluid so your machine fires up fast and gets straight to work instead of idling and straining. So you can say goodbye to slow cranks and long warmups with 1,000 watts of heating power at 120 volts. This heater is going to keep your coolant warm and your start smooth even in freezing conditions. So this is not just about convenience, reducing the stress of cold starts is also going to help extend your engine's life as well. Now, unlike universal heaters that often require modifications, this one is made specifically for those John Deere engines that we talked about.

This is going to replace the threaded plug on the left side of the engine. So that's going to be the ideal spot for even heat distribution. And installation would be pretty simple and straightforward with no guesswork or extra tools required. This durable, removable six-foot silicone cord is going to stand up to heavy use and harsh weather. And then when you're done, you can easily detach this for storage or replacement, a small touch that adds a big convenience.

And this has a 1 5/8-inch threaded unified diameter or THUD. Now if you have any other questions about this heater or anything else that we carry here at etrailer.com, don't hesitate to reach back out to us. We want to make sure that you're getting exactly what you want and need. Well, again, my name is Andy. Thank you for joining me.

Ratings & Reviews

5.0

2 reviews
5 Stars
(2)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
by:
2
2
true

See what our Experts say about this Zerostart Vehicle Heaters


Info for this part was:

Employee Mary K
Edited by:
Mary K
Employee Daron K
Updated by:
Daron K
Employee Dawn Z
Updated by:
Dawn Z
Employee Alex H
Written by:
Alex H
Employee John S
Video Edited:
John S
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.