To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Airflow makes a big difference inside your ProMaster. This half-slider window replaces the solid rear cargo door panel with a tinted opening that lets fresh air and natural light into your van while maintaining a clean factory-style appearance.
This sliding window replaces the solid panel section in your Ram ProMaster's passenger-side rear cargo door. Instead of a sealed panel, one portion of the glass slides open to create ventilation at the back of the van. When you're parked, camping, or working out of your van, that opening helps move fresh air through the interior instead of leaving the rear door completely closed off.
The rear cargo doors are one of the most visible areas of the van from the outside. Pure Grey Solar Privacy Glass helps reduce glare and heat buildup while blocking 83% of UV rays. The tinted glass also adds privacy and gives your ProMaster a clean, factory-style appearance.
This window uses tempered safety glass that meets DOT and SAE requirements. The durable construction is designed for automotive use and provides the strength needed for daily driving and long-term service.
Cutting into a ProMaster panel is permanent. The window frame is designed to follow the factory rear cargo door contour so it integrates cleanly with the vehicle. Once installed, the window provides an OEM-style appearance that looks like it belongs on the van.
Installation uses automotive urethane to bond the window to the vehicle and create the primary weather seal. Once the opening is prepared and the urethane is applied, the window is set into place to create a secure, leak-resistant installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer. Let's take a quick look together at this Van Windows Direct SE Series sliding van window for your passenger side rear cargo door. Now this has been designed to fit your 2014 to current Ram ProMaster 1500, 2500 and 3500. And on custom fit parts such as this window, I do recommend taking advantage of our vehicle fit guide here at etrailer. Hop in the year, make and model of your vehicle and our fit guide will confirm if this will work for you or if we have something comparable that will work for you.
And because it's this custom fit, it is very important that you do go through our fit guide before ordering this. Now this rear door window is designed specifically, as we mentioned, to fit that factory opening on your ProMaster. So this is going to give you a clean OE style fit rather than looking like an aftermarket add-on. And the half slider design is going to let you open part of the window whenever you want for that extra airflow through the van. And then it's going to close just as easy and then latch into place.
The glass itself is pure gray solar privacy glass. So you can see when I'm behind here, it's kind of hard to see me through here. So you're going to get quite a bit of privacy here. It's going to block out about 83% of UV rays to help cut down on heat and glare, but also giving you additional privacy. So I'm really impressed by that level of tint that you're going to get from this.
This is made from tempered safety glass. It's going to meet DOT and SAE standards. So it's built with automotive safety and durability in mind. I'm going to see if I can carefully turn this around here, line this back up here and try to give you just a demonstration here. So I don't carefully, not to drop this glass and break it while we're on the camera here.
But as you can see, this is going to be very easy to close, latches shut and then open. You've got your screen there, so it's going to keep out insects and the like. Now insulation is going to be similar to a factory style automotive window. This is going to bond directly into the rear door opening using automotive urethane. So that's going to give you a primary weather seal. I do want to pop up a graphic here for you. On your screen, I'm showing you some of the items that you are going to need to get this installed correctly. This is a smaller window, so you're probably going to be fine with the urethane for small windows. You see the part number there. It's probably a good idea to pick up some securing tape as well. So if you don't already have those items there, again, I have them listed there for you with the appropriate part numbers. Once installed, you're going to get the benefit of ventilation and privacy while maintaining that clean appearance. It's going to compliment that ProMasters factory exterior. Now, speaking of insulation, if you're not too excited about doing the installation on your own, that's okay because on this product page underneath the photo section, we have a link that will take you to our installer locator. Click that link, answer the questions that it has for you, and that locator will find an installer in your area that etrailer has partnered with to help you with the install. Well, I think that's going to wrap up our look today. Again, my name's Andy. Thank you for joining me.
Ratings & Reviews
These windows are exactly as ordered and were shipped promptly and FREE shipping. Very impressed with service and ease of ordering.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.