InfiniteRule Trailer Coupler Lock Kit for 2" Demco A-60 Couplers

Video Transcript for Review of InfiniteRule Trailer Tongue Lock - Trailer Coupler Lock Kit 2 Inch Demco A60 - IR77RR

Hi, everybody, Andy here with etrailer. Let's take a quick look at this InfiniteRule trailer coupler lock kit for your two-inch Demco A-60 couplers. Now, this trailer coupler lock set is designed to keep your trailer safe and secure when it's not hitched up or when it's locked to your tow vehicle. So this main coupler here is going to work with your Demco A-60 2-inch ball couplers as well as a trailer tongue that is up to 4.5 inches wide. As you can see here, we do have multiple locking positions, so you're gonna be able to adapt this easily to different coupler shapes and latch styles. We do have a lock protector here that's included, and I'll demonstrate that for you right now actually.

So again, this is going to work with your two-inch ball. Now, this lock here is basically a universal lock, but this kit put together is designed specifically for that two-inch Demco A-60 coupler. So the way that this adapter is set right now, this will work with a 2 5/16-inch ball coupler. So you'll want to take that top portion off. And now, in this configuration, it'll work with either a two-inch or 1 7/8-inch ball coupler.

So you'll just put this into that coupler and couple it to this adapter. And then you'll take this top shackle and you'll put that over your coupler. And then you are going to want to find the tightest fit for this to be securely around that coupler so that latch can't be lifted up. And then once you find that secure fit, you're going to take this lock and then you're going to find the best set, the matching set of holes that's going to work with that tight fit that you have selected and run that all the way through. And let me look here and see if I'm lining up here.

Obviously, this will work a lot easier when this is on your trailer coupler. And so I have that run all the way through. And then, I mentioned this lock protector here. You're just going to put the head of the lock here into the protector, like so. And as you can see, there's cutouts here for that cap.

And then, you're going to connect the ends here of the lock. And then, I'm gonna take one of the keys here. Everything is key to like. One key will run the show. Insert the key, and then I am going to turn this clockwise like I'm tightening down a bolt. And then, once it's tight, then to remove the keys, I want to line up to the nearest set of hatch marks around that key ring and let me see if I can show that to you. So we have hash marks in strategic points around that ring. You'll line the key up to the nearest set, whether you gotta back off a little bit and move it a little bit forward. That'll allow you to remove the key, you'll replace the cap, and then this is what it's going to look like on your coupler. So you can see where this hard piece of rubber's gonna protect that lock. And then to unlock it, you'll just reverse that process, like you're loosening a bolt, and then you'll be able to pull those locks apart. So obviously, this is in a bright orange color and that really acts as a visual deterrent as well to would be thieves or walking through, looking for trailers to steal. If they see this bright orange thing, they're gonna know immediately that this is locked. So they're gonna move on to an easier target, if you will. So this is built from heavy duty stainless steel. All the components are here, so you're gonna have long lasting corrosion resistance. And then of course, every lock has these rug-tethered, rubber proof, weatherproof, rather, rubber caps that are going to keep that keyway safe and protected. And all the locks are gonna work the same way as I demonstrated with this one here. I did not mention, but you can adjust this ball to, if this isn't like the best fit for that coupler, it can be adjusted. So this is again, universal in nature so you can get that best fit that's going to work specifically for you. This also includes this flush-style coupler latch lock that's going to secure the trigger latch of your trailer's coupler. So when the trailer is locked onto your tow vehicle, it can't be removed from that ball. And that latch lock pin length is right at 3 1/8 inches. And I'm throwing a photo up there on your screen, showing you what this complete setup is gonna look like when this is in action since I don't have that coupler here in my studio. So I thought the next best thing would be to show you a photo of this in action. And then the flush-style hitch lock is included as well. That's going to secure your ball mount or other hitch accessories to your two or 2.5-inch trailer hitch receiver. So as I mentioned, six keys, everything's key to like, so you can have some keys for backup. Give one or two keys to friends or family that need access to unlocking your trailer or what have you. And if you happen to have any other questions, whether it's about this set or anything else that we carry here at etrailer, don't hesitate to reach out to us because ultimately we wanna make sure that you're getting exactly what you need. Well again, my name is Andy. Thank you for joining me.