Trailer Reflector - Adhesive Backing - Rectangle - Red - 4-5/16" x 1-11/16"

Video Transcript for Review of Peterson Trailer Lights - Reflectors - PE44WR

Micheal: Hi there, I'm Michael with etrailer.com. Today, we're going to take a quick look at this red trailer reflector. This is a very thin piece of material with adhesive backing. So it's going to be very easy to get put in place in my mind. It's kind of like a sticker, just it's very thin and malleable, and it's got that adhesive backing on there. So wherever you're going to need your reflector, it's going to go in to mount very easily in place.

As I turn it here, try and catch some of the light coming into my studio, try and demonstrate the reflective capability of it. You can see it will reflect nicely. It is made here in the USA, and it does come with a limited lifetime warranty. I do want to give you a few measurements to make sure that it's going to work for your application.So you can see this little piece here would not actually be mounted. That's just to help you get that adhesive backing off.

So I'll turn it around so it's a little less confusing for you, but it is right there about four and five sixteenths or just over four and a quarter of an inch long. And then our width, we're looking at right about 1 and 11 sixteenths or just over one and a half inches right there in between one and a half and one and three quarters inch. So not a very big piece, but it will be very easy to get mounted in place and it will add that red reflective feature to your trailer. So that's going to complete our look at the red trailer reflector again, I'm Michael with etrailer.com, thanks for watching.