Light Duty Trailer Tie Down Lashing Ring
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be reviewing part number SR10-C. This is the light-duty tie-down from Brophy rated at 1,000 pounds. It's going to provide us with a safe working load limit of 330 pounds. Now, if you need some additional support depending on the surface that you're mounting it to, we recommend backing plate, part number BP12. That's just going to add the extra support that you need for your tie-down. So the way this works is you'd just place this portion here over your D-ring, install your bolts and you'll be set to go as long as you get those fully secure. The mounting hardware is sold separately, so you will need to purchase that in addition to the D-ring.
To help assist you in that the biggest thing that you need to know is the diameter of each bolt hole. These two holes are identical and they're going to give us a diameter of 1/4". If you measure the distance from the center of one hole to the center of the other, it's going to give us a measurement of 1 1/4". The overall length of this platform is going to measure 2 1/4". The overall width is going to measure right at 1 1/4". Now, when measuring our D-ring, we're measuring the space on the inside. That's going to give us a measurement of 1 1/2".
So that's going to give us plenty of room to make our connection point. This system is covered with a zinc-plated finish so it is going to stand up well against rust and corrosion. You can see here when the D-ring is not in use you can pivot it to either side and it will lay flush so that way it doesn't take up any additional space. That's going to complete today's review of part number SR10-C. This is the Brophy light-duty trailer tie-down. .
Perfect
Do you have a question about this Tie Down Anchor?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.