Arrives before Christmas 
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. Hitch recognition memory function offers simple hookup.
Features:
Specs:
Note: Determine where these jacks will be mounted on your trailer. Use this system if there will be 20' or less between the center of the landing gear footpad and the center of the rear jack footpad. If your setup requires more than 20' between the jacks, use the 6-point Ground Control system (LC675817) instead.
Leveling your fifth-wheel RV has never been easier thanks to the Ground Control 3.0 electric leveling system. The motorized leveling legs eliminate the need for labor-intensive, manual scissor jacks. And the auto-level feature takes out the guesswork by automatically and precisely leveling your RV. Whether you use the easy-to-use touchpad or the touchscreen remote, all you have to do is step back and watch as Ground Control 3.0 levels your rig right before your eyes.
The auto-level feature provides the easiest, most efficient way to level your rig. With automatic leveling, you don't need to go through the trial and error of referencing levels and manipulating jacks one at a time. Just set the level position (zero-point) once, and the Ground Control 3.0 will bring your RV to that same preset point each time.
When first setting up the Ground Control 3.0 you will need to manually level your RV. With some leveling systems, manipulating the jacks individually can result in damage to your trailer's frame. Ground Control has built-in twist prevention so that you won't have to worry about twisting and damaging your frame.
In addition to automatically leveling your RV, the Ground Control 3.0 can also correctly position your trailer for hookup with the hitch recognition feature. This time-saving function stores your RV's position when you unhook from your tow vehicle so that it can automatically return the RV to that position when you're ready to hitch back up again.
The 4 motorized jacks included with the Ground Control system employ Hall effect technology to precisely and quickly raise and lower your RV. These jacks use sensors to measure the number of motor revolutions per minute instead of amp draw. This allows for more precise control over the motor than you'd have with conventional motorized jacks, which results in more accurate leveling of your trailer.
Manual access ports are located on the bottom and the top of each jack's motor so that the jacks can still be raised or lowered in the event of a power failure. To use these ports you must have a 3/8" drive ratchet and extension (not included). The bottom ports also require a 5/16" socket (not included).
Convenient Operation
Ground Control 3.0 offers 2 convenient ways to level your rig. Whether you use the touchpad or the touchscreen remote (sold separately), setting up camp is at your fingertips.
Touchpad with Lighted LCD Screen
The included, easy-to-use touchpad makes leveling your RV as simple as pressing a few buttons. The lighted LCD screen provides helpful prompts and alerts you to the status of the system. There are also indicator lights that let you know what functions are being performed. The touchpad is designed to mount inside of a front-most compartment of your RV. It requires a 3-3/8" wide x 2-3/4" tall cutout in the wall and it secures with the included hardware. Because the touchpad mounts inside the compartment, it will remain protected from the elements while still allowing you to be within viewing distance of your hitch.
Installation
Upgrading your rig with the Ground Control 3.0 system is simple. The 2 landing gear jacks mount to existing points on your RV and secure with included hardware. The 2 rear jacks come with mounting brackets that bolt onto 8", 10", or 12" I-beam frames with included hardware. Mounting the rear jacks does require drilling. A sensor is also included for the rear jacks. This will be mounted on a crossmember near the rear jacks.
The control module for the system mounts in a compartment under the coach with included hardware. This module has a wiring harness that connects directly to your 12-volt battery. Wiring harnesses are also included that connect the jack motors, rear sensor, and the touchpad to the control module.
California residents: click here
The system is very good!
Super quick delivery, expected it in 7-10 days and got it in 3! etrailer as always is great. Thank you.
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.