etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
(1036 reviews)
Price: $170.82
In Stock
etrailer
Add to cart
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Part Number: e98846
In Stock
$170.82
Retail:$258.63
You Save: $87.81
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1036)
- Q & A (0)
- Photos
- Used (1)
etrailer Trailer Hitch - e98846
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- etrailer
- 525 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98846 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2020 Nissan Rogue
- 2010 - 2011 Nissan Rogue excluding Krom
- 2014 - 2015 Nissan Rogue Select
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98846
Average Customer Rating: 4.8 out of 5 stars (1036 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: 06/28/2023
Quality product that appears to be well-made.
Shipping container could have been more sturdy (it busted through the box in three places).
Install instructions were simple but helpful (socket sizes to remove the tow hook bolts and install the tow hitch, extension, how to remove the plastic retainers).
Install was very easy and I didn't need to unhook the exhaust as suggested by the instructions. Only a small amount of trimming was necessary for the rock guard to fit around the hitch.
by: Robert05/26/2024
For the most part I am very happy with this wiring kit. Assembly was easy and everything fit perfectly. However, I didn’t run the hot wire (black) to the battery. That would have made the installation much more difficult. I simply spliced in a 12 volt plug. When I use the trailer I just plug it into the receptacle in the rear of the car. I attached 2 photos of my hot lead. This option works great.
by: JR10/05/2022
Installed on 2018 Rogue. Easy install. Works well for my intended purposes. I use it for storage and transportation racks. It is a little off center, but I don't use it for towing.
Jr
10/6/2023
Still holding strong after 1 years use.
Mike L.
10/21/2023
@Jr We're glad to hear that! What do you use the # e98846 hitch for?
by: Jason07/15/2024
We have put the trailer hitch to good use since we got it. Right away, we rented a large flatbed trailer from uhaul to move 4 hours to our new home. We've also rented other trailers to move furniture we purchased, appliances, etc. The trailer hitch was easy to install, very easy try put on and take off and it is extremely durable. Zero complaints!
by: Pete 06/24/2023
2016 Nissan Rogue
63 years old. I have finally found the first project in my life that actually went as easy at it should have! The accompanying videos were spot on. Ran the back end up on ramps. Secured the front wheel. No need to drop muffler. Done in less than 30 minutes. Still can’t believe it was this easy of an install.
Pete
6/25/2024
After a year of use I am happy to say the hitch is as solid today as the day I installed it!
by: Yair06/19/2024
Sturdy hitch. We connected a bike rack to it and it hold very well. We are connecting a pop camper this summer and we will see how it holds. If I don't come back here for a second review, that means I stand by my initial review.
by: Golan04/13/2023
2016 Nissan Rogue
The parts look great and fits the car perfectly. Had a test drive with a 2 bicycle rack mounted and it was perfect. The package was damaged in some areas upon delivery and some color damage was showing at 2 spots (minor). The installation video was very helpful and made the installation an easy job
Golan
4/14/2024
Working flawlessly for the past year!
Bud M.
5/13/2024
@Golan
Great to hear. Thank you for the update.
by: Yang05/09/2023
Shipping isn't the greatest. I understand that it is a 40ish pound metal, but packaging could be better. Returned the 1st one sent and got another one, but even then there was another hole in the package.
Customer service was quick to send me another one and I loved how quick it was.
Currently live in AZ so chipping in the paint doesn't matter since there isn't a big rust issue. But will be moving to WI soon and some places still use salt. Don't want rusting already.
Saw some minor paint chipped areas on the 2nd one sent. Not as bad as the first one sent.
Not sure why they used a 19mm for the new bolts. Was annoyed that the old ones was 18mm and then swapped to 19mm.
Easy installation. Forgot the name of the piece but think it was a elbow socket, so I didn't even need to waste my time taking off the exhaust.
Had some left over green spray paint so I used that to spray over the chipped areas instead of wasting $ on black paint.
Overall, not sure if I would go with etrailer again for my trailer needs. Loved how fast customer service worked to resolve my issue. Packaging needs to be better. It's a hitch receiver, a piece of metal... not much to say about it except I hope the ugly spray job prevents rust! I mean it will rust eventually, just don't want the life span of it to be less.
by: Ed K03/25/2024
My overall assessment of the product is that it meets the basic requirements, but there are some notable issues with its packaging and alignment. Like others have pointed out, the packaging was insufficient considering the weight of the product, leading to concerns about its integrity during shipping. Additionally, there was an alignment issue with the third bolt hole on the driver's side, which was not mentioned in the installation videos on etrailer.com. While the website suggests bending and flexing the product to address this, I believe such modifications shouldn't be expected from customers, and it reflects poorly on etrailer's quality control.
Given these concerns, I'll primarily be using the product for lighter applications like a bike rack or cargo rack. However, I'm apprehensive about the reliability of the third bolt. If I happen to be in the vicinity of etrailer in St. Louis, I might consider visiting them to rectify the issue. Other than this, I was happy with the process and the product.
by: Ernest01/04/2024
The hitch was very easy to install! However, I could only get 4 of the 5 bolts to work. The fifth bolt hole (driver side closest to the front) half covered the hole in the frame.). I only bought it to haul our bicycles so this should be fine but I wouldn’t try it under full load.
by: William 08/17/2024
William S was a pro and helped me catch a mistake in my order before it shipped. Hitch fit perfectly and installed easily.
by: Perry Pirillo02/28/2024
Fairly easy to install, even for a 64 year, like me. Just had a little trouble with the bolt holes being rusty on drivers' side and passenger side had a plate I had to remove.
by: Ed03/23/2020
2018 Nissan Rogue (not the Sport model). Perfect fit. Hidden well. Will order again from etrailer for my next car.
I use a longer ball mount to ensure trailer clears the bumper. For the electrical I purchased the Nissan wiring harness and cut the end off instead of going through the floor of the car (not a good idea in my opinion). Instead I used the connector portion that came from etrailer and hang it out the hatch when needed (also avoids the weather wear).
Ed
3/24/2021
Perfect. Ive used it several times pulling a 5x8 trailer. Still 5 stars!
by: Nate -03/21/2024
Perfect fit didn't have to remove anything on the car just 5 bolts and i was ready to go. Also best price online and exceptional quality. This is the 2nd hitch i have purchased from etrailer for different cars and will be coming back if need anymore.
by: Peter A.08/08/2019
2019 Nissan Rogue
Excellent product; fit my 2019 Rogue exactly as described in the very helpful video; had no problem installing the hitch which took about 30 minutes (the holes lined up perfectly and I didn't even have to jack up the car or put it on a lift); especially satisfied with the expeditious delivery which took about 4 days. I plan to use it with the Swagman XC 2-bike rack platform style that I ordered from etrailer to carry my wife's and my bikes on vacation trips.
Peter P.
8/9/2020
Works out great. Im very satisfied with both the receiver & the rack.
by: Kenny V05/05/2021
Excuse the dark picture but I installed the hitch by myself as soon as I got home when I saw that it had been delivered. Hitch receiver is very well made and high quality. Everything aligned perfectly and it looks awesome installed. The only thing visible is the receiver tube. Absolutely cannot beat this hitch for the price. Thank you etrailer!
Kenny V.
5/6/2022
Its been a year and everything that I said previously still stands. I use my hitch every weekend and it has held up to everything.
by: Dirk04/06/2023
If it weren’t for careless shipping (or maybe substandard packaging) I’d be much happier! There were four places where the Diana’ finish was scratched down to bare metal. This means, before I can even install it, I’m going to have to paint it so it doesn’t rust in those places. I’m stunned that there was so little packaging or protection besides the outer cardboard box and two, thin wrappings around the frame. The hitch may function great…after $7.50 in paint and an hour of my time.
by: Brielle06/12/2024
The hitch has been working very well. It was easy to install and just what I was looking for.
by: Mark 07/08/2024
Solid product, easy install! Thanks etr ailer..
by: MAF07/16/2021
2012 Nissan Rogue
The trailer hitch receiver for my 2012 Rogue was easy to install. We did not need to drop the muffler. The holes lined up perfectly. The only problem we had was removing the rust from the exposed weld nuts to attach the hardware on the driver's side.
Fast Delivery- received it before expected
Sierra K.
7/20/2021
Thank you for your review. Here are some helpful tips for cleaning weld nuts:
Helpful Links
by: Joe07/11/2019
Looks nice feels solid and installs simply. This hitch is exactly what I needed for the bike carrier I use and couldn’t be happier. Installed on my 2008 Nissan Rogue with my only troubles being the rogues frame being a little crusty making the bolts tough to screw in on the left side. Nothing brute strength and spray lube couldn’t handle though. Did not need to move the exhaust or modify anything as it fit perfectly.
Joe
7/11/2020
Fantastic. Absolutely no issues
by: Harshil03/28/2024
I've had this hitch on my vehicle for over a year and still holding strong. No rust at all. I highly recommend this hitch.
by: Jimmy12/31/2020
Hitch working great. Pull my trailer and teardrop camper with it. Was easy to install. If you need a hitch check out these guys
Jimmy
1/1/2022
Works great with both of my trailers
by: James08/11/2022
2018 Nissan Rogue
Amazingly quick delivery...a couple days. One piece so pretty simple, actually it won't go on wrong. Still tricky lining up holes and holding it in place for bolts...definitely a two man job (and one fairly strong, holding it in place). Only real challenge was removing and reinstalling the rubber/plastic covers from the vehicle. Very heavy duty, haven't towed yet but looks like the car will fail before the hitch does!
James
8/14/2023
Great! Simple but not necessarily easy to install...had to move a few things under car around, but with neighbors help, AOK.
by: Larry 06/13/2024
2017 Nissan Rogue
Well explained. Easy installation. Just what we needed. Fair price.
25
1036
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Trailer Hitch for 2020 Nissan Rogue to Carry Kuat NV 2.0 Bike RackThe etrailer hitch part # e98846 that you referenced would be a great hitch choice for your 2020 Nissan Rogue to carry a Kuat NV 2.0 bike rack part # NV22G. The etrailer hitch is mostly hidden since only the hitch hangs below the rear bumper and has the highest tongue weight rating which is why I recommended it.
view full answer... - Trailer Hitch Recommendation for 2017 Nissan Rogue The etrailer hitch part # e98846 would be a great option for your 2017 Nissan Rogue as it's mostly hidden and has plenty of towing capacity. Like all of the hitches that fit your vehicle there will be some fascia trimming needed and the panels will have to be removed temporarily for install which is standard for hitch installs on your vehicle as well as others. I attached an install video for this hitch on a similar 2017 Nissan Rogue. For trailer wiring then the Tekonsha kit part # 118480...
view full answer... - Will etrailer Trailer Hitch Receiver Fit 2019 Nissan Rogue SportThe # e98846 hitch you were looking at is designed to fit the 2019 Nissan Rogue. For the 2019 Nissan Rogue Sport you would need the # e79YR instead. This has the same capacity, bolt-on installation, and a 2" receiver. The only difference is the design to fit the Sport model. If you plan on towing, you will also need wiring and a ball mount. The Curt T-Connector Vehicle Wiring Harness # C56397 plugs into the connection points in your rear cargo area. This will provide you with a 4-way...
view full answer... - Will etrailer Trailer Hitch For 2011 Nissan Rogue Allow Hatch to Open w/ Kuat Transfer V2 Bike RackExcellent choices for your 2011 Nissan Rogue, and you will indeed be able to open the rear hatch with the hitch and Kuat rack you asked about: - etrailer Trailer Hitch Receiver # e98846 - Kuat Transfer V2 Bike Rack # KU84FR With no bikes on the rack, you will have full rear hatch access, opening it up completely without issue. If you have bikes on the rack, when you tilt the rack down - depending on how long the handlebars on your bikes are - it may not allow the hatch to go all the...
view full answer... - etrailer Trailer Hitch Receiver # e98846 Driver's Side Mounting Bracket Clearance of Exhaust HangerThe etrailer Trailer Hitch Receiver # e98846 will have a larger notch for the exhaust hanger on your 2011 Nissan Rogue that is coming into contact on your Draw-Tite Hitch # 75902. I felt that the best way to show you is with a picture that I have included of the etrailer hitch installed on the Nissan Rogue. You can see where the bolt hole is in relationship to the notch in the receiver for the exhaust mount. This will help you to see if the exhaust hanger on your Rogue will interfere...
view full answer...
- Trailer Hitch Recommendation that Fits 2015 Nissan Rogue SVThe etrailer hitch # e98846 would be a great hitch for your 2015 Nissan Rogue SV AWD. It's mostly hidden as only the hitch opening hangs below the rear bumper (also helps with ground clearance), and also has great towing capacities as well. It actually fits all models of the 2015 Rogue which is how it fits the SV models. If you need trailer wiring too the Curt kit part # C56033 would be a great option as well. It does not require any splicing of the vehicle wiring since it is a custom fit.
view full answer... - Class III Trailer Hitch and Wiring for 2018 Nissan RogueWe do have a towing set up, including a Class III, 2 inch trailer hitch receiver that will fit your 2018 Nissan Rogue. Let's start with the trailer hitch, and the best option for your Rogue is the etrailer Trailer Hitch Receiver # e98846. This hitch has the best capacities, is a complete bolt-on installation, and a rugged matte black finish that is going to hide the inevitable nicks or scratches better than the glossier finish of the other hitches that fit your Rogue. Along with the...
view full answer... - Trailer Hitch Receiver, Wiring, and Ball Mount For Towing a U-Haul Trailer With a 2018 Nissan RogueI recommend the etrailer Trailer Hitch Receiver # e98846 for your 2018 Nissan Rogue. This receiver is rated for 525lbs of tongue weight and 3,500lbs of total trailer weight. Be sure to verify your maximum towing capacity with your Nissan dealer. The etrailer Ball Mount Kit # 989900 will provide you will 2 ball mounts and a 2" or 1-7/8" ball. Either ball will fit the U-haul trailer you intend to haul but the ball mounts have different amounts of rise(1"or3") to allow you to best level...
view full answer... - Recommended Bike Rack for 2018 Nissan RogueWhile there are options for your 2018 Nissan Rogue, the Hollywood Racks Over-the-Top 2 Bike Carrier for Vehicles w/ Spoilers # HRF2 is not a confirmed fit. The Nissan Rogue got a facelift in 2017 that made it hard to put trunk mounted bike racks on it. The biggest fitting issue comes how the rear bumper is designed. The only relatively affordable trunk mounted option for your vehicle is the SeaSucker Hornet Vacuum Cup Mounted Bike Rack # 298-BH1302. It attaches to the rear window and can...
view full answer... - Will etrailer Trailer Hitch Receiver e93ZR Work With Lift Gate Sensor On 2021 Nissan Rogue SL?I would be happy to help! A trailer hitch receiver like the etrailer Trailer Hitch Receiver # e93ZR will partially block the rear lift gate sensor on your 2021 Nissan Rogue SL but it will still work by placing your foot on either side of the receiver. You will want to move your foot in and out until you find the sweet spot for the sensor. I recommend going with the # e93ZR due to it having a nice matte black powder coat finish that will blend in nicely black trim on your vehicle, and...
view full answer... - Will A Hitch Mounted Cargo Carrier Affect The Rear Automatic Braking System On A 2019 Nissan Rogue?Yes, we have had issues in the past with trailer hitches and accessories affecting the Rear Automatic Braking system on the 2019 Nissan Rogue. Basically it will detect the hitch and carrier and may cause the brakes to activate while you are backing up. We have not found a work around as of yet. Your best bet would be to contact a Nissan Dealership to see if they know of a way to bypass or deactivate this sensor.
view full answer... - Torque Specifications for Installing etrailer Receiver Hitch e98846 on 2015 Nissan RogueThe Torque Specification is found in the installation instructions on our product page on the etrailer # e98846 receiver hitch. A Torque Wrench # PT87ZR would be the type that you would need to achieve that rating.
view full answer... - Recommended Trailer Hitch for Use with Cargo Carrier on 2017 Nissan RogueIf you are looking for a trailer hitch for your 2017 Nissan Rogue, I recommend our etrailer Trailer Hitch Receiver # e98846. This is a Class III trailer hitch that has a 3,500 lbs towing capacity and 525 lbs tongue weight capacity, which is more than enough for a hitch-mounted cargo carrier to carry an electric scooter. You should also verify the towing and tongue weight capacities of your vehicle, which is usually listed in the owner's manual. If your vehicle weight capacity is lower,...
view full answer... - Recommended Class III Trailer Hitch for 2018 Nissan Rogue That Doesn't Require Lowering ExhaustThe etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98846 does not require the exhaust to be lowered during installation, so it's exactly what you're looking for. I really like the matte black finish on this hitch, so it's going to do a great job of hiding nicks/scratches and dirt, and this is a Class III hitch with a 2" receiver like you're seeking. I've linked an installation video of this hitch for you to check out that details the process. I've...
view full answer... - What size Bolts Are Used For the etrailer Receiver On My 2012 Nissan Rogue?According to the instructions that I have linked below the 5 bolts used are M12-1.25 x 35mm for the etrailer Trailer Hitch Receiver # e98846.
view full answer... - Bike Rack for 2011 Nissan Rogue that Fits Both 2 inch and 1-1/4 inch Trailer Hitch SizesIt will always be better to go from a 2 inch hitch down to a 1-1/4 inch hitch with an adapter as the opposite direction cuts the capacity of the hitch by 50 percent. For that we have the adapter part # HT02 which is a sleeve style adapter that makes the needed conversion. Ideally though you install a 2 inch hitch on 2011 Nissan Rogue like part # e98846 and then go with a bike rack that is designed to fit both sizes with an included adapter like the Thule Doubletrack part # TH92BJ which...
view full answer... - Recommended Parts for Towing Rental Trailers with a 2018 Nissan RogueGreat question! Rental trailers, like from U-Haul, typically come with a surge brake actuator so you'll just need to install a 4-Way like the recommended T-One Vehicle Wiring Harness # 118480 for your 2018 Nissan Rogue Platinum and you'll be good to go! Since it sounds like you'll be towing quite frequently I also recommend picking up the mounting brackets # 18144 and # C57202 so the 4-Way connector will sit near your hitch receiver for easy access. If you don't already have a hitch installed...
view full answer... - Will Trailer Wiring Harness Fit 2017 Nissan Rogue SVYes it will! I am happy to confirm for you that your 2017 Nissan Rogue SV is absolutely compatible with the T-One Vehicle Wiring Harness # 118480. I have added a link below to a video install for you to check out as well. Additionally, if you plan on doing some towing and need a trailer hitch for your 2017 Rogue I recommend the etrailer Trailer Hitch Receiver # e98846.
view full answer... - Which Trailer Hitch Receiver And Hitch Mounted Bike Rack For a 2011 Nissan RogueWe can definetly get you a trailer hitch receiver and bike rack that will work great on your 2011 Nissan Rogue. For a trailer hitch receiver I recommend the etrailer Trailer Hitch Receiver # e98846 which has a 2x2 receiver that offers the most options for accessories like bike racks, and has a tough matte black finish that will resist chipping and scratches, and will blend in nicely to the trim on your Rogue. I included a video of the etrailer # e98846 being installed on a 2011 Nissan...
view full answer... - How to Install Trailer Hitch on Vehicle that is Missing Weld Nuts in Trailer FrameWhat you can do is use a bolt leader like # 80101-1 with a carriage bolt block through an open portion of your frame to basically act as a weld nut so you can install the hitch. This normally is a solution we use when a vehicle has a broken weld nut and we have to come up with a way to install the hitch. We made a video on how to do this which I have attached to this page. Best option will be to source a carriage bolt (it will have square shoulders under the head of the bolt) the correct...
view full answer...
- Trailer Hitch Receiver For a 2016 Nissan RogueThe Curt Trailer Hitch Receiver # C13902 is a multi fit hitch that is not designed for one particular vehicle but will fit on several models with some drilling. This particular hitch is for Chevrolet, Ford and Dodge Trucks. I recommend the etrailer Trailer Hitch Receiver # e98846 for your 2016 Nissan Rogue. This hitch is custom fit to bolt to into the factory weld nuts that are on your Rogue. This hitch is rated for 525lbs of tongue weight and 3,500lbs or trailer weight. Be sure to check...
view full answer... - Is There a T2 Classic Bike Rack For a 2017 Nissan Rogue With a 2" Receiver? The reason you only find the Thule T2 Classic Bike Rack # TH9045 in the 1-1/4" size is because it is the only T2 classic we still carry. You would need to look at a Thule T2 Pro X Bike Rack # TH83GC for a 2" Receiver # e98846 on your 2017 Nissan Rogue. Or you could use a Reducer # e63YR.
view full answer... - Recommendation For Bike Rack on 2012 Nissan Rogue With a Rear SpoilerSince your 2012 Nissan Rogue has a rear spoiler the only trunk mount bike racks that will work are the suction-cup types like the # 298-BH1302 or the # 298-BK1910-AB. Instead, I recommend a hitch for your Nissan Rogue and a hitch mounted bike rack. If you don't already have a hitch, the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98846 would work great. Then for a bike rack, I recommend the Thule Camber # TH9058. I attached a video of this...
view full answer... - Is there a Hitch for a 2019 Nissan Rogue Special Edition? Yes, the etrailer Trailer Hitch Receiver item # e98846 fits all models of the 2019 Nissan Rogue including the special edition. This hitch is custom fit and bolts directly to your frame with included hardware. It installs in preexisting holes and does not require any drilling or welding. I have linked an installation video and attached a picture below so you can follow along with the process and see the final product. If you need a wiring harness to control your trailer or accessories...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Michael B
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Wilson B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Leo
6/29/2024
No issues one year on, still performing as expected, though I only use it for a bike rack.