See what our Experts say about this CURT Trailer Hitch

• Hidden Hitch Recommendation for 1982 Chevy S-10 with a Roll Pan Bumper
  Hey Jeff, we have the Curt hitch # 13920 that fits your 1982 Chevy S-10 that has a roll pan rear bumper. This would fit behind the license plate so when not in use your license plate would cover it and it would be totally hidden.
  view full answer...
• Will Curt Hitch 13920 Hide Behind License Plate of 1991 Chevy S-10 with Roll Pan
  Hey Isaiah, yes when the Curt hitch part # 13920 is installed and you have a ball mount removed from it you'd be able to fold up the license plate and completely conceal it.
  view full answer...
• Curt Trailer Hitches that Fit 1998 Chevy S-10
  For your 1998 Chevy S-10 we have Curt hitches that fit like the # C13021 which fits models with the factory step bumper and the part # 13920 which fits models with the factory roll pan bumper, but the # C13020 that you referenced does not fit the S-10. It fits the following: 1995 - 2005 Chevrolet Blazer 1996 - 2004 Oldsmobile Bravada 1995 - 2001 GMC Jimmy
  view full answer...
• Help Picking Out Trailer Hitch for 1997 Chevy S-10 with Sportside and Roll Pan Bumper
  Sounds like you have the Sportside with a non towing bumper which would mean you would want the part # 75085. If instead you had the factory roll pan bumper you would want the pat # 13920. I attached a picture of what the sportside with non-towing bumper looks like. If that matches your truck you would want the # 75085.
  view full answer...
  
• Trailer Hitch Fit for 1998 Chevy S-10 Truck
  The correct hitch will depend on which bumper your S-10 is equipped with. For a factory step bumper, I'd recommend the Curt # C13132. For a roll pan bumper, you'll want to use # 13920, but you'll need to cut a hole in the license plate well and find an old-school hinged license plate holder online or from a salvage yard. If you have a short bed truck, the # 13920 hitch will prevent the spare tire from being stowed under the vehicle.
  view full answer...
• Recommended Hitch for a 2002 Chevy S-10 Extreme that Mounts Behind the License Plate
  Thanks for the picture! For your 2002 Chevy S-10 Extreme, you will want the Curt Trailer Hitch item # 13920. This hitch is custom fit and bolts to your S-10 with included hardware. Since your truck has the factory roll pan bumper this will mount the hitch behind your license plate. The Curt Trailer Hitch item # 13920 is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity, and a 350 lbs maximum tongue weight. This hitch is made in the USA and weighs 27 lbs. If you...
  view full answer...
  
• Trailer Hitch Recommendation for a 1992 Chevy S-10 with Roll Pan Bumper
  The Curt hitch part # 13920 is designed to fit the 1992 Chevy S-10 trucks that have the factory roll pan bumper. This hitch would fit behind the license plate so it sounds like this would be exactly what you would need. For trailer wiring you would then want the part # C55312. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop....
  view full answer...
• What is a Roll Ban Bumper when Looking at Trailer Hitch Fits for a 1989 Chevy S-10
  If you take a look at the picture I have included the truck in it has a type of roll pan bumper. Essentially it is a bumper that matches the contours of the vehicle instead of protruding out like a regular step bumper. If your 1989 Chevy S-10 has a regular bumper then you can use Curt hitch # C13021. If it has a roll pan bumper then use # 13920. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch...
  view full answer...
  
• Trailer Hitch Receiver Needed for 2001 Chevy S-10 Xtreme Trim
  Curt # 13920 works with you 2001 Chevrolet S-10 Xtreme. The Xtreme trim has a roll pan style rear bumper which is not designed for trailer hitches. The Curt hitch's receiver tube is mounted on the top of the cross tube and is concealed behind the license plate. You do want to keep in mind the hitch sits higher than a normal S-10 due to the receiver tube being mounted behind the plate. I have also attached a ball mount set # 989900 that offers two ball sizes, two different drops, two pins...
  view full answer...
• Which Trailer Hitch Fits 1999 Chevy S-10 Roll Pan Bumper
  For your 1999 Chevy S-10 with a roll pan bumper we do have the Curt hitch part # 13920 which is a confirmed fit and would work great!
  view full answer...
• How To Determine If the Curt Trailer Hitch 13920 Will Line Up With Roll Pan Bumper on Chevy S-10
  The Curt Trailer Hitch Receiver part # 13920 is designed for a 1982 - 2004 Chevrolet S-10 Pickup with roll pan bumper so this will be the best option we can offer. It's hard to say whether or not the trailer hitch will line up with the license plate area but if you measure down from the upper mounting holes the top of the receiver tube will be around the 2-1/2" mark.
  view full answer...
  
• Hitch Recommendation for a 2002 Chevy S-10 Extreme with Roll Pan Bumper
  The Curt Hitch part # 13920 has been confirmed to fit your 2002 Chevy S-10 Extreme with a roll pan bumper. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
  view full answer...
• Class III Trailer Hitch Recommendation for 2003 Chevy S-10 Extreme
  For the 2003 Chevy S-10 Extreme we have the Class III Curt hitch part # 13920 which is a fit since your truck has the factory roll pan bumper.
  view full answer...
• Trailer Hitch for a 1996 Chevy S-10 with Roll Pan Bumper
  We do have a trailer hitch for your 1996 Chevy S-10 with the roll pan bumper. it is Curt hitch # 13920. I have included a link to the installation instructions for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit...
  view full answer...
• Which Hitch Do I Need For a 2001 GMC Sonoma
  The hitches that will fit the 2001 GMC Sonoma are based off of the model of the vehicle. If you have a GMC Sonoma that is considered a Sportside with Non-Towing Bumper, factory step bumper or have a ZR2 model, I recommend Class III Draw-Tite Max-Frame Trailer Hitch Receiver part # 75085 which is a concealed cross tube design with 3,500 lbs of gross towing weight capacity. The concealed cross tube is a nice discreet design because once installed you only see the receiver tube portion of...
  view full answer...
• Recommended Trailer Hitch For 1997 GMC Sonoma With Rear Roll Pan Bumper
  We do have a trailer htich that will work with your 1997 Sonoma with the rear pan bumper. I recommend the Curt trailer Hitch, part # 13920. This is a Class lll hitch and it has a 2-inch receiver opening. One tech note states the roll pan will need to be cut in the license plate area for receiver access. The trailer hitch you came from, part # 75085, is not designed to be able to work with your roll pan bumper. If you plan on doing some towing you might be interested in etrailer ball mount...
  view full answer...
• Recommended Trailer Hitch Receiver For 2003 Chevy S-10 Sportside With Roll Pan Bumper
  For your 2003 Chevy S-10 Sportside, I recommend the Curt Class III # 13920 which offers a concealed cross tube. If your bumper is factory, you won't have any issues. If it is aftermarket, I can't confirm you won't need to do any modifications. This hitch is a square tube design with a black powder coat finish over a protective base coat for extremly durable rust resistance. For your trailer wiring, I recommend the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer...
  view full answer...
• How to Determine Which Trailer Hitch Receiver Will Fit 2003 Chevrolet S-10 with Aftermarket Bumper
  To determine if a trailer hitch receiver will fit on your 2003 Chevrolet S-10 that has an aftermarket bumper you'll have to do a little measuring. There are three Curt Class III trailer hitch receivers that may work for you. You'll need to measure from the mounting holes on your truck's frame to the underside of the bumper to see if there is enough clearance. The measurements of each hitch that you will at least need are: # 13920 - 2.353 inches # C13132- 8.32 inches # C13021- 10.20...
  view full answer...
• Curt Class III # 13920 Trailer Hitch for 1997 Chevy S-10 SS Pickup With Roll Pan Bumper
  We do have a Curt Class III hitch, part # 13920 that's compatible with the roll pan on your S-10, as long as the roll pan is factory installed, and not aftermarket. The receiver opening would be concealed behind the license plate, so you'd need to cut a hole behind the plate. You might also need the following to complete your towing system: Trailer wiring harness, part # C55312 Ball mount, part # AMSC2 1-7/8 inch trailer ball, part # 19260 2 inch trailer ball, part # 63845 To view the...
  view full answer...
• Trailer Hitch Receiver to Fit 2004 GMC Sonoma Crew Cab SLS
  The Draw-Tite Max Frame # 75085 is confirmed to fit your 2004 GMC Sonoma Crew Cab as long as you have either the factory step bumper or non-towing bumper. If your truck has the factory roll pan bumper then the Curt # 13920 is the correct hitch. If you're going to be towing with your truck you may also need wiring for your trailer's lights. The Curt Wiring Harness # C55359 will provide a 4-way trailer connector. This installs by plugging into your truck's wiring behind the rear bumper,...
  view full answer...
• Trailer Hitch Receiver Compatible With 1992 GMC Sonoma Short Bed
  The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13132 will fit your 1992 GMC Sonoma truck as long as you have a factory step bumper. It will require temporary removal of the rear bumper during installation. It is not a fit for a roll pan bumper. If you have a roll pan bumper, you will need to use the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13920. This will require a relocation of the spare tire in short bed models as well as cutting the rollpan...
  view full answer...
• Does Spare Tire have to be Moved to Install a Trailer Hitch on 1992 Chevy S-10 with Roll Pan Bumper
  According to Curt, when installing trailer hitch # 13920 on a 1992 Chevy S-10 with the factory roll pan bumper you only have to relocate the spare tire if the truck is a short bed model (6 foot bed). I have included a link to the installation instructions for you. This is the only hitch for models with the roll pan bumper. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
  view full answer...
• Availability of Trailer Hitch for 1998 Chevrolet S-10 pick with the Extreme Kit
  From my research it looks like the 1998 Chevrolet S-10 pick with the Extreme Kit comes with a roll pan bumper. If that describes your vehicle then we do have a class III trailer hitch for you. Take a look at part # 13920. I have included a link to the installation instructions for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch...
  view full answer...
• What Hitch Fits A 1999 GMC Sonoma Without A Step-Up Bumper And No Cutting Of Rear Fascia
  Yes, I will be able to help you get the correct hitch. The hitch you will need for your 1999 GMC Sonoma with rear fascia and no step bumper is the Curt Class III Trailer Hitch, # 13920. It is a 2 Inch Class III hitch that has a Gross Towing Weight of 3,500 lbs. and a Tongue Weight of 350 lbs. The Draw-Tite Trailer Hitch, # 75085, you have referenced is for 1999 GMC Sonomas with step-up rear bumpers. If you will be towing, you will need the Curt Ball Mount, # C45010, and the Pin and Clip,...
  view full answer...

Do you have a question about this Trailer Hitch?