bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # DT32RR
lowest price pledge
Retail:$392.20
Our Price: $246.10
You Save: $146.10
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 46 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number DT32RR can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (85)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - DT32RR

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Draw-Tite
  • Concealed Cross Tube
  • 500 lbs TW
  • 6000 lbs WD GTW
  • 750 lbs WD TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 500 lbs
      • Maximum TW when used with weight distribution: 750 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76420 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Installation Details DT32RR Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - DT32RR

Average Customer Rating:  4.7 out of 5 stars   (85 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2022 Kia Telluride

Fit a 2022 Kia Telluride SX perfectly. No cutting of the bumper. No cutting any trim etc. Watch the video that etrailer made. It walks you through the process perfectly. The bolt on the passenger side WILL fit past the heat shield. Put the washer against the opening first then put the bolt through. It will go with a little pressure. The silicon lubricant helps to get the muffler hangers off. Undo the two muffler hangers near the bumper and the one in the middle. Have a rest for the muffler at this point. You can slide the rubber muffler brackets off by hand if you spray them first. No tool needed. Get it at any auto parts store. This can be done alone but if you have a helper to get the bolts through while you hold the hitch it helps. Total install took me about an hour and a half. Bring your iPad with you and pause the video as you do each step. Average Joe can do this.




by:

Thanks for checking back. I had two issues. First the power coating is very poor. A small amount of paint had chip off when it first arrive. I patched it but a lot more has fallen off since then. I have powder parts in my car restorations work and your trailer hitch was poorly power coated. I expect it to be nothing but rusted metal in couple of years.

Second item is the fit wasn’t that great. I had to cut the exhaust heat in two different locations. Now that I finally have the hitch installed the exhaust system bangs against the hitch every time I drive over a bump or ruff road. This is the third e trailer hitch I have installed and by far the worst. I wish I had bought the car manufacturers hitch.
Sorry for the poor review but I am just disappointed. In the past I have always had good experience with your company and have recommend you to friends and family but this last purchase was a just plain bad.


Comments
With the powder coating of the hitch, I recommend touching it up with a can of Rustoleum if you have not already done so. It will help prevent rust in the future as long as you keep an eye on it. For the exhaust ratting against the hitch we do have an FAQ with possible solutions. Please see the FAQ below.
-- Etrailer Expert Jenny N - 09/13/2022


by:

Due to poor packaging, our item arrived damaged in 2 spots. The box torn left 2areas where the protective covering is scraped off, meaning it will be exposed to the elements and rust.


Comments
I will have our Customer Service team reach out to you. I recommend touching up the affected areas with a rust resistant paint which you will then have on hand for regular hitch maintenance. When the hitches are installed on the vehicle ove time they will be hit with raod debris which will cause nicks and scratches over time.
-- Etrailer Expert Jenny N - 04/26/2022


by:

This was not difficult to install at all. While I was waiting for the hitch to arrive, I watched Youtube videos on the instillation. When the box arrived I already knew what I needed and got after it. Very nicely designed so that the only piece that is visible from the bottom is the square tube connector for the hitch.


Comments
Well it’s been a year and we could not be happier! This hitch has more than served its purpose. We use it quite regularly. When we travel we want our dogs to have all the space inside our vehicle Hyundai Palisade. For that reason we mount a luggage rack to the hitch and we’re able secure everything. From time to time we also pull our trailer and it performs flawlessly! The vibration pin is a nice touch. I don’t have that on my pick up truck and I can tell the difference between the two
Enrique N - 05/04/2022


by:

Product as described. The hardest part of the install was raising the exhaust and having the heat shield get in the way, which we needed to be bend a little to allow for the exhaust to go back in the original position.




by:

4th hitch I Ave installed with no issues. Installation videos were a great help.




by:
2021 Hyundai Palisade

This item was installed on a '21 Hyundai Palisade with the Calligraphy Trim level. It fit perfectly with NO trimming required to the rear bumper lower edge. This is an important fact as the similar Drawtite prduct does NOT fit on the Calligraphy version of the Palisade without trimming. We also appreciated the excellent customer service demonstrated when we needed to do an exchange from Drawtite to Curt.




by:

This hitch, like every other hitch I've bought over the years from etrailer.com, was a perfect fit for my 2020 Palisade. The directions are thorough and all hardware is included. I was able to install mine solo without having to lift my vehicle. I used two jack stands to balance the hitch as I moved it into position. Once you get the top bolts in place "it ain't going anywhere". Torqued everything down to specs. Was pleasantly surprised I didn't need use any pivot extenders / etc. Everything fit nicely with 17mm and 19mm sockets, 17mm and 19mm open end wrenches, and a torque wrench to finish it off.




by:

love my hitch and wiring from etrailer




by:
2021 Hyundai Palisade

I rec'd the hitch less than 48 hours after I ordered it...sent from MO to PA...amazing. Great online installation video. I was able to easily install it the same day I received it. I couldn't be more pleased with the delivery, installation, and the product!


Comments
A year later my feelings about the hitch are still the same...great product!! No complaints whatsoever!
Gary - 01/22/2022


by:

High quality, great hitch. etrailer was super easy to work with and their how-to videos are great!




by:

It took a little to line up the holes, but it all went well. Thanks




by:

Great job by Paul B. Received the hitch in tow days…Excellent!




by:

Very good directions, easy install, I did it myself, with wires took about an hour. Only complaint is that the receiver hole is a little bigger than the hitch so it rattles..




by:

This does NOT fit a 2020 Palisade. Install was easy enough but as you can see from the picture the metal piece is pushing up into the bumper causing it to deform. There is no way around this unless you are willing to cut into the bumper. I would not recommend this hitch to anyone with a Palisade. It was obviously designed for another vehicle.




by:
2020 Hyundai Palisade

I give etraler.com 5 out of 5 star for their customer service support. However, the product itself is not what I expected. The hitch did not fit my car perfectly. I had to trim off the bumper to make it flush. Also, the design did not account for the bolts interfering from placing back the original plastic undercover. I had to trim the plastic cover to make room for the bolts in order to place them back. In addition, round tube was in direct contact with the muffler shield. I had to bend and modify the shield so that the bar would not touch the muffler heat shield. Overall, there were some design flaws that did not account for several areas and required some modification on my end. I just expected something more "fitted" with this hitch design.


Comments
Thank you for your review. All of this sounds pretty normal. It sounds like your hitch was a bit flexed. I will attach a help article explaining flex. Also, the hanger bracket sometimes becomes loose and all it needs is to be bent holding the muffler tighter. Trimming is also sometimes needed. This sounds like normal tweaking for your hitch install.
-- Etrailer Expert Sierra K - 06/10/2021


by:
Kia

Great fit for a Kia Telluride 2020. Has worked well. I have not used it to pull anything strong, have just been using it as a bike rack but works like a charm.




by:

Purchased a Draw tite hitch & wiring from etrailer for my sons Palisade. We watched the ‘how to’ video before starting the install. Great info gots us going in right direction from the start. As described start to finish in less than 60 mins!

Both hitch & wiring fit perfectly. We did have an advantage using my 36 in hydraulic scissor lift. Per the video, spray rubber exhaust hangers with silicon spray & they pop off with little effort. We used a jack stand to prop up exhaust while installing the hitch. Only small glitch was reinstalling the drivers side underbody trim. The hitch bolt created a interference to lining up the 14 mm bolt. A small clip off of the plastic underbody trim gave clearance & we finished the job.

First time buying from etrailer but definitely not the last! Great people to do business with




by:

Fit vehicle like a glove as their website stated, installed in a little over an hour in the dark with a flashlight.




by:

I have ordered from etrailer before and have been very happy with the service and products. The customer service staff stayed in contact with me when I had questions and when my order arrived, The Kuat NV 2.02 was a great price when compared to all other on-line stores. We are very happy with the high quality and function of the Kuat NV 2.0 bike rack. Thank you!




by:

Great quality with easy installation!!!




by:
2020 Kia Telluride

Install took a little longer than what was shown in the video using basic hand tools. Website said no cutting of the rear facia but the instructions that came with it stated clearly that it would need to be cut to fit. I installed it without cutting the facia. Receiver makes contact with the facia where it drops down for the trailer hitch. It bent the plastic down a bit and was able to install it without cutting. Packaging was good when it was received but paint was chipped in a couple of places when I opened the box. Overall it was a good fit, very well made and welds were good quality. Quick shipping, it arrived when they said it would. Staff at etrailer processed order quickly. I have bought from them in the past and will do so again in the future.




by:

I had never heard of etrailer when I purchased this trailer hitch from them. I was blown away by the customer service, speed of delivery and quick resolution to my issues (the carrier that delivered the product mishandled the box and parts were missing). I've since ordered other products from them and have recommended them often. Great company to do business with.




by:

Hitch still working great 1 year later!




by:

I am not handy at all and I installed this on a 2021 Telluride in 90 minutes, no jackstands, no lift, all by myself. I put in on my belly and arched to lift it up. It was heavy and kind of tricky but once I had a bolt in it got easier. I did have to use a grinder to cut off part of one washer because it wouldn't fit and I also reversed the bolt direction on the passenger side because there is a some kind of shield that prevented the bolt and washer from going in easily. I wasn't sure if I should remove that little piece at the bottom of the bumper. I left it on but it is deflected slightly. I think it is fine.



25
85
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch



  • Draw-Tite Hitch # DT32RR is Making Contact with my Rear Bumper Cover of my 2020 Hyundai Palisade
    This is very common in hitches like the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT32RR. It is done to eliminate the need to trim the bumper cover and still get as much ground clearance as possible. It is likely that the bumper cover will get few blemishes on it since it is resting on it but this will not be an issue unless you decide to remove the hitch down the road. I recommend pushing the bumper cover back toward the front of the vehicle so it is gently resting on top instead...
    view full answer...
  • Capacities of Draw-Tite DT32RR Hitch on 2021 Hyundai Palisade
    For the Draw-Tite Class III hitch that you'd looked at, part # DT32RR the capacities are 500 lbs tongue weight/5000 lbs towing or 750 lbs of tongue weight and 6000 lbs towing if used with weight distribution. This being said, you'll be limited to the 500 lb tongue weight capacity that's stated in the owner's manual. Using a weight distribution hitch can raise the tongue weight capacity of the hitch, but you still would need to abide by the manufacturer's specified towing capacity. I've...
    view full answer...
  • Will the Draw-Tite Hitch # DT32RR Fit My 2022 Hyundai Palisade Calligraphy Model?
    Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit # DT32RR will fit on your 2022 Hyundai Palisade Calligraphy edition. I went ahead and attached an installation walkthrough video for a 2021 model. Your 2022 Palisade will be nearly identical.
    view full answer...
  • Correct Trailer Hitch Fit for a 2023 Hyundai Palisade
    I checked with Draw-Tite and was able to confirm the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT32RR as a fit for a 2023 Hyundai Palisade.
    view full answer...
  • Trailer Hitch For A 2023 Hyundai Palisade
    As of now the only hitch that we have available for your 2023 Hyundai Palisade is The Draw-Tite Max-Frame Trailer Hitch Receiver # DT32RR which is already available for order. As of now we do not know if there will be an etrailer hitch in the coming months. The trailer wiring is the same, there will eventually be a confirmed to fit harness for your vehicle in the near future. The Draw-Tite Hitch # DT32RR has an easy bolt-on installation with no welding required. It has a black powder...
    view full answer...
  • Availability of Hidden Hitch that Fits 2023 Hyundai Palisade
    Based on the design of the 2023 Hyundai Palisade I would not anticipate a through bumper hitch being made for it. There's isn't a removable rear panel on the vehicle so the hitches made for it like the Draw Tite part # DT32RR hang below the rear bumper. This hitch also fits the 2022 models and I checked all of the fits for the 22' models and none of them came through the rear bumper cover and they all hung below it. This hitch only has the hitch opening hanging below the rear bumper though...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2022 Hyundai Palisade
    For your 2022 Hyundai Palisade I recommend the Draw Tite hitch part # DT32RR because it's mostly hidden, has great towing capacities, and an easier install compared to other similar options. I attached an install video for you to check out as well. If you need trailer wiring too the part # 118784 installs easy and is reliable as well.
    view full answer...
  • Hitch Receiver and Wiring Harness for a 2022 Hyundai Palisade
    Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT32RR is confirmed to fit your 2022 Hyundai Palisade. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I have attached an installation video. If you are going to be towing a trailer you will want to be able to control your trailer's lighting functions. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118784. This wiring harness plugs into your Hyundai's existing...
    view full answer...
  • Can Draw-Tite Trailer Hitch For 2022 Kia Telluride Tow Max Capacity
    According to the owner's manual I found online for your 2022 Kia Telluride, it has a towing capacity of 5,000 lbs for a trailer so long as that trailer has brakes (I do recommend verifying this in your version of the manual). And yes, you will indeed be able to tow that capacity with the Draw-Tite hitch that fits your '22 Telluride: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT32RR The Draw-Tite # DT32RR has a 5,000 lb towing and 500 lb tongue weight capacity which are the exact limits...
    view full answer...
  • Mostly Hidden Trailer Hitch Recommendation that Fits 2023 Hyundai Palisade
    Yes we do have a hitch that fits your 2023 Hyundai Palisade with the Draw Tite part # DT32RR which is mostly hidden. Only the hitch opening hangs below the rear bumper which gives it a mostly hidden look that also helps with ground clearance like when turning into driveways. If you need trailer wiring too the Tekonsha kit part # 118784 would be the way to go as it's the easiest to install and has a very reliable converter box.
    view full answer...
  • Mostly Hidden Trailer Hitch Recommendation for 2023 Kia Telluride Recommendation
    We have the Draw Tite trailer hitch part # DT32RR that fits your 2023 Kia Telluride which is mostly hidden and would work great. It has great towing capacities and also installs pretty easily. If you need trailer wiring too the Tekonsha kit part # 118784 is a fit and has a very reliable converter box so we recommend it highly as well.
    view full answer...
  • Trailer Hitch Recommendation/Comparison for 2020 Hyundai Palisade
    The Draw Tite part # DT32RR and the Curt # C13420 that both fit your 2020 Hyundai Palisade are very similar in design and one would not be more hidden or necessarily install easier than the other. But I do recommend the Curt as it's got better weight capacities and in general Curt has a little better fit and finish. I attached an install video and picture of it installed for you to check out as well.
    view full answer...
    Image 1 for
  • What Trailer Hitch do You Recommend for My 2022 Kia Telluride?
    For a hitch that fits your 2022 Kia Telluride, I recommend the Curt Trailer Hitch Receiver - Custom Fit # C13420. The Curt hitch has a maximum tongue weight capacity of 750 pounds and a maximum gross towing capacity of 5,000 pounds. With the 750 pound tongue weight, it has an advantage over the competing Draw-Tite # DT32RR. In addition, the hitch comes with all hardware required for a bolt-on installation. I went ahead and attached an installation video to walk you through the process.
    view full answer...
  • What Hitch Do You Recommend for My 2022 Kia Telluride?
    For the best hitch for your 2022 Kia Telluride, I recommend the Curt Hitch # C13420. The great thing about the Curt hitch is that it is a great economical hitch that provides you with 750 pounds of maximum tongue weight and 5,000 pounds of maximum gross trailer weight. Also, the Curt hitch installs closer to the edge of your bumper (about 3-1/2 inches) compared to the competing Draw-Tite Hitch # DT32RR (about 4-1/2 inches). This clearance measurement is important if you are considering...
    view full answer...
  • Will Draw-Tite Trailer Hitch Receiver DT32RR Fit 2021 Hyundai Palisade Calligraphy?
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT32RR you were looking at is confirmed to fit all models of the 2021 Hyundai Palisade, including your Calligraphy model, so the hitch will fit just fine. The # DT32RR 500lb tongue weight rating and 5000lb trailer weight rating making it a great option for carrying a bike rack, a cargo carrier, or a ball mount to tow a trailer. If you are planning on towing with your Palisade you will also need a vehicle wiring...
    view full answer...
  • Will the Draw-Tite Max-Frame Trailer Hitch Receiver DT32RR Fit a 2022 Hyundai Palisade Calligraphy
    The Draw-Tite Max-Frame Trailer Hitch Receiver # DT32RR is confirmed to fit all models of the 2022 Hyundai Palisade, including the Calligraphy. This Class III hitch has a 2" receiver with a maximum gross trailer weight of 5,000 lbs so it will be perfect for towing your trailer. It also has a concealed cross tube so only the receiver will be visible, helping to maintain a factory look. For a complete towing setup you will also need wiring and a ball mount. The Tekonsha T-One Vehicle Wiring...
    view full answer...
  • Which Trailer Hitch Should I Get For My 2022 Hyundai Palisade
    The main difference between the Curt Hitch # C13427 and the Draw-Tite Hitch # DT32RR is that the Curt hitch has a higher tongue weight rating. I recommend going with the Curt hitch just for that reason and that it is made in the USA.I recommend checking your vehicle's manual to make sure you do not exceed the capacity of your vehicle. I attached a install video link below.
    view full answer...
  • Trailer Hitch Receiver & Wiring Harness Fit For 2023 Hyundai Palisade
    We do indeed have a trailer hitch receiver as well as a 4-way wiring harness fit for your 2023 Hyundai Palisade; the correct parts are the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT32RR - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118784 This gives you a hitch with a 2 inch receiver and nice hidden look, as the crosstube will be hidden under the bumper, so your Palisade is going to maintain its factory appearance. The 4-way is a simple plug-in...
    view full answer...
  • Best Trailer Hitch Receiver For 2023 Hyundai Palisade
    The best trailer hitch for your 2023 Hyundai Palisade is from Draw-Tite, and is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT32RR The reason I like the Draw-Tite the best is because it has the best ground clearance of the hitches for your Palisade, as well as a handy mounting tab for a trailer wiring harness if you plan on towing. Ground clearance is important for accessories like a bike rack because it helps them avoid contact with the ground, and if you're...
    view full answer...
  • 2020 Hyundai Palisade Hitch & Bike Rack Recommendation
    For a leased vehicle like your 2020 Hyundai Palisade the best hitch option is the Draw Tite part # DT32RR as it does not require any drilling to install, is mostly hidden, and would do an excellent job carrying a bike rack. For a bike rack I really like the Hollywood Rack Trail Rider part # HR200Z as it's by far the best value you can get for a bike rack. It's well made, easy to load, and very stable while not at a crazy price. I attached a review video for the rack for you to check out...
    view full answer...
  • Best Trailer Hitch Receiver for 2021 Kia Telluride
    There are a pair of trailer hitch receivers that fit your 2021 Kia Telluride, the Curt Trailer Hitch Receiver # C13420 and the Draw-Tite Trailer Hitch Receiver # DT32RR. Between these two hitches, the best is the Draw-Tite because it does not require as much trimming of the fascia length-wise (so it will be a bit less noticeable) The two hitches are otherwise extremely similar, apart from the glossier finish of the Curt compared to the more more subtle-looking powder coat finish of the...
    view full answer...
  • Comparing Trailer Hitch Receiver Clearances on 2022 Kia Telluride
    Like you mentioned, there are two trailer hitches that fit your 2022 Kia Telluride, the Curt # C13420 and the Draw-Tite # DT32RR, and between the two, the hitch with the best ground clearance as well as the best bumper clearance is the option from Curt: - Curt Trailer Hitch Receiver # C13420 The Curt hitch will have a clearance from the ground to the top of the receiver of approximately 16 inches, while the same measurement for the Draw-Tite will be approximately 14 inches. So there's...
    view full answer...
  • Best Trailer Hitch Receiver For 2022 Kia Telluride
    There are two trailer hitch receivers that fit your 2022 Kia Telluride, the Curt # C13420 and the Draw-Tite # DT32RR. Between these two, the best one for your Telluride is the option from Draw-Tite: - Curt Trailer Hitch Receiver # C13420 The reason for that is the Curt has better ground clearance as well as better bumper clearance when installed compared to the Draw-Tite. This can be pretty important particularly for accessories, helping them avoid contact with the ground and clearing...
    view full answer...
  • Best Hitch for Clearance on a 2022 Hyundai Palisade
    When we installed our selection of trailer hitches on a 2022 Hyundai Palisade we found that the Draw-Tite # DT32RR has the best overall clearance at 4" of bumper clearance and 13-1/2" of ground clearance. If you're looking for a bike rack then I recommend going with the Kuat NV 2.0 # NV22G because it combines great looks with easy-to-use features. We actually had the opportunity to put this bike rack on a 2021 Palisade that I'm linking for you to check out.
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Alexander C
Written by:
Alexander C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.