To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (154 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.I am so happy with the hitch. Kim( Kimberley R) helped me so very much. I’m a grandma in 70’s and needed the right product that was easy for me to use. And I am she was great. Answered all of my questions. I was very worried about putting something on my Kia Soul and this is perfect. I have already told people about etrailer.com.
Aside from a hardware issue, the part arrived intact, minimal shipping abrasion and ready to install. I installed the receiver on a 2015 Kia Soul 1.6 base model. I don’t intend to tow but the hitch actually doubles as a rear stabilizer bar. It took out a lot of the lean you feel when you turn.
I followed the instructions and used a hydraulic jack to hold the hitch in place while inserting at least two bolts.
It helps a lot to loosen/remove the fender wheel well
and mud flaps. The fuel cover box must be loosened to allow your tool to access the bolts. Use of a torque wrench on the driver side will be hard. Use of a long handled box wrench is key. Passenger side will be torqued easily.
I pre-lubed the factory thread holes and cleaned them out with a pipe cleaner. Then lightly installed a bolt into each threaded hole to ensure efficiency. Lastly I used car ramps and removed both rear wheels for ease of work…..car was up on jack stands so room was not an issue. Lastly, be patient…..will save your knuckles and stress level.
Quick delivery and fairly straightforward installation. I ordered a trailer hitch for my wife's Kia Soul. It arrived within a few business days. The eTrailer website had helpful videos showing how to install the hitch. I am normally not very comfortable working on cars but the video made it simple and I completed the install in about an hour with minimal swearing!
I was surprised how fast you got my order out to me. I thought my shop was the only one who put the customer first! The shipping info was great and I knew exactly when it would get to my shop. UPS brought it this morning and within 1 hour the trailer hitch was on my Kia Soul. Since I own a small auto repair shop it was a breeze to mount. (So easy even a Ford owner could mount it!)
The hitch is fine but I found that to pull or carry anything like a bike rack for my ebike a Class 2 hitch is really needed. So basically it hasn't been useful and a waste of money. i should have known this ahead of time. It would have been nice if a class 2 was offered here for my vehicle.
Perfect Fit and super fast shipping!! IMO the only place to go for all your hitch and trailer needs.
I was going to video my installation, but it was done before I knew it! The hitch fit perfectly as others had stated. Drop the muffler down by releasing it from hanger, remove the 4 Plastic clips on the underside of bumper so you can flex it for ease of bolt access. You’ll need some WD-40 or Similar product, 18 mm box or ratchet style wrench,18mm socket & ratchet. Make sure to tighten all the bolts up equally from side to side until they’re seated before final torquing
Installation was easy and straightforward, especially if you have access to a vehicle lift! I've used the hitch receiver several times in the past year with no problems at all.
I installed it in literally 20minutes. No jack needed and I only had to undo the fabric liner and slide off the muffler mount. Everything lines up perfectly and secured down. I have already used it several times to haul a trailer/loads and I am loving it. Simply a must have for any Kia Soul owner as its a Game Changer!
Exactly what I needed for my 2015 Kia Soul and Yakima bike rack hitch.
Everything arrived quickly and fit perfectly. I would have liked to know that I could have ordered the bracket for trailer light. Great customer service though!
Got 2 for some reason retired one. Got refund. Installation was easy. Happy with the hitch.
Hitch is easy to put on using the specific vehicle instructions sent with the hitch. I do recommend a ratcheting wrench for the bolt on the Drivers side top. Took less then 30 minutes doing it myself in my driveway on a set of car ramps. One other person to help hold it up in place would make it even faster. I highly recommend this product!! Be sure to order the Item # 3594 Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs to use with this for the 2019 Kia Soul Plus. It provides the perfect distance and height for a small trailer. :)
Delivery was prompt and the fit was perfect. My advice for installation for a Kia Soul though is to install jack stands under vehicle and removal of rear tires. Fender linings are extremely difficult to remove with wheels on. Accessibility of mounting holes for hitch very difficult without wheel removal. Also, on a 2014 Soul, the threaded mount bolt holes were extremely rusted. Prepare for this because the bolts could not be started until the rust was removed (approximately an hour). Other than that, great.
This hitch is a beast! Over 32lbs. of richly painted thick steel.
Because of the weight, it took a little longer to install by myself while laying on my back. I used a stack of 2x6 boards to hold the hitch up in place so I could insert the bolts.
The hitch fits nicely up under the car; perfect fit for my 2017 Soul+. I don't have to worry about it hanging low and catching on packed snow/ice in the winter.
Added the Swagman XC-2 bike rack. Holds my two mountain bikes very securely.
Nice combo. I highly recommend both.
This hitch receiver works well!
I’m like a one arm paper hanger because I got a steel ball in my left shoulder that don’t work great .
I blocked the the hitch up with 2 X 4’s and I also had a jack on wheels that helped. Everything lined up and all the bolts went in great . I did have some trouble when it came to cranking down the bolts down good but that’s was due to a bad arm .
I’m pushing 78 come May so if I can do it anyone can .
After a year, this hitch is still working great. Though it was a bit of a pain to get on there, it doesn't seem like it's going to budge at all! I use it with a Swagman XC bike rack with two somewhat large mountain bikes and haven't had a single problem yet.
It’s been a year and we’re still super happy with our trailer hitch! Very good quality and great purchase!
Great addition to my KIA soul 2014.
Definitely have a pro install especially with the light attachment wiring.
Did not get a chance to have it installed yet. But Nicole T was so product knowledgeable. Answered all my questions . Definitely use this company for further products.
Needed a hitch to tow my new boat. My soul is still under warranty, and my concerns were adding after market products, and voiding warranty. Especially when it comes to wiring and adding electrical.......needed a solid, no cut and splice system!!
My experience on this site was more than sufficiently informative. I found the photos of installed products to be amazing. Rarely do you get so many angles and actually see what it will be after installation. I did not have to remove or loosen any parts to install the hitch. Could have to ease the process, but found it possible without doing so. Install time,( without any drilling as stated), was about thirty minutes. Barely had time to drink one beer!!
Also purchased the wiring harness offered by CURT, and needed to remove a few parts. Virtually a plug and play, no cutting or splicing wires. Works as stated. My only issue, was the Curt stinger I purchased with the 5" rise. Some poor craftsmanship on the weld, as it is off center and twists slightly to the right. It will work just fine......I'm just a perfectionist when it comes to building and fabricating.
My overall experience was excellent, and I would recommend this e trailer to my friends any time. Shipping was cheap, and right on time.......to the point that I knew exactly when to set a time for the install. Thanks you guy's, for once a co. that delivers, and has the moxy to follow up after the sale.
I will be back as a very happy, and satisfied customer for other product needs!!
It was easy to install and seems great.
EZ install. Works great.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.