bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11402
Our Price: $167.86
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 31 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11402 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (108)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - C11402

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Visible Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately
  • Hitches assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11402 Curt Class 1 Trailer Hitch Receiver

Replaces 11025

Installation Details C11402 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11402

Average Customer Rating:  4.8 out of 5 stars   (108 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:
2020 Kia Optima

Installation of the Curt trailer hitch receiver for my 2020 Kia Optima SX was very similar to the video shown on etrailer.com for the 2018 Optima. The main difference was the dual exhaust on my model. I elected to remove the exhaust hanger brackets from the frame verses pushing the rubber off the hangers. I had some difficulty reinstalling the exhaust brackets to the frame as they were binding against the hitch surfaces even after several attempts to adjust hitch frame and exhaust hangers. I removed some material from the metal brackets of the exhaust hangers by grinding and they seated properly, (see arrows in photo). I’m no spring chicken so the installation took me about 4 hours, excluding beer breaks, and I was working off the ground. I didn’t have to remove or trim the underbody panel or trim the muffler heat shields for this Curt hitch installation, (see photo). The most time consuming part of the job was filing the frame holes for spacer block/carriage bolt installation into the frame. I am very happy with the look and basic installation ease of this hitch. Thank you etrailer and Curt!




by:

Took 2 hours to install. Did not have a floor jack. Installation was straight forward




by:
2016 Hyundai Sonata

Just got done installing on our 2016 Sonata Hybrid Limited. Looks great. Installation video was a huge help. Couple of pictures attached for those that have a hybrid (vs what is depicted in the video). One with the exhaust lowered and all shields removed & ready for the hitch (before holes were enlarged) and two of the installed hitch - from below and behind.

Couple of hints and comments -

1. You will need to enlarge the hole for the bolts to about 1 1/8". Our step drill didn't cut it - had to go heavy duty and since our largest heavy duty bit was 1", had to "wobble" it a bit to get large enough hole. Also, steel is tough so wasn't nearly as easy to drill as the video would have you think!

2. Still not sure why the instructions (written and video) have you remove the center plastic underbody panel only to put it back (with some difficulty/care so as not to damage all the tabs) once the hitch is installed. Perhaps needed on some models but didn't appear to be necessary for ours! (the plastic underbody panel on the driver side did need to be trimmed to fit around the hitch)

3. The heat shield needed some "adjustments" to get it back on over the hitch. We got it to bend a bit as needed so it could be bolted back up with careful use of a bit of 2x4 and a mallet!

Overall appears to be well designed hitch and was not too difficult to install (thank goodness we had the use of a car lift!)


Comments
A year later and still good. Only issue so far has been that it can drag/scrape when making a turn into a steep driveway. But quick adapted by either going slower or using a different driveway!
Tara F - 06/27/2019


by:

Great hitch. Installed relatively easily. Looks good and is built very well. Highly recommend this hitch.




by:
2015 Hyundai Sonata

The installation is pretty easy, the only problem I had was with the clearance of the mounting bracket for the exhaust hanger. The bracket had to be modified in the corner to clear the notch on the hitch. Even after trying to re center the hitch the clearance was not sufficient. Maybe the off set of the mounting holes on the hitch has be changed . Other than that the hitch looks great.




by:

This hitch is as easy to install as the product description says. I had it installed in about an hour alone laying near my garage floor. This is the third hitch I’ve installed on my vehicles from etrailer.com. The descriptions are accurate and the videos are extremely helpful. On my 2018 Kia Optima i found it easier to remove the back exhaust hanger to get the hitch loose mounted.




by:
2017 Hyundai Sonata

Quality of the hitch is great and installation was pretty easy. The only part that slowed me down was the purchase of a step drill bit to enlarge the holes in the car's frame to fit washers through for bolt attachment. 2017 Sonata hybrid.




by:

Excellent quality trailer hitch receiver!!! I'm glad I purchased everything from here for both my vehicles!!! It's only to pull a small mc trailer but absolutely no issues and no complaints from me!!!




by:

Watched etrailer's videos online which helped me choose between this and the Draw-tire brand for my application. Ordered it and it shipped fast. Very good installation instructions but also the video installing instructions on their webpage that I watched before it even showed up. All and all it took me 1 hour to install. I will say I also have a lift and a shop so that probably sped the process up a bit. But from order to delivery it was a good experience all together and I will definitely use them to order the hitch for my wives van.


Comments
1 Year later and this system is still holding up awesome. Works great for my mountain bike set up but also use it to pull a non running vehicle in and out of my garage. I would definitely recommend this company to anyone in the market for a hitch. They really seem to have it figured out.
Steven R - 06/17/2020


by:
2019 Hyundai Sonata

I own a Hyundai Sonata and found myself needing to lug kids bikes around as well as my own. The bike rack I found required a Class-1 hitch which is hard to come by for my car. I found one on eTrailer and it has been a year and still works great.

My car is not made to have a hitch so you have to make some modifications but the instructions were excellent and had all the necessary parts. The one thing I will say is you definitely need a grinder or whatever to cut the hole out for the rear mounting points. We only had a dremel on hand and went through several disks and added an extra 60-90 minutes to the job (ugh).

The only drawback is a bike rack can scrape on a steep driveway especially if it’s carrying weight, but it’s also a sedan so I’m not knocking the product.




by:

The purchase was easy. Customer service was great at time of purchase and install was a breeze. Use it all the time with a bike rack.




by:
2018 Hyundai Sonata

Seems like a good product overall. I read the instructions and watched the video before and during. I had previously installed a hitch on a different vehicle. I don’t hav3 the advantage to have my car up above my head. Though I took my time and had my wife available to assist. Still took close to 3 hours! There were differences between the instructions and my car. Mine in a Sonata SE. Soonly one muffler and plastic on the driver’s side. Laying under the car and boring out the hole above the muffler more difficult in close quarters. On the driver’s side, the plastic cannot be reinstated with the hitch in place. My other concern comes with use of a 2” adapter to add the bike rack. The adapter fitting into the 1 1/4” receiver is loose, which will allow the bikes and rack to bounce around!




by:

So happy we bought straight from etrailer. Super fast.. super friendly.. seriously super communication and incredibly fast shipping. Would have taken weeks on [online]. Got it in only a few days at compatible prices. Excellent job people at etrailer!!!
I just wish your hitch for 2018 BMW i3s was cheaper lol.




by:

It just WORKS! Easy install, fits perfectly, no issues. I couldn't be happier with this hitch receiver.




by:

Shipment arrived on time! I have been an Automotive Technician for about 40 years. I watched the installation video online and then did the hitch install on my car. The video was exactly as my install went. Every part was as described and all the parts fit perfectly! Excited to try it out for the first time soon.


Comments
Dont really know! Shortly after I installed it, we needed a pickup truck, so we traded in the car. It looked good but never got used.
Steve - 12/10/2021


by:
2019 Hyundai Sonata

Installation went very well and I'm especially pleased with how tight this fits to the rear bumper. It's barely noticeable once installed. No modifications to the heat shield were needed and only a slight trimming of the underbody panel was needed. As usual, etrailer comes through again with another high-quality product!




by:
2014 Nissan Frontier

So far so good. Easy to tow lightweight trailers. Mainly got it for my Jetski. In total my ski and trailer are probably around 800-900lbs. A little nervous about the wear and tear on my Kia. I don’t plan on using it often. The transmission and shocks are bound to have a short life I’m sure. Anyhow, I knew what I was doing before I installed everything.




by:

Great installation video.
The web site
is very usable with tons of helpful information.
Lots of offers for assistance either by phone, email or chat.
The prices were very competitive.
Your communication during the sales process was outstanding.


Enlarging the holes during my installation took more time than I expected.




by:
2016 Hyundai Sonata

Great looking hitch at the lowest possible price.
Took about 2 hours to install by myself. The online installation video shows just how easy it is. and there were no hidden surprises.
What is hidden is the hitch in my photo, it tucks nicely under the bumper and is hard to photograph.....just the way I wanted it.

I can't say enough about etrailer dot com.
Ordered on Sunday, delivered on Wednesday and installed Thursday evening.




by:

Frankly, the shipping box was destroyed, the hitch was protruding out of torn cardboard. I have not inspected it yet for damage or to see if the hardware is still present. Hopefully it isn't bent and aligns to the car's mounting points. It is pretty banged up.


Comments
I will have our customer service team reach out to you. If the hitch is flexed where the side brackets are knocked out of alignment then we do have a FAQ that can assist with moving the side brackets of the hitch back into alignment.
-- Etrailer Expert Jenny N - 11/30/2021


by:

Solid well made hitch. Fully recommended this hitch.




by:
2017 Kia Optima

Unlike most, this company actually has their [stuff] together. They provide a great product with straight forward instructions. I didn't have to wait 6 months to get it due to "shortage" the installation was smooth an simple.




by:
2016 Hyundai Sonata

My Hitch for my 2016 Sonata arrive yesterday.
The
box protected the metal just fine with no scratches or damage as far as I can tell.
I plan to install the hitch next week, so I will be responding one more time after I get it installed.

Bye for now,

John B




by:

As described and delivery was fast. Happy with this item.


Comments
Working great no problems just like it came out of the box
Sonia - 08/13/2022


by:

This was very easy and straight forward to install. I had 1 helper and together we had it installed in short order. I watched a video before hand and it made it very easy. Seems to be a quality product. 2 thumbs up!



25
108
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Does Curt Hitch # C11402 Fit 2016 Hyundai Sonata Plug-in Hybrid
    We recently spoke with Curt and they told us that the hitch # C11402 does fit the plug in hybrid models of the 2016 Hyundai Sonata like what you have so it would fit and work well.
    view full answer...
  • Recommended Trailer Hitch for 2017 Kia Optima Hybrid
    We do have a couple of trailer hitches available for your 2017 Kia Optima Hybrid but I specifically recommend the Curt Class I # C11402. This hitch allows for the easiest installation on your Optima without the need for any drilling, it features a superior black powder coat finish to provide rust resistance, and it's made right here in the USA. I did verify with Curt that it is confirmed to fit your Hybrid model. I have attached the complete installation instructions that you can take...
    view full answer...
  • How High Does Curt Hitch C11402 Sit Above Ground On 2019 Hyundai Sonata
    When we installed the Curt hitch # C11402 on a similar 2018 Hyundai Sonata to your 2019 model we found that from the top of the hitch down to the ground measured 10-1/2 inches. Since Class 3 hitches are only available for higher capacity vehicles that are much larger non are available. Also we do not have any multi-fit hitches that would be reasonable to try and fit on your vehicle either.
    view full answer...
    Image 1 for
  • Where to Trim Underbody Panel On 2016 Hyundai Sonata For Curt Hitch Install
    I was able to get an updated version of the installation instructions of the Curt Trailer hitch part # C11402 for the 2016 Hyundai Sonata with under body panel. The the 2-3/4" X 5-1/2" square is cut out between the tabs on the panel like in the attached photo.
    view full answer...
    Image 1 for Image 2 for
  • Does The Curt Receiver item # C11402 Come with Fishwire and Necessary Tools to Install?
    The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # C11402 comes with the fishwire and all necessary hardware but not the socket wrench, 10 mm socket, or prybar you will need to complete your install. I have linked the installation instructions.
    view full answer...
  • Trailer Hitch for 2016 Hyundai Sonata
    The only trailer hitches available for a 2016 Hyundai Sonata are Class I, 1-1/4" hitches such as the Curt # C11402. While the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD can be used it will reduce the capacity of the hitch by 50 percent. That means the most your carrier and mobility scooter could weigh combined is 100 lbs.
    view full answer...
  • Differences Between Curt and Draw-Tite Hitches for 2019 Hyundai Sonata
    There are a few differences. First and foremost, the Curt # C11402 is a fit for all 2019 Sonata models, while the Draw-Tite # 24965 won't fit Hybrid models or models manufactured in Korea (If first digit of VIN is a 'K', vehicle was manufactured in Korea). Both hitches have identical capacities and would install in a similar manner, but the Curt model uses a round crosstube, while the Draw-Tite uses a square crosstube. Some folks consider the round crosstube to be more aesthetically pleasing. As...
    view full answer...
  • Which Trailer Hitch for Bike Rack on 2019 Hyundai Sonata
    Both hitches will install in a similar manner, and have identical weight capacities. The Draw-Tite # 24965 uses a crossbar manufactured out of square tubing while the Curt # C11402 has a round tube crossbar. Most folks consider the round tube crossbar to be more aesthetically pleasing, but that's a matter of opinion. The Draw-Tite # 24965 won't be a fit for Korean manufactured models, so if your Sonata's VIN begins with a 'K', you'll want to go with the Curt # C11402. So, the primary...
    view full answer...
  • How To Run Power Wire for Trailer Wiring Harness On a 2019 Hyundai Sonata
    The trailer wiring harness I recommend for a 2019 Hyundai Sonata is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118762 which is almost entirely plug-n-play. In regards to installation, the two pigtails plug in behind the taillights, the white wire needs to be grounded, then the black power wire gets run to the battery. In regards to the exact path to take, neither we nor the manufacturer provide instructions for this because it varies so much from install...
    view full answer...
  • Recommended Hitch for 2020 Kia Optima PEV
    I have a solution for you, but the Draw-Tite # 24965 has not been confirmed as a fit on the Plug In models of the 2020 Kia Optima. However, the Curt # C11402 has been confirmed and would be my recommendation anyways because of the more durable powder coating that Curt applies to their hitches; this ultimately helps protect the hitch from dings and scratches that might otherwise make it more susceptible to corrosion. I've linked a short review and installation video of this hitch for you...
    view full answer...
  • What Ball Mount to Use with Curt Hitch C11402
    With Class I hitches like the # C11402 you have to use the recommended ball mount from Curt which is the part # C45521. Using a different ball mount would potentially damage the hitch since the length would be different and the leverage might cause damage.
    view full answer...
  • Difference of Curt and Draw-Tite Hitches for 2018 Hyundai Sonata
    The Draw-Tite # 24965 and Curt # C11402 are a lot alike. They both install on your 2018 Hyundai Sonata in basically the same fashion and have the same weight capacities. They do look a little different because the Draw-Tite has a square cross tube and the Curt's is round but this won't change the functionality at all. The biggest difference for me is that the Curt needs a support strap if you're using it for anything other than trailering. So if you're carrying a bike rack, cargo carrier,...
    view full answer...
    Image 1 for
  • Trailer Hitch for 2017 Hyundai Sonata Plug-In Hybrid
    I have good news! The Curt Class I Trailer Hitch Receiver # C11402 is confirmed to fit your 2017 Hyundai Sonata Plug-In Hybrid. We have verified this with Curt. This custom hitch will line right up to existing holes in the vehicle's frame rails for a no-drill installation to provide you with a 1-1/4 inch receiver that has a 2,000 pound towing weight capacity. You will also want to verify the capacity of the vehicle itself by checking your copy of the owner's manual. I have attached an...
    view full answer...
  • Recommended Trailer Hitch for a 2018 Kia Optima Plug-In Hybrid
    The best trailer hitch we have for your 2018 Kia Optima Plug-In Hybrid is the Curt Trailer Hitch Receiver part # C11402. This hitch is a custom fit that installs using pre drilled holes in the frame rail. If you will be using this hitch for a bike rack or cargo carrier then you should also use the Curt Cam Buckle Stabilizing Strap part # 18050 as this is going to help support the accessory and place less stress on the vehicle. If you do not want to use the Curt Cam Buckle Stabilizing...
    view full answer...
  • Will Curt Trailer Hitch Fit a 2015 Hyundai Sonata 2.0 Turbo
    Curt trailer hitch # C11402 is listed as a fit for all models of the 2015 Hyundai Sonata so that would include your turbo model as well. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load...
    view full answer...
  • Do Trailer Hitches Install the Same Way on a 2017 Hyundai Sonata Hybrid Compared to Gas Only Models
    Provided that your 2017 Hyundai Sonata is not a plug-in hybrid Curt trailer hitch # C11402 instructions, linked for reference, will be the same for hybrid and non-hybrid models alike. The 2016 and 2017 models may have some differences but they are built on the same platform/chassis. If you plan on using the hitch for a cargo carrier or bike rack I actually recommend Draw-Tite hitch # 24965 for 2 reasons. First, the Curt hitch requires the use of a stabilization strap # 18050 when using...
    view full answer...
  • Will Draw-Tite or Curt Hitch for 2019 Hyundai Sonata Work Best with Bike Rack
    For your 2018 Hyundai Sonata, your best option is to go with the Draw-Tite # 24965 trailer hitch for a couple of reasons. The Draw-Tite hitch will offer you 1 extra inch of ground clearance and while this may not seem like much, it can make a difference when hitting a bump on the road or trying to drive up a steep driveway with a vehicle with already low ground clearance, such as your Sonata. Also, Curt strongly recommends the use of a stabilizing strap # 18050 when using the # C11402...
    view full answer...
  • Difference Of Curt And Draw-Tite Hitches For 2018 Hyundai Sonata
    Both the Curt Trailer Hitch Receiver # C11402 and Draw-Tite Sportframe Trailer Hitch Receiver # 24965 are high quality hitch options that are a confirmed fit your 2019 Hyundai Sonata. That said my recommendation is the Draw-Tite. The Draw-Tite # 24965 will not fit models made in Korea so that is important to check. These hitches both have the same capabilities but the only difference in look is the square receiver tube of the Draw-Tite vs. round tube of the Curt. The Curt is slightle...
    view full answer...
  • Can I Move The Curt Trailer Hitch Receiver C11402 From a 2018 Sonata to a 2020 Kia Optima?
    Yes, the Curt Trailer Hitch Receiver # C11402 that you have on your 2018 Hyundai Sonata SEL will also fit your 2020 Kia Optima as they use the same chassis. You will need to order a Replacement Hardware Kit # RHK to get new nuts, bolts and the square hole spacers. The hardware for a receiver is only designed to be installed once and should not be reused. You will need a T-One Vehicle Wiring Harness # 118453 if you will be doing any trailer towing or have a hitch mounted accessory that...
    view full answer...
  • Recommended Hitch & Bike Rack For The Hyundai Sonata
    The hitch options for the Sonata are pretty visible but the Curt Trailer Hitch Receiver # C11402 is our most hidden hitch. The distance from the center of the hitch pin hole to the outermost part of the rear bumper is 3 3/4" and the distance from the top inside edge of the receiver tube opening to the ground is 11 1/2". There is no drilling required for installation, the access holes may need to be enlarged by drilling, filing, or rotary tool. The exhaust must be temporarily lowered for...
    view full answer...
  • Hitch for Bike Rack for 2016 Hyundai Sonata Plug In hybrid
    The Curt Trailer Hitch Receiver part # C11402 is a confirmed fit for your 2016 Hyundai Sonata Hybrid. It will work out really well for your bike rack as well but keep in mind a Class 1 hitch is only rated for use with up to a two bike rack. The Kuat Beta Folding 2 Bike Aluminum Rack for 1-1/4" Trailer Hitches part # B202-114 is an excellent choice in bike racks if you do not already own one. I've attached a video on the rack and the hitch installation for you to check out.
    view full answer...
  • Hitch Options for a 2021 Kia K5
    For your 2021 Kia K5, you will need the Draw-Tite # DT63MR. The Curt # C11402 is specific to the Optima line as the 2021 K5 is wider, lower, and longer than the 2020 Optima, so the hitches are quite different between the 2 vehicles.
    view full answer...
  • 2017 Hyundai Sonata Trailer Hitch Fit for Hybrid Model
    We do! The correct hitch for your 2017 Hyundai Sonata Hybrid is the Curt Class I Trailer Hitch Receiver # C11402. This is compatible with both the Hybrid and non-Hybrid models. If you were planning on using this for a bike rack I highly recommend using the Kuat Transfer V2 Bike Rack # KU74FR because it has a unique U-Shaped frame that makes it much easier to load and unload bikes. Attached is an installation video of the Curt hitch on a 2018 Sonata and a review video of the Transfer V2...
    view full answer...
  • Hitch for Bike Rack for 2018 Hyundai Sonata
    For lighter duty vehicles like your 2018 Hyundai Sonata there are only 1-1/4 inch hitches available like the Curt # C11402 that you referenced. Best option would be to go with a bike rack that fits this hitch size like with the Hollywood Racks Trail Rider part # HR200Z.
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob H
Video by:
Jacob H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.